JVC HR-S6855EK, HR-S6856EK, HR-S6857EK manual When Programmes Overlap Each Other

30

basic features

When Programmes Overlap Each Other

If PROGRAM OVERLAPPED appears, you have another programme overlapping the programme you have just made.

confirm overlapping programmes The Program Check screen appears and conflicting programmes will start blinking.

Example: Programme 1 (you have just made) and Programme 4 overlap each other.

select programme to modify Press the A and Bbuttons, then press O (or E). You can only select one of the overlapping programmes.

		START	STOP	CH	DATE
	1	8:00	10:00	3	24.12
	2	10:00	10:45	2	25.12
3		11:30	13:00	1	25.12
4		9:00	10:00	92	DAILY
5
6
7
8
	[1] a k
	[PROG]: EXIT

note If you do not mind this overlap, press PROG to finish the timer programme setting. The programme with the lower programme number will be recorded and the other one will not be recorded correctly. Without doing anything for about 1 minutes, the VCR will finish the timer programming.

cancel a programme Press xto cancel a programme when the Program screen you do not want is shown.

change a programme Use the START +/–,STOP +/–,DATE +/–,PR +/–, /andPDC buttons as necessary, then press O.

PROGRAM COMPLETED appears on the screen for about 5 seconds, then normal screen appears.

	– P1 –
START	STOP
8:00		10:00
SP	VPS/PDC OFF
DATE	TV PROG

24.123 ITV

[x]: DELETE	[+/–] ak
[PROG]: EXIT

note If the overlap is not yet solved or another overlap occurs with the timer programme setting made last after making correction on a programme, the conflicting programmes will be shown on the Program Check screen again. Repeat the above steps again until the overlap is solved.