JVC HR-DD858E/EH, HR-J758E/EH specifications Automatic Satellite Programme Recording, Prog REC Mode

Page 32

32ENTIMERRECORDING(cont.)

Automatic

Satellite

Programme

Recording

ATTENTION

●Be sure not to turn on the satellite tuner before the programme is executed; otherwise, the recorder will start recording when the satellite tuner's power is turned on.

●If you have connected another appliance other than a satellite tuner to the AV2 IN/DECODER connector, be sure not to engage the Auto Satellite Prog Rec mode; otherwise, the recorder will start recording when the connected appliance's power is turned on.

●Auto Satellite Prog recording and timer-recording cannot be done at the same time.

This facility allows you record automatically a satellite programme which is timer-programmed on your external satellite tuner. Connect a satellite tuner to the recorder's AV2 IN/DECODER connector and programme the timer on the satellite tuner; the recorder starts recording when the signals input from the satellite tuner to the AV2 IN/DECODER connector, and when there is no input signals the recorder stops recording and the power shuts off.

Before performing the following steps:

●Make sure the satellite tuner is connected to the recorder's AV2 IN/DECODER connector. (☞ pg. 42)

●Programme the timer on the satellite tuner.

●Insert a cassette with the safety tab in place.

SELECT AV2 SELECT MODE

1 Set "AV2 SELECT" to "AV2" (☞ pg. 37).

SET TAPE SPEED

2 Press SP/LP ( ) to set the tape speed.

ENGAGE AUTO SATELLITE

PROG REC MODE

Press and hold REC LINK for about 2 seconds. The

button lights up and the recorder turns off

3 automatically.

● To disengage the Auto Satellite Prog Rec mode, press

REC LINK. The button's light goes off.

● If the recorder's power is off, it is not possible to

engage the Auto Satellite Prog Rec mode.

NOTES:

●Auto Satellite Prog recording is not possible with the AV1 IN/OUT connector.

●For timer programming of the satellite tuner, refer to the instruction manual of the satellite tuner.

●Auto Satellite Prog recording is not possible if your satellite tuner does not have a timer.

●The button's light blinks while Auto Satellite Prog recording is in progress.

●Pressing the recorder's button while Auto Satellite Prog recording is in progress turns off the recorder's power and disengage the Auto Satellite Prog Rec mode.

●If there are more than one satellite programme you wish to record with Auto Satellite Prog Recording, it is not possible to set the different tape speed per each; the tape speed selected in step 2 will be applicable to all the programmes for Auto Satellite Prog recording.

●The B.E.S.T. system (☞ pg. 24) does not work while Auto Satellite Prog recording is in progress.

●Just Clock (☞ pg. 54) does not work when the Auto Satellite Prog Rec mode is engaged.

●Depending on the type of satellite tuner, the recorder may not record a slight portion of the beginning of the programme or may record slightly longer than the actual length of the programme.

●If you engage the Auto Satellite Prog Recording mode when the satellite tuner's power is on, the recorder will not start Auto Satellite Prog recording even though the button's light blinks. When the satellite tuner shuts off once and is turned back on again, the recorder starts recording.

●When the Auto Satellite Prog Rec mode is engaged or the recorder's power is turned off after Auto Satellite Prog recording is finished, the recorder will not enter the Timer mode even though "AUTO TIMER" is set to "ON".

●After Auto Satellite Programme recording, the number of recorded programmes will not be displayed on the front display panel for the Instant ReView function (☞ pg. 15).

●You can also record a programme from your cable system in the same way if the system has a timer.

Page 31 Page 33
Image 32
Page 31 Page 33
Contents HR-DD858E/EH HR-J758E/EH Do not place the recorder Safety PrecautionsFor Italy Check Contents Basic ConnectionsSituate Recorder Connect Recorder to MainsAuto Set Up If you are referring to the front display panelIf you are referring to the on-screen display International Telephone Country CodeLanguage Code Via an RF cable only RF connectionVideo Channel Your TV to the Video Channel. Refer toIf both auto channel set and auto clock set have failed Language for the on-screen displayJust Clock Just Clock onLanguage Access Main Menu Screen Access Mode SET ScreenENABLE/DISABLE ON-SCREEN Display On-Screen DisplaysOK or % Power Save ModeSelect Power Save Mode Colour System Set About Ntsc PlaybackOK or% Appears only with HR-DD858E and HR DD858EHBasic Playback Load a CassettePoint Start PlaybackPause During Playback Playback FeaturesActivate HIGH-SPEED Search Slow Motion For HR-J758E/EH High-Speed Turbo Search For HR-J758E/EHStill Picture/Frame-By-Frame Playback For HR-J758E/EH Adjust Tracking Activate 3R PictureOverride Automatic Tracking ManuallyActivate Instant Review Skip Over UnwantedSections Activate Spatializer SpatializerSoundtrack Selection During PlaybackRepeat Playback Audio signal during TimeScan TimeScanVariable-Speed Search HR-DD858E/EH only Press Pause Press TV Prog + or so that the vibration stopsTimeScan TimeScan AudioSpeed SP Speed LP Audio output HR-DD858EHR-DD858EHBasic Recording Recording Features Type of Broadcast On-screen Display Being Received Receiving Stereo Bilingual ProgrammesTo Record Stereo And Bilingual Programmes A2 Adjust Audio Hi-Fi Audio Recording Level Control HR-DD858E/EH onlyPreparation Select B.E.S.T. ModeS.T. Picture System Recording PlaybackOr press Record on the recorder During B.E.S.TTimer Programming Timer Warning Satellite Tuner UsersExpress Timer Programming Start TimeEnter Programme Stop Time SET VPS/PDC Mode Timer Mode Engage RECORDER’S VPS/PDC RecordingCheck, Cancel And Replace Programmes PressPress Again to check More information. Each Time you pressFor Example Auto SP→LP TimerAuto Timer Before performing the following steps Prog REC ModeAutomatic Satellite Programme Recording Remote Control Functions Remove Power SupplySET Remote Control Code RE-SUPPLY PowerTV/VCR, TV +/- Volume SET TV Brand CodeOperate TV TV Prog +Satellite Tuner Multi-Brand Remote Control Operate Satellite TunerBefore you start Satellite Tuner Brand CodeSET Recording DECK’S Input Mode Edit To Or From Another Video RecorderMake Connections Start Source PlayerAV2 Select Setting SET RECORDER’S Input Mode Edit From a CamcorderStart Camcorder Start RecorderSET Input Mode Locate Start PointEngage Audio Dubbing Start DubbingReset the Counter Insert EditingLocate END Point ProgEND Insert Editing Engage Insert EditingStart Editing Back of Recorder Connection To Satellite TunerSatellite Tuner Unit Connecting Using a Decoder Select Input ModeConnect Decoder SET TunerConnecting Using a Stereo System AUX in or Tape MonitorAccess Video Channel SET Mode Exit Video Channel SET ModeVideo Channel Set SET Video ChannelTuner Set Auto Channel SetPerform Auto Channel SET View Confirmation ScreenEnter NEW Channel Information Storing Channels ManuallyChange Station Channel Position When Receiving a Scrambled BroadcastDelete a Channel Access Manual Switch StationsChannel SET Screen Select NEW StationTV Station And ID List Station NamePerform Tuning Fine-Tuning Channels Already StoredSelect Channel to FINE-TUNE Press OK twice. The Manual Channel Set screen appearsShowview Setup NumberEnter Receiving Channel Position Number Guide Program Number SetAccess Initial SET Screen Access Clock SET ScreenClock Set SET Date and TimeStart Clock Operation SET Just ClockSET Clock Data Source Channel Position No power is applied to the recorder Remote control wont functionMains power cord is discon- nected If you’re using the RF OUT connec- tionTimer Recording EN Questions and Answers Ä remain lit on the display panel. Is there Problem?Index EN Index HR-DD858E/EH onlyRemote Control Frequency synthesized tuner Maximum recording timeIN/OUT x 1, IN/DECODER x Memo For More Information see INSTRUCTIONS/P4 Ex. Francais is selected for BelgiumInternational Telephone Language Code
Related manuals
Manual 64 pages 10.32 Kb
Top Page Image Contents