JVC HR-S6855EK, HR-S6856EK, HR-S6857EK manual Perform Auto Setup pg

Page 9

scart and rf

SCART is a recommended option because its use improves the quality of the picture.

If connecting to a stereo TV you will need a SCART cable.

There are several types of SCART cables, fully- wired and others.

If you use a SCART cable, you must also connect the RF cable.

welcome to jvc 9

GETTING EVERYTHING READY (continued)

connect cables Connect the cables as indicated in the diagram (below), using the TV Aerial Cable, the RF Cable and the 21-pin SCART Cable (not provided).

RF Cable (provided)

TV Aerial Cable (not provided)

21-pin SCART Cable (not provided)

notes

The AV1 (L-1) IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). If your TV’s 21-pin AV input connector (SCART) is compatible with the Y/C signal, set L-1 OUTPUT to S-VIDEO after the connection and the initial settings are completed (☞ pg. 50). You can obtain high- quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

Set your TV to the VIDEO (or AV), Y/C, or RGB mode according to the type of your TV’s SCART connector.

For switching the TV’s mode, refer to the instruction manual of your television.

Mains Power

Cord

Back of VCR

Mains Outlet

You are now ready to start the Three-Step Quick Start which begins on the next page.

You have two ways for initial setup of your new VCR depending upon the connection method and your TV.

If you have connected only the RF cable, perform Auto Setup (☞ pg. 10).

If you have connected both the RF cable and the fully- wired 21-pin SCART cable, and if your TV does not offer T-V Link, etc.*,

perform Auto Setup (☞ pg. 10).

If you have connected both the RF cable and the fully-wired 21-pin SCART cable, and if your TV offers T-V Link, etc.*, perform Preset Download (☞ pg. 11).

*Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link, DATA LOGIC or NexTView Link via fully-wired 21-pin SCART cable. The degree of compatibility and available functions may differ by system.

Image 9

Contents HR-S6855EK HR-S6856EK HR-S6857EK If in doubt consult a competent electrician Safety PrecautionsMoisture Condensation On The Safe Use Of Equipment Some Do’s And Don’tsContents YQioptu Front Panel Diagram KeyGetting Everything Ready Welcome to JVCPerform Auto Setup pg Three-Step Quick Start Auto SetupThree step quick start Preset DownloadFinish Off Check the ResultsBasic Features Load a Video Cassette PlaybackPlay Stop & EjectRewind and Fast Forward Video Heads CleaningAdvanced JOG Dial Playback FeaturesPause During Playback Single Frame MovementVariable Speed Search Slow MotionHigh Speed Search Choose a Programme RecordingSet the Tape Speed Start RecordingCheck Elapsed Recording Time and Reset It Display Tape Remaining TimeChange Display Information Recording Resume Function Instant Timer RecordingEnter the PlusCode Number Get to the Video Plus + ScreenPressing Cchanges the display to the programme Engage Timer Mode Edit Programme TitleReturn to Normal Screen Express Timer Programming Get to the Programme Screen/DisplayEnter Programme Details Ente Return to Normal Screen 24H Express Timer Programming Press c, then press oto disengage the timer mode Check, Cancel & Change ProgrammesWhen Programmes Overlap Each Other Advanced Features Picture Quality Manual TrackingVideo Stabilizer Picture Control Super VHS ET S-VHS ET Tape TypeTo record in S-VHS Super VHS S-VHS, S-VHS ET and VHSRecording and Playback Using B.E.S.T Avoiding B.E.S.T. Time DelayTurning B.E.S.T. on or OFF Sound Modes Nicam Stereo and Bilingual BroadcastsSoundtrack Selection Skip Search Finding Specific ScenesIndex Search Instant ReViewProgramme Navigation When inserting a cassette with the record safety tab intactNavigation Screen Navigation PlaybackEntering Character Delete Tape Data Link Functions TV Auto Power OnNexTView Link VCR Auto StandbyDirect Rec Installing Satellite Controller Satellite Receiver Control SettingsCode Setting satellite receiver’s brandCheck Result of Test Auto Record from Satellite Receiver Auto Satellite Programme RecordingAdvanced features Editing OUTPUT/INPUT SettingFor L-2 Select SELECT/INPUT SettingEditing Using Another VCR Your VCR as the Player Editing from a Camcorder On-Screen Display O.S.D Other FunctionsAuto SP aLP Timer Power Save ModeAuto Timer Repeat PlaybackNext Function Memory Connection to a Stereo System Exit Video Channel Set Mode Access Video Channel ModeVideo Channel Set Set Video ChannelTuner Set Auto Channel SetupManual Channel Setup Delete a Channel Change Station NameChange Station Preset Position TV Station ID Guide Fine-Tuning Stored ChannelsBBC1 BBC2 ITV CH4 CH5 TV Station Channel Number GuideClock Set Setting the ClockGuide Program Numbers Manually Setting Guide Program NumbersPlayback Questions and AnswersSymptom Possible Cause TroubleshootingRecording Other Problems List of Terms Memo Memo Memo HR-S6855/6856/6857EK