JVC HR-J668EU, HR-J711EU Video Channel Set, Access Video Channel SET Mode, SET RF Output System

Page 43

EN43

Video Channel Set

Video Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable.

IMPORTANT

Perform the following steps only if —

—Video Channel Set has not been done correctly by the Auto Set Up function (☞ pg. 4).

—you set up the recorder's tuner by Preset Download (☞ pg. 6) instead of using the Auto Set Up function.

—interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area.

—you change the connection between your recorder and TV from RF connection to AV connection, or vice versa.

If you have connected the video recorder to your TV via both the RF cable and a 21-pin SCART cable (AV connec- tion), since you do not need the video channel you have to set the video channel to off.

If you have connected the video recorder to your TV via the RF cable only (RF connection), you have to set the correct video channel.

Before performing the following steps, make sure the recorder's power is off and there is no cassette inserted in the recorder.

1

2

3

ACCESS VIDEO CHANNEL SET MODE

Hold down STOP (5/8) on the recorder until the display panel shows the following.

SET RF OUTPUT SYSTEM

The blinking number on the display indicates the RF output system of your country. If you have selected MAGYARORSZAG (36), CESKA REPUBLIKA (42), POLSKA (48) or OTHER EASTERN EUROPE (EE) for the country setting (pg. 4, 8), press %Þ to set to "2". For other countries, set to "1". Then press OK or #.

(1: B/G 2: D/K)

SET VIDEO CHANNEL

With AV Connection

Press TV PROG – until the display panel shows "1OUT– –" (or "2OUT– –").

●Now the video channel is set to off.

With RF Connection

Press TV PROG + or – to set the video recorder to a vacant channel between 22 and 69 which is not occupied by any local station in your area.

(Ex.) If channel 50 is available in your area

Then set your TV to UHF channel 50.

●If the two vertical white bars appear clearly on the screen as shown to the right, go to step 4.

●If the two vertical white bars do not appear clearly, re-set the video recorder to another vacant channel and try again.

NOTES:

●If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

●If you cannot obtain the two vertical white bars clearly with any channel between 22 and 69, consult your JVC dealer.

EXIT VIDEO CHANNEL SET MODE

4 Press OK on the remote control.

With AV Connection:

To view picture signals from the video recorder, set your TV to its AV mode.

With RF Connection:

The channel on which the screen in step 3 appears clearly is your video channel.

To view picture signals from the video recorder, set your TV to the Video Channel.

Page 42 Page 44
Image 43
Page 42 Page 44
Contents HR-J711EU HR-J668EU Do not place the recorder Safety PrecautionsSafety First For ItalyConnect Recorder to Mains Check ContentsBasic Connections Situate RecorderIf you are referring to the on-screen display Auto Set UpEN Initial Settings If you are referring to the front display panelThis Language CodeVia an RF cable only RF connection Your TV to the Video Channel. Refer toENU Preset DownloadJust Clock on If both auto channel set and auto clock set have failedLanguage for the on-screen display Just ClockLanguage Return to Normal Screen Access Main Menu ScreenENABLE/DISABLE ON-SCREEN Display On-Screen DisplaysPower Save Mode NexTView Link TV Auto Power OnLink Functions LI NKCounter and tape remaining time readings will be incorrect Colour System SetMode About Ntsc PlaybackStart Playback Basic PlaybackLoad a Cassette PointPlayback Playback FeaturesActivate HIGH-SPEED Search Return to Automatic Adjust TrackingOverride Automatic Tracking ManuallySelect Picture Control SET Mode Access Mode SET ScreenEN Playback Basic Recording Recording Features To Record Nicam Stereo And Bilingual Programmes Receiving StereoBilingual Programmes To Record Stereo And Bilingual Programmes A2S.T., then press OK or S.T. Picture SystemEN Recording PreparationPlayback RecordingOr press Record on the recorder EN Timer Recording Timer ProgrammingSatellite Tuner Users Timer WarningPress SP/LP Time Express Timer ProgrammingBefore performing Express Timer Programming Start TimeVPS/PDC Recording SET VPS/PDC ModeTimer Mode Engage RECORDER’SNext programmes Check, Cancel And Replace ProgrammesPress ä Timer Press Again to check More information. Each Time you pressAuto Timer Auto SP→LP TimerAutomatic Satellite Programme Recording Prog REC ModeBefore performing the following steps SET RECORDER’S Input SET Edit ModeEdit From a Camcorder Make ConnectionsStart Source Player Input ModeEdit To Or From Another Video Recorder SET Recording DECK’SRecorder AV2 Select SettingRecorder Player Back of TV Connection To Satellite TunerEN System Connections Satellite Tuner UnitDecoder Connector ScartSet AV2 Select to AV2. pg SET Tuner Connecting Using a DecoderSelect Input Mode Connect DecoderSpeaker Television Mains outlet Connecting Using a Stereo SystemAuto Channel Set Access Auto CH SETTuner Set EN Subsi Diary Sett IngsView Confirmation Screen Perform Auto Channel SETStoring Channels Manually SU Bsidiary SettingsPress %Þ @ #until the item you want to move begins When Receiving a Scrambled BroadcastDelete a Channel Change Station Channel PositionSelect NEW Station Access ManualSwitch Stations Channel SET ScreenTV Station And ID List Select Channel to FINE-TUNE Access Manual Channel SET ScreenPerform Tuning Fine-Tuning Channels Already StoredSET RF Output System Access Video Channel SET ModeExit Video Channel SET Mode Video Channel SetTurn the Recorder on Clock SetSET Date and Time Channel Position Default setting is OFF. Set as desired by pressingRecorder is preset to receive clock setting SET Just ClockGuide Program Number Set Showview SetupNumber Enter Receiving Channel Position NumberTroubleshooting EN Roubleshooting Timer RecordingQuest Ions and Answers EN Ä remain lit on the display panel. Is there Problem?Front View J668EU IndexRear View VCR, TV Prog +/-,TV +/-, TV Muting EN IndexProvided accessories PAL-type colour signal and CcirSpeci Fications EMO Memo Ex. Francais is selected for Belgium Auto Set Up referring to the display panel
Top Page Image Contents