JVC HR-S9400EH specifications Basic Recording

Page 23

RECORDING

EN23

Basic

Recording

●Turn on the TV and select the VIDEO channel (or AV mode).

●Set the PAL/MESECAM switch to the appropriate position. ☞ pg. 16

PAUSE

PLAY

TV PROG

				8
•• • • • •• •• • • • ••
• • • •	• • • •			STOP/EJECT
	PAL/MESECAM	RECORD	SP/LP	STOP/EJECT
		RECORD

		2
	1	2	3
NUMBER	4	5	6
NUMBER
	7	8	9
		0	4

TV PROG

SP/LP

PLAY

PAUSE

RECORD

3

1	STOP

TV signals being received by the recorder’s built-in tuner can be recorded onto a video tape. You can “capture” a TV programme using your video recorder.

1		LOAD A CASSETTE
		Insert a cassette with the record safety tab intact.

		● The counter is reset to 0:00:00 and the recorder
		power comes on automatically.

2		CHOOSE A PROGRAMME
		Press TV PROG +/– or the NUMBER keys to select the
		channel you wish to record.

		● The TV PROG dial can also be used to select a channel.

3		SET TAPE SPEED
		Press SP/LP ( ). Check the SP/LP indicator on the
		recorder display panel to confirm the selected tape
		speed.
4		START RECORDING
		Press and hold RECORD and PLAY on the remote
	control, or press RECORD on the recorder.
		PAUSE/RESUME
5		RECORDING
5		Press PAUSE. Press PLAY to resume recording.
6		STOP RECORDING
		Press STOP on the remote control or STOP/EJECT on
		the recorder. Then press STOP/EJECT to remove the
		cassette.

Accidental erasure prevention

●To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab

Image 23

Contents HR-S9400E/EH Do not place the recorder Safety PrecautionsFor Italy For Customers in Australia and New Zealand Installing Your NEW Record ERBasic Connections INS Talling YO UR NEW R Ecorder Video ConnectionConnect Recorder to TV Connect Recorder to MainsBack of TV Rear viewNitial Sett Ings Auto Set UpTurn on the Recorder Select CountryLanguage Code for the HR-S9400E Perform Auto SET UPSelect Language If you are referring to the on-screen displayJust Clock Initial SettingsIf both auto channel set and auto clock set have failed Language for the on-screen displayLanguage Video Channel Set Access Video Channel SET ModeExit Video Channel SET Mode EN Initial SettingsWith AV Or S-VIDEO Connection Guide Program Number Set SetupMake List of Stored Station Names Channel Positions Close Menu When Using a Satellite TunerEnter Showview Number Confirm Channel Position NumberPlayback BasicActivate SLOW-MOTION Playback Playback FeaturesPause During Playback Activate FRAME-BY-FRAME PlaybackReturn to Automatic Adjust TrackingOverride Automatic Tracking ManuallyEnd Tape Position Indicator Instant ReViewActivate Instant Review Index SearchDuring Playback Activate SpatializerSpatializer Soundtrack SelectionStop Scene Finder SET A/B Code SwitchRE-SUPPLY Power Activate Scene FinderVariable-Speed Search/ Reverse Play Audio signal during TimeScanTime Scan Indicator TimeScanSpeed SP Speed LP Audio output TimeScanReturn to Normal Screen Access Main Menu ScreenAccess Mode SET Screen Select ModeBasic Recording SET Counter Display Reset CounterSelect Channel to WatchTo Record Stereo And Bilin- gual Programmes A2 Resume Recording Engage RECORD-PAUSE ModeLevel Locate Start PointReturn to Normal Access Main MenuENABLE/DISABLE ON-SCREEN Display On-Screen DisplaysMing Screen TimerEN Timer Recording When Using The Illumi-Guide FeaturePressing Prog Check To timer-record a satellite broadcast using ShowviewSatellite Tuner Users Stop +/- , Date +/- , TV Prog + Regular TimerEN Timer RECORDINGcont Programming+/- , Date +/- , TV Prog +/- and Menu Buttons remain lit Start +/-, Stop +/-, Date +Press TV Prog + PDC/VPSRevise Programme Access ProgrammeAuto Timer Check And Cancel ProgrammesEngage Auto SP/LP TimerAuto SP/LP Timer Timer WarningEditing Editing Mode SettingPreparation For EditingWhen using front panel input connectors To Select The External Input ModeAV2 Select Setting When using rear panel input connectorsEdit To Or From Another Video Recorder Recorder Player PlayerYour recorder Start Recorder SET RECORDER’S Input ModeEdit From a Camcorder Start CamcorderEND Audio Dubbing SET Input ModeEngage Audio Dubbing Start DubbingLocate END Point Reset the CounterInsert Editing END Insert Editing Engage Insert EditingStart Editing Load Source Cassette Access R.A. Edit ScreenRandom As- semble Editing Prepare for EditingEND R.A. Edit Locate EDIT-IN PointLocate EDIT-OUT Point Start R.A. EditInfo Rmation on J Terminal Access Jlip ID NO. SET ScreenTerminal JLIPJoint Level Interface Protocol Connector SET Jlip ID NumberSET Tuner Connecting Using a DecoderSelect Input Mode Connect DecoderEN System Connections Connecting Using a Stereo SystemSpeaker TRY Operating TV TV Multi Brand Remote ControlControl Your TV Using Additional Buttons SET TV Brand CodeSatellite Tuner Brand Code Satellite Tuner MultiSET Satellite Tuner Brand Code TRY Operating Satellite TunerPress Push JOG to Access Country SETTuner SET Auto Channel SetAppears, Press Push JOG Move the highlight barPointer to Language of your To initiate Auto Channel SetSelect NEW Position Select ItemDelete Channel Close ConfirmationSelect NEW Station Switch StationsAccess Manual CH. SET Perform TuningStation Name TV Station And ID ListScreen appears Clock SETPreparation Move the highlight bar pointer to Clock SET byStart Clock Operation SET Clock AutomaticallySET Date and Time SET Just ClockConnection, set the TV to its AV Troubleshooting E NPanel with Auto Timer set to OFF Indicator off Set the TV receiver to the VideoCamcorder recording is not Camcorder has not been Timer againOubleshooting Questions and Answer S E N Ä remain lit on the display panel. Is there a problem?Index Open the lid to access covered connectors and buttonsRear View EN Index Installing BatteriesHow To Use Provided in Australia and New Zealand only SpecificationsMaximum recording time Language Code for the HR-S9400EH HR-S9400E/EHInternational Telephone Country Code Language Code for the HR-S9400E