JVC HR-J758E/EH Connecting Using a Decoder, Select Input Mode, Connect Decoder, SET Tuner

Page 43

Connecting/

Using A

Decoder

EN43

The AV2 IN/DECODER connector can be used as an input terminal for an external decoder (descrambler). Simply connect a decoder and you can enjoy the variety of programming that is available through scrambled channels.

SELECT INPUT MODE

1 Set "AV2 SELECT" to "DECODER". (☞ pg. 37)

CONNECT DECODER

Connect your recorder's AV2 IN/DECODER connector

2 to the decoder's Euroconnector using a 21-pin SCART

TV Receiver

RF Cable (provided)

TV

Aerial

Cable

		cable.

3		SET TUNER
	Perform the procedure as described in "When Receiving
		A Scrambled Broadcast" on page 49.

NOTE:

AV1 IN/OUT

AV2 IN/DECODER

Satellite antenna

Satellite tuner

Decoder

When Connecting A Satellite Tuner . . .

. . . if you don't have a decoder connect the satellite tuner directly to the video recorder's AV2 IN/DECODER connector.

. . . if you have a decoder, first connect the decoder to the decoder input of the satellite tuner, then connect the satellite tuner's output to the recorder's AV2 IN/DECODER connector. Refer to the instruction book for the satellite tuner and decoder.

. . . set "AV2 SELECT" to "AV2". (☞ pg. 37)

. . . to view a programme via the satellite tuner, select L-2 mode by pressing NUMBER keys and/or TV PROG so that

"L-2" appears on the display panel.

Image 43

Contents HR-DD858E/EH HR-J758E/EH For Italy Safety PrecautionsDo not place the recorder Connect Recorder to Mains Check ContentsBasic Connections Situate RecorderInternational Telephone Country Code Auto Set UpIf you are referring to the front display panel If you are referring to the on-screen displayYour TV to the Video Channel. Refer to Language CodeVia an RF cable only RF connection Video ChannelJust Clock on If both auto channel set and auto clock set have failedLanguage for the on-screen display Just ClockLanguage On-Screen Displays Access Main Menu ScreenAccess Mode SET Screen ENABLE/DISABLE ON-SCREEN DisplaySelect Power Save Mode Power Save ModeOK or % Appears only with HR-DD858E and HR DD858EH Colour System SetAbout Ntsc Playback OK or%Start Playback Basic PlaybackLoad a Cassette PointActivate HIGH-SPEED Search Playback FeaturesPause During Playback Still Picture/Frame-By-Frame Playback For HR-J758E/EH High-Speed Turbo Search For HR-J758E/EHSlow Motion For HR-J758E/EH Manually Adjust TrackingActivate 3R Picture Override Automatic TrackingSections Skip Over UnwantedActivate Instant Review During Playback Activate SpatializerSpatializer Soundtrack SelectionRepeat Playback Press Pause Press TV Prog + or so that the vibration stops Audio signal during TimeScanTimeScan Variable-Speed Search HR-DD858E/EH onlyHR-DD858EHR-DD858EH TimeScanTimeScan Audio Speed SP Speed LP Audio outputBasic Recording Recording Features To Record Stereo And Bilingual Programmes A2 Receiving Stereo Bilingual ProgrammesType of Broadcast On-screen Display Being Received Hi-Fi Audio Recording Level Control HR-DD858E/EH only Adjust AudioS.T. Picture System Select B.E.S.T. ModePreparation During B.E.S.T RecordingPlayback Or press Record on the recorderTimer Programming Satellite Tuner Users Timer WarningTime Express Timer ProgrammingStart Time Enter Programme StopVPS/PDC Recording SET VPS/PDC ModeTimer Mode Engage RECORDER’STime you press Check, Cancel And Replace ProgrammesPress Press Again to check More information. EachAuto Timer Auto SP→LP TimerFor Example Automatic Satellite Programme Recording Prog REC ModeBefore performing the following steps RE-SUPPLY Power Remote Control FunctionsRemove Power Supply SET Remote Control CodeTV Prog + TV/VCR, TV +/- VolumeSET TV Brand Code Operate TVSatellite Tuner Brand Code Satellite Tuner Multi-Brand Remote ControlOperate Satellite Tuner Before you startStart Source Player SET Recording DECK’S Input ModeEdit To Or From Another Video Recorder Make ConnectionsAV2 Select Setting Start Recorder SET RECORDER’S Input ModeEdit From a Camcorder Start CamcorderStart Dubbing SET Input ModeLocate Start Point Engage Audio DubbingProg Reset the CounterInsert Editing Locate END PointStart Editing Engage Insert EditingEND Insert Editing Satellite Tuner Unit Connection To Satellite TunerBack of Recorder SET Tuner Connecting Using a DecoderSelect Input Mode Connect DecoderAUX in or Tape Monitor Connecting Using a Stereo SystemSET Video Channel Access Video Channel SET ModeExit Video Channel SET Mode Video Channel SetAuto Channel Set Tuner SetView Confirmation Screen Perform Auto Channel SETStoring Channels Manually Enter NEW Channel InformationDelete a Channel When Receiving a Scrambled BroadcastChange Station Channel Position Select NEW Station Access ManualSwitch Stations Channel SET ScreenStation Name TV Station And ID ListPress OK twice. The Manual Channel Set screen appears Perform TuningFine-Tuning Channels Already Stored Select Channel to FINE-TUNEGuide Program Number Set Showview SetupNumber Enter Receiving Channel Position NumberSET Date and Time Access Initial SET ScreenAccess Clock SET Screen Clock SetSET Clock Data Source Channel Position SET Just ClockStart Clock Operation If you’re using the RF OUT connec- tion No power is applied to the recorderRemote control wont function Mains power cord is discon- nectedTimer Recording Ä remain lit on the display panel. Is there Problem? EN Questions and AnswersIndex HR-DD858E/EH only EN IndexRemote Control IN/OUT x 1, IN/DECODER x Maximum recording timeFrequency synthesized tuner Memo International Telephone Language Code Ex. Francais is selected for BelgiumFor More Information see INSTRUCTIONS/P4

Related manuals

Manual 64 pages 10.32 Kb