JVC HR-J668EU, HR-J711EU specifications Troubleshooting EN

Page 47

TROUBLESHOOTINGEN47

Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your video recorder off for repair.

POWER

SYMPTOM

1.No power is applied to the recorder.

2.The clock is functioning properly, but the recorder cannot be powered.

3.The remote control won't function.

TAPE TRANSPORT

SYMPTOM

1.The tape does not run during recording.

2.The tape will not rewind or fast- forward.

PLAYBACK

SYMPTOM

1.The playback picture does not appear while the tape is running.

2.Noise appears during visual search.

3.Noise appears during normal playback.

4.The playback picture is blurred or interrupted while TV broadcasts are clear.

5.Breaks are noticeable in Hi-Fi soundtrack.

RECORDING

SYMPTOM

1.Recording cannot be started.

2.TV broadcasts cannot be recorded.

3.Tape-to-tape editing is not possible.

4.Camcorder recording is not possible.

POSSIBLE CAUSE

●The mains power cord is discon- nected.

●“ä“ is displayed on the display panel with Auto Timer set to "OFF".

●The batteries are discharged.

POSSIBLE CAUSE

●““ is displayed on the display panel.

●The tape is already fully rewound or fast-forwarded.

POSSIBLE CAUSE

●If you’re using the RF OUT connec- tion . . .

. . . the TV receiver’s channel selector is not set to the VIDEO channel.

. . . the recorder's VIDEO channel has not been correctly set.

●If you’re using the AV connection, the TV receiver is not set to the AV mode.

●This is normal.

●The automatic tracking mode is engaged.

●The video heads may be dirty.

●Automatic tracking is engaged.

POSSIBLE CAUSE

●There is no cassette loaded, or the cassette loaded has had its Record Safety tab removed.

●“L-1” or “L-2” has been selected as the input mode.

●The source (another video recorder, camcorder) has not been properly connected.

●All necessary power switches have not been turned on.

●The input mode is not correct.

●The camcorder has not been properly connected.

●The input mode is not correct.

CORRECTIVE ACTION

Connect the mains power cord.

Press the ä button to turn the “ä“ indicator off.

Replace the dead batteries with new ones.

CORRECTIVE ACTION

Press PLAY to turn the ““ indicator off.

Check the cassette.

CORRECTIVE ACTION

If you are using the RF OUT connec- tion . . .

. . . set the TV receiver to the VIDEO channel. (☞ pg. 5)

. . . perform "Video Channel Set". (☞ pg. 43)

If you are using the AV connection, set the TV to its AV mode.

Try manual tracking. (☞ pg. 15)

Consult your JVC dealer.

Engage and adjust tracking manually. (☞ pg. 15)

CORRECTIVE ACTION

Insert a cassette, or using adhesive tape, reseal the slot where the tab was removed.

Set to the desired channel.

Confirm that the source is properly connected.

Confirm that all units’ power switches are turned on.

Set the input mode to “L-1” or “L-2”.

Confirm that the camcorder is properly connected.

Set the input mode to “L-1” or “L-2”.

Image 47

Contents HR-J711EU HR-J668EU Do not place the recorder Safety PrecautionsSafety First For ItalyConnect Recorder to Mains Check ContentsBasic Connections Situate RecorderIf you are referring to the on-screen display Auto Set UpEN Initial Settings If you are referring to the front display panelThis Language CodeVia an RF cable only RF connection Your TV to the Video Channel. Refer toENU Preset DownloadJust Clock on If both auto channel set and auto clock set have failedLanguage for the on-screen display Just ClockLanguage Return to Normal Screen Access Main Menu ScreenENABLE/DISABLE ON-SCREEN Display On-Screen DisplaysPower Save Mode NexTView Link TV Auto Power OnLink Functions LI NKCounter and tape remaining time readings will be incorrect Colour System SetMode About Ntsc PlaybackStart Playback Basic PlaybackLoad a Cassette PointActivate HIGH-SPEED Search Playback FeaturesPlayback Return to Automatic Adjust TrackingOverride Automatic Tracking ManuallyEN Playback Access Mode SET ScreenSelect Picture Control SET Mode Basic Recording Recording Features To Record Nicam Stereo And Bilingual Programmes Receiving StereoBilingual Programmes To Record Stereo And Bilingual Programmes A2S.T., then press OK or S.T. Picture SystemEN Recording PreparationOr press Record on the recorder RecordingPlayback EN Timer Recording Timer ProgrammingPress SP/LP Timer WarningSatellite Tuner Users Time Express Timer ProgrammingBefore performing Express Timer Programming Start TimeVPS/PDC Recording SET VPS/PDC ModeTimer Mode Engage RECORDER’SNext programmes Check, Cancel And Replace ProgrammesPress ä Timer Press Again to check More information. Each Time you pressAuto Timer Auto SP→LP TimerBefore performing the following steps Prog REC ModeAutomatic Satellite Programme Recording SET RECORDER’S Input SET Edit ModeEdit From a Camcorder Make ConnectionsStart Source Player Input ModeEdit To Or From Another Video Recorder SET Recording DECK’SRecorder Player AV2 Select SettingRecorder Back of TV Connection To Satellite TunerEN System Connections Satellite Tuner UnitSet AV2 Select to AV2. pg Connector ScartDecoder SET Tuner Connecting Using a DecoderSelect Input Mode Connect DecoderSpeaker Television Mains outlet Connecting Using a Stereo SystemAuto Channel Set Access Auto CH SETTuner Set EN Subsi Diary Sett IngsView Confirmation Screen Perform Auto Channel SETStoring Channels Manually SU Bsidiary SettingsPress %Þ @ #until the item you want to move begins When Receiving a Scrambled BroadcastDelete a Channel Change Station Channel PositionSelect NEW Station Access ManualSwitch Stations Channel SET ScreenTV Station And ID List Select Channel to FINE-TUNE Access Manual Channel SET ScreenPerform Tuning Fine-Tuning Channels Already StoredSET RF Output System Access Video Channel SET ModeExit Video Channel SET Mode Video Channel SetSET Date and Time Clock SetTurn the Recorder on Channel Position Default setting is OFF. Set as desired by pressingRecorder is preset to receive clock setting SET Just ClockGuide Program Number Set Showview SetupNumber Enter Receiving Channel Position NumberTroubleshooting EN Roubleshooting Timer RecordingQuest Ions and Answers EN Ä remain lit on the display panel. Is there Problem?Front View J668EU IndexRear View VCR, TV Prog +/-,TV +/-, TV Muting EN IndexSpeci Fications PAL-type colour signal and CcirProvided accessories EMO Memo Ex. Francais is selected for Belgium Auto Set Up referring to the display panel