JVC HR-DD858E/EH, HR-J758E/EH specifications Basic Recording

20EN

RECORDING

Basic

Recording

Turn on the TV and select the VIDEO channel (or AV mode).

			LAY	TV PROG
		PAUSE
TV	PROG	RECORD		STOP/EJECT

			– –:– –
	1	2	3
			2
NUMBER	4	5	6
	7	8	9
		0	4

TV PROG

SP/LP

1

PLAY

PAUSE

RECORD

3

STOP

Recording Resume Function

TV signals being received by the recorder’s built-in tuner can be recorded onto a video tape. You can “capture” a TV programme using your video recorder.

1		LOAD A CASSETTE
	Insert a cassette with the record safety tab intact.
		● The counter is reset to 0:00:00 and the recorder
		power comes on automatically.
2		CHOOSE A PROGRAMME
	Press TV PROG +/– or the NUMBER keys to select the
		channel you wish to record.
		● The TV PROG dial can also be used to select a channel.
3		SET TAPE SPEED
	Press SP/LP ( ). Check the SP/LP indicator on the
		recorder display panel to confirm the selected tape
		speed.
		● The HR-J758E/EH owners can use the SP/LP button
		on the recorder's front panel as well.
4		START RECORDING
	Press and hold RECORD and press PLAY on the remote
		control, or press RECORD on the recorder.
		B.E.S.T. takes place at the beginning of both the
		first SP and the first LP recording after inserting the
		cassette (☞ pg. 24).
		PAUSE/RESUME
5		RECORDING
	Press PAUSE. Press PLAY to resume recording.
6		STOP RECORDING
	Press STOP on the remote control or STOP/EJECT on
		the recorder. Then press STOP/EJECT to remove the
		cassette.

Accidental erasure prevention

●To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab

If there is a power outage during recording (or Instant Timer Recording or timer recording), the recording will resume automatically when power is restored to the recorder unless the recorder's memory backup has expired.