JVC HR-J682EK, HR-J680EK manual Other Problems

Page 60

60

subsidiary information

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

OTHER PROBLEMS

1.Whistling or howling is heard from the TV during camcorder recording.

2.When scanning channels, some of them are skipped over.

3.The preset cannot be changed.

¥The camcorderÕs microphone is too close to the TV.

¥The TVÕs volume is too high.

¥Those channels have been designated to be skipped.

¥Recording is in progress.

Position the camcorder so its microphone is away from the TV. Turn the TVÕs volume down.

If you need the skipped channels, restore them.

Press to pause the recording, change presets, then press .to resume recording.

4.Channel settings that were made manually seem to have changed or disappeared.

5.No channels are stored in the VCRÕs memory.

¥After the manual settings were made, Auto Channel Set was performed.

¥The TV aerial cable was not connected to the VCR when Auto Set Up was performed.

¥The fully-wired 21-pin SCART cable was not connected between TV and the VCR when Preset Download was per- formed.

Perform manual setting again.

Turn off the VCR once and connect the TV aerial cable to the VCR properly, then turn on the VCR again. Then perform Auto Setup again (☞Êpg.Ê10).

Turn off the VCR once and connect the fully-wired 21-pin SCART cable to the VCR properly, then turn on the VCR again. Then perform Preset Download again (☞Êpg.Ê11).

Image 60

Contents HR-J680EK HR-J682EK Safety Precautions If in doubt Ñ consult a competent electricianMoisture Condensation Some DoÕs And DonÕts On The Safe Use Of EquipmentContents Rear panel Diagram Key Front PanelWelcome to JVC Getting Everything ReadyPerform Auto Setup pg Auto Setup Three-Step Quick StartPreset Download Three step quick startCheck the Results Finish OffBasic Features Playback Load a Video CassettePlay Stop & EjectVideo Heads Cleaning Rewind and Fast ForwardPlayback Features Pause During PlaybackSingle Frame Movement Slow Motion Variable Speed SearchHigh Speed Search Recording Choose a ProgrammeSet the Tape Speed Start RecordingResetting the Counter Display Tape Remaining TimeChange Display Information Instant Timer Recording Recording Resume FunctionGet to the Video Plus + Screen Enter the PlusCode NumberPress O. The Video Plus+ Program screen Engage Timer Mode Return to Normal ScreenExpress Timer Programming Get to the Programme ScreenEnter Programme Details AUX Check, Cancel & Change Programmes Press c, then press oto disengage the timer modeWhen Programmes Overlap Each Other Basic features Advanced Features Picture Quality Manual TrackingPicture Control Recording and Playback Using B.E.S.T Avoiding B.E.S.T. Time DelayB.E.S.T PictureÊSystem Turning B.E.S.T. on or OFFSound Modes Nicam Stereo and Bilingual BroadcastsSoundtrack Selection Finding Specific Scenes Skip SearchIndex Search Instant ReViewTV Auto Power On Link FunctionsNexTView Link VCR Auto StandbyDirect Rec Satellite Receiver Control Settings Installing Satellite ControllerSetting satellite receiverÕs brand CodeCheck Result of Test Auto Satellite Auto Record from Satellite ReceiverAdvanced features Select Setting EditingEditing Using Another VCR Set edit mode See Picture Control on pageÊ30Editing from a Camcorder Start recorder Press TOther Functions On-Screen Display O.S.DPower Save Mode Auto SP aLP TimerAuto Timer Repeat PlaybackNext Function Memory Connection to a Stereo System Stereo AmplifierAccess Video Channel Mode Exit Video Channel Set ModeVideo Channel Set Set Video ChannelAuto Channel Setup Tuner SetManual Channel Setup Change Station Name Delete a ChannelChange Station Preset Position Fine-Tuning Stored Channels TV Station ID GuideTV Station Channel Number Guide BBC1 BBC2 ITV CH4 CH5Setting the Clock Clock SetManually Setting Guide Program Numbers Guide Program NumbersQuestion and Answers PlaybackTroubleshooting Symptom Possible CauseRecording Other Problems List of Terms Memo Memo HR-J680/682EK