JVC HR-J668EU, HR-J711EU specifications Recording, Playback, Or press Record on the recorder

Page 21

Recording

1

START RECORDING

Press and hold RECORD and press PLAY on the remote,

or press RECORD on the recorder.

DURING B.E.S.T.

 

 

 

 

B.E.S.T. COMPLETE

●The recorder spends approximately 7 seconds assessing the condition of the tape, then begins recording.

NOTES:

●The B.E.S.T. system works for both SP and LP modes only after a tape has been inserted and the Record mode is first initiated. It does not work during recording.

●The B.E.S.T. system does not work while Auto Satellite Prog recording is in progress (☞ pg. 28).

●In the case of timer recording, the B.E.S.T. system works before recording is initiated.

●Once the cassette is ejected, the B.E.S.T. data is cancelled. The next time the cassette is used for recording, B.E.S.T. is re- performed.

●Pressing the recorder's RECORD button while "BEST" is displayed does not start Instant Timer Recording (☞ pg. 18).

ATTENTION

Since the B.E.S.T. system works before recording actually starts, there is a delay of approximately 7 seconds after RECORD and PLAY on the remote are pressed, or RECORD on the recorder is pressed. To make sure you record the desired scene or programme in its entirety, first perform the following steps:

1)Press and hold PAUSE and press RECORD to engage the RECORD PAUSE mode.

●The recorder then automatically checks the condition of the tape and, after approximately 7 seconds, re- enters RECORD PAUSE.

2)Press PLAY to start recording.

●If you want to bypass the B.E.S.T. system and begin recording immediately, set “B.E.S.T.” to “OFF” in step 4 on page 20.

EN21

Playback

The recorder assesses the quality of the tape once you initiate playback.

START PLAYBACK

1 Press PLAY.

●The recorder adjusts the playback picture quality based on the quality of the tape in use.

●B.E.S.T. is active during Auto Tracking. “BEST” appears blinking on the recorder’s display panel.

NOTES:

●When watching a tape recorded with “B.E.S.T.” set to “ON”, it is recommended that you leave B.E.S.T. on during playback as well.

●When watching a rental tape or one recorded on another video recorder, or when using this recorder as the player for editing, set B.E.S.T. to your preference by performing steps 1 through 5 on page 20.

●"BEST" only appears at the beginning of automatic tracking. Even though it doesn't appear after that, the B.E.S.T. function is operative.

Page 20 Page 22
Image 21
Page 20 Page 22
Contents HR-J711EU HR-J668EU Safety First Safety PrecautionsFor Italy Do not place the recorderBasic Connections Check ContentsSituate Recorder Connect Recorder to MainsEN Initial Settings Auto Set UpIf you are referring to the front display panel If you are referring to the on-screen displayVia an RF cable only RF connection Language CodeYour TV to the Video Channel. Refer to ThisENU Preset DownloadLanguage for the on-screen display If both auto channel set and auto clock set have failedJust Clock Just Clock onLanguage ENABLE/DISABLE ON-SCREEN Display Access Main Menu ScreenOn-Screen Displays Return to Normal ScreenPower Save Mode Link Functions TV Auto Power OnLI NK NexTView LinkMode Colour System SetAbout Ntsc Playback Counter and tape remaining time readings will be incorrectLoad a Cassette Basic PlaybackPoint Start PlaybackPlayback Features PlaybackActivate HIGH-SPEED Search Override Automatic Tracking Adjust TrackingManually Return to AutomaticAccess Mode SET Screen Select Picture Control SET ModeEN Playback Basic Recording Recording Features Bilingual Programmes Receiving StereoTo Record Stereo And Bilingual Programmes A2 To Record Nicam Stereo And Bilingual ProgrammesEN Recording S.T. Picture SystemPreparation S.T., then press OK orRecording PlaybackOr press Record on the recorder EN Timer Recording Timer ProgrammingTimer Warning Satellite Tuner UsersPress SP/LP Before performing Express Timer Programming Express Timer ProgrammingStart Time TimeTimer Mode SET VPS/PDC ModeEngage RECORDER’S VPS/PDC RecordingPress ä Timer Check, Cancel And Replace ProgrammesPress Again to check More information. Each Time you press Next programmesAuto Timer Auto SP→LP TimerProg REC Mode Automatic Satellite Programme RecordingBefore performing the following steps Edit From a Camcorder SET Edit ModeMake Connections SET RECORDER’S InputEdit To Or From Another Video Recorder Input ModeSET Recording DECK’S Start Source PlayerAV2 Select Setting RecorderRecorder Player EN System Connections Connection To Satellite TunerSatellite Tuner Unit Back of TVConnector Scart DecoderSet AV2 Select to AV2. pg Select Input Mode Connecting Using a DecoderConnect Decoder SET TunerSpeaker Television Mains outlet Connecting Using a Stereo SystemTuner Set Access Auto CH SETEN Subsi Diary Sett Ings Auto Channel SetView Confirmation Screen Perform Auto Channel SETStoring Channels Manually SU Bsidiary SettingsDelete a Channel When Receiving a Scrambled BroadcastChange Station Channel Position Press %Þ @ #until the item you want to move beginsSwitch Stations Access ManualChannel SET Screen Select NEW StationTV Station And ID List Perform Tuning Access Manual Channel SET ScreenFine-Tuning Channels Already Stored Select Channel to FINE-TUNEExit Video Channel SET Mode Access Video Channel SET ModeVideo Channel Set SET RF Output SystemClock Set Turn the Recorder onSET Date and Time Recorder is preset to receive clock setting Default setting is OFF. Set as desired by pressingSET Just Clock Channel PositionNumber Showview SetupEnter Receiving Channel Position Number Guide Program Number SetTroubleshooting EN Roubleshooting Timer RecordingQuest Ions and Answers EN Ä remain lit on the display panel. Is there Problem?Front View J668EU IndexRear View VCR, TV Prog +/-,TV +/-, TV Muting EN IndexPAL-type colour signal and Ccir Provided accessoriesSpeci Fications EMO Memo Ex. Francais is selected for Belgium Auto Set Up referring to the display panel
Top Page Image Contents