JVC HR-S6855EK Programme Navigation, When inserting a cassette with the record safety tab intact

Page 39

advanced features

39

Programme Navigation

When you record a TV programme with this VCR, the VCR automatically stores in its memory the recording date, start time and station name. You can store these information for up to

8programmes on one cassette. At maximum, information for 10 tapes can be stored. You can also enter the programme title when performing ‘VIDEO Plus+ Timer Programming’ (☞ pg. 22) or ‘Express Timer Programming’ (☞ pg. 25). It is possible to store these infor- mation only when ‘PROG. NAVIGATION’ is set to ‘ON’ (default setting) (☞ pg. 40).

When inserting a cassette with the record safety tab intact ...

CHECKING TAPE DATA

REMAIN [ 3]

The VCR checks the tape information for the Programme Navigation. If the VCR can store the information for 3 or less tapes, ‘REMAIN [ _]’ also appears on the TV screen.

If the VCR has already stored the information for 10 tapes, ‘MEMORY

FULL’ appears. If youCHECKING TAPE DATA

perform new recording, the oldest tape informa- tion will be deleted from the VCR’s memory.

MEMORY FULL

NO TAPE DATA DETECTED

If the VCR cannot detect the tape information, ‘NO TAPE DATA DETECTED’ appears. You cannot use Programme Navigation.

NOTE:

If you press any button while ‘CHECKING TAPE DATA’ appears on the TV screen, the operation is canceled.

When inserting a cassette whose record safety tab has been removed ...

Playback begins automatically. You can use Navigation Playback (☞ pg. 40), but you cannot edit programme title or delete tape data (☞ pg. 41, 42).

NOTES:

•Programme Navigation is possible with the cassettes recorded with this VCR only.

•Before recording, make sure the VCR’s clock is set correctly.

•To record the programme information in this VCR’s memory, you must continue to record each programme for over the minimum recording time; 8 minutes for the SP mode, 15 minutes for the LP mode or 23 minutes for the EP mode.

•Programme Navigation may not work properly depending on the tape being used.

•The programme information is stored in this VCR’s memory. If the memory in this VCR should ever be damaged and the programme information lost, it is impossible to restore that information.

Image 39

Contents HR-S6855EK HR-S6856EK HR-S6857EK If in doubt consult a competent electrician Safety PrecautionsMoisture Condensation On The Safe Use Of Equipment Some Do’s And Don’tsContents YQioptu Front Panel Diagram KeyGetting Everything Ready Welcome to JVCPerform Auto Setup pg Three-Step Quick Start Auto SetupThree step quick start Preset DownloadFinish Off Check the ResultsBasic Features Stop & Eject PlaybackLoad a Video Cassette PlayRewind and Fast Forward Video Heads CleaningSingle Frame Movement Playback FeaturesAdvanced JOG Dial Pause During PlaybackVariable Speed Search Slow MotionHigh Speed Search Start Recording RecordingChoose a Programme Set the Tape SpeedCheck Elapsed Recording Time and Reset It Display Tape Remaining TimeChange Display Information Recording Resume Function Instant Timer RecordingEnter the PlusCode Number Get to the Video Plus + ScreenPressing Cchanges the display to the programme Engage Timer Mode Edit Programme TitleReturn to Normal Screen Express Timer Programming Get to the Programme Screen/DisplayEnter Programme Details Ente Return to Normal Screen 24H Express Timer Programming Press c, then press oto disengage the timer mode Check, Cancel & Change ProgrammesWhen Programmes Overlap Each Other Advanced Features Picture Quality Manual TrackingVideo Stabilizer Picture Control Super VHS ET S-VHS ET Tape TypeTo record in S-VHS Super VHS S-VHS, S-VHS ET and VHSRecording and Playback Using B.E.S.T Avoiding B.E.S.T. Time DelayTurning B.E.S.T. on or OFF Sound Modes Nicam Stereo and Bilingual BroadcastsSoundtrack Selection Instant ReView Finding Specific ScenesSkip Search Index SearchProgramme Navigation When inserting a cassette with the record safety tab intactNavigation Screen Navigation PlaybackEntering Character Delete Tape Data VCR Auto Standby TV Auto Power OnLink Functions NexTView LinkDirect Rec Installing Satellite Controller Satellite Receiver Control SettingsCode Setting satellite receiver’s brandCheck Result of Test Auto Record from Satellite Receiver Auto Satellite Programme RecordingAdvanced features Editing OUTPUT/INPUT SettingFor L-2 Select SELECT/INPUT SettingEditing Using Another VCR Your VCR as the Player Editing from a Camcorder On-Screen Display O.S.D Other FunctionsAuto SP aLP Timer Power Save ModeAuto Timer Repeat PlaybackNext Function Memory Connection to a Stereo System Set Video Channel Access Video Channel ModeExit Video Channel Set Mode Video Channel SetTuner Set Auto Channel SetupManual Channel Setup Delete a Channel Change Station NameChange Station Preset Position TV Station ID Guide Fine-Tuning Stored ChannelsBBC1 BBC2 ITV CH4 CH5 TV Station Channel Number GuideClock Set Setting the ClockGuide Program Numbers Manually Setting Guide Program NumbersPlayback Questions and AnswersSymptom Possible Cause TroubleshootingRecording Other Problems List of Terms Memo Memo Memo HR-S6855/6856/6857EK