JVC HR-J668EU Basic Connections, Check Contents, Situate Recorder, Connect Recorder to Mains

Page 3

INSTALLINGYOURNEWRECORDER

EN3

Basic Connections

It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.

CHECK CONTENTS

Make sure the package contains all of the accessories

1 listed in “Specifications” (☞ pg. 53).

SITUATE RECORDER

Aerial terminal

Back of TV

21-pin SCART connector

RF Cable (provided)

21-pin SCART Cable

Mains Power

Cord

TV Aerial Cable

2 Place the recorder on a stable, horizontal surface.
		CONNECT RECORDER TO
3		TV
	The connection method you use depends on the type of
		TV you have.

		RF CONNECTION
		● To Connect To A TV With NO AV Input Terminals . . .
		a– Disconnect the TV aerial cable from the TV.
		b– Connect the TV aerial cable to the ANT. IN jack
		on the rear panel of the recorder.
		c– Connect the provided RF cable between the RF
		OUT jack on the rear panel of the recorder and the
		TV’s aerial terminal.

AV CONNECTION

●To Connect To A TV With AV Input Terminals . . .

a– Connect the aerial, recorder and TV as per “RF

CONNECTION”.

b– Connect an optional SCART cable between the

AV1 IN/OUT socket on the rear panel of the recorder and the TV’s 21-pin SCART connector.

			ENTREE
			ANT. IN
		SORTIE
AV2 ENTREE/DECODEUR	AV1 ENTREE/SORTIE	OUT	ANTENNE
AV2 ENTREE/DECODEUR	AV1 ENTREE/SORTIE	R	ANTENNE
IN/DECODER	IN/OUT		SORTIE
	AUDIO		RF OUT
		L

Rear view

Mains outlet	AV1 IN/OUT

CONNECT RECORDER TO MAINS

4 Plug the end of the mains power cord into a mains outlet.

Make AV connection if your TV has a 21-pin AV input connector (SCART) in order to reduce the possibility of interference. And if you are using a stereo TV, you will need this cable in order to enjoy stereo playback of videotapes.

After you plug the mains power cord into a mains outlet, the Country Set display appears on the TV screen and/or on the

recorder's front display panel when the button on the recorder/remote control is pressed for the first time to power on the recorder; go to page 4 to perform Auto Set Up.

Image 3

Contents HR-J711EU HR-J668EU Do not place the recorder Safety PrecautionsSafety First For ItalyConnect Recorder to Mains Check ContentsBasic Connections Situate RecorderIf you are referring to the on-screen display Auto Set UpEN Initial Settings If you are referring to the front display panelThis Language CodeVia an RF cable only RF connection Your TV to the Video Channel. Refer toENU Preset DownloadJust Clock on If both auto channel set and auto clock set have failedLanguage for the on-screen display Just ClockLanguage Return to Normal Screen Access Main Menu ScreenENABLE/DISABLE ON-SCREEN Display On-Screen DisplaysPower Save Mode NexTView Link TV Auto Power OnLink Functions LI NKCounter and tape remaining time readings will be incorrect Colour System SetMode About Ntsc PlaybackStart Playback Basic PlaybackLoad a Cassette PointPlayback Features PlaybackActivate HIGH-SPEED Search Return to Automatic Adjust TrackingOverride Automatic Tracking ManuallyAccess Mode SET Screen Select Picture Control SET ModeEN Playback Basic Recording Recording Features To Record Nicam Stereo And Bilingual Programmes Receiving StereoBilingual Programmes To Record Stereo And Bilingual Programmes A2S.T., then press OK or S.T. Picture SystemEN Recording PreparationRecording PlaybackOr press Record on the recorder EN Timer Recording Timer ProgrammingTimer Warning Satellite Tuner UsersPress SP/LP Time Express Timer ProgrammingBefore performing Express Timer Programming Start TimeVPS/PDC Recording SET VPS/PDC ModeTimer Mode Engage RECORDER’SNext programmes Check, Cancel And Replace ProgrammesPress ä Timer Press Again to check More information. Each Time you pressAuto Timer Auto SP→LP TimerProg REC Mode Automatic Satellite Programme RecordingBefore performing the following steps SET RECORDER’S Input SET Edit ModeEdit From a Camcorder Make ConnectionsStart Source Player Input ModeEdit To Or From Another Video Recorder SET Recording DECK’SAV2 Select Setting RecorderRecorder Player Back of TV Connection To Satellite TunerEN System Connections Satellite Tuner UnitConnector Scart DecoderSet AV2 Select to AV2. pg SET Tuner Connecting Using a DecoderSelect Input Mode Connect DecoderSpeaker Television Mains outlet Connecting Using a Stereo SystemAuto Channel Set Access Auto CH SETTuner Set EN Subsi Diary Sett IngsView Confirmation Screen Perform Auto Channel SETStoring Channels Manually SU Bsidiary SettingsPress %Þ @ #until the item you want to move begins When Receiving a Scrambled BroadcastDelete a Channel Change Station Channel PositionSelect NEW Station Access ManualSwitch Stations Channel SET ScreenTV Station And ID List Select Channel to FINE-TUNE Access Manual Channel SET ScreenPerform Tuning Fine-Tuning Channels Already StoredSET RF Output System Access Video Channel SET ModeExit Video Channel SET Mode Video Channel SetClock Set Turn the Recorder onSET Date and Time Channel Position Default setting is OFF. Set as desired by pressingRecorder is preset to receive clock setting SET Just ClockGuide Program Number Set Showview SetupNumber Enter Receiving Channel Position NumberTroubleshooting EN Roubleshooting Timer RecordingQuest Ions and Answers EN Ä remain lit on the display panel. Is there Problem?Front View J668EU IndexRear View VCR, TV Prog +/-,TV +/-, TV Muting EN IndexPAL-type colour signal and Ccir Provided accessoriesSpeci Fications EMO Memo Ex. Francais is selected for Belgium Auto Set Up referring to the display panel