JVC HR-S6856EK, HR-S6855EK, HR-S6857EK manual Recording

Page 70

70

subsidiary information

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

RECORDING

1.Recording cannot be started.

2.TV broadcasts cannot be recorded.

3.Tape-to-tape editing is not possible.

4.Camcorder recording is not possible.

•There is no cassette loaded, or the cassette loaded has had its record safety tab removed.

•L-1, L-2, F-1, S-1 or SAT has been selected as the input mode.

•The source (another VCR, camcorder) has not been properly connected.

•All necessary power switches have not been turned on.

•The input mode is not correct.

•The camcorder has not been properly connected.

•The input mode is not correct.

Insert a cassette, or using adhesive tape, cover the hole where the tab was removed.

Set to the desired preset.

Confirm that the source is prop- erly connected.

Confirm that all units’ power switches are turned on.

Set the input mode to L-1, L-2, F-1 or S-1.

Confirm that the camcorder is properly connected.

Set the input mode to L-1, L-2, F-1 or S-1.

TIMER RECORDING

1.Timer recording won’t work.

2.Timer programming is not possible.

•The clock and/or the timer have been set incorrectly.

•The timer is not engaged.

•Timer recording is in progress.

Re-perform the clock and/or timer settings.

Press cand confirm that cis displayed on the display panel.

Timer programming can’t be performed while a timer recording is in progress. Wait until it finishes.

3.cand ton the display panel won’t stop blinking.

•The timer is engaged but there’s no cassette loaded.

•The loaded cassette has had its Record Safety tab removed.

Load a cassette with the Record Safety tab intact, or cover the hole using adhesive tape.

Remove the cassette and cover the hole with adhesive tape, or insert a cassette with the Record Safety tab intact.

4.cblinks for 10 seconds and the Timer mode is disengaged.

•chas been pressed when there are no programs in memory, or the timer record information has been pro- grammed incorrectly.

Check the programmed data and re-programme as necessary, then press cagain.

5.The power shuts off and cand twon’t stop blinking.

•The end of the tape was reached during timer recording.

The programme may not have been recorded in its entirety. Next time make sure you have enough time on the tape to record the entire programme.

6.The VIDEO Plus+ system does not timer record properly.

•The VCR’s preset positions have been set incorrectly.

Refer to Guide Program Numbers (☞ pg. 67) and re-perform the procedure.

Page 69 Page 71
Image 70
Page 69 Page 71
Contents HR-S6855EK HR-S6856EK HR-S6857EK Safety Precautions If in doubt consult a competent electricianMoisture Condensation Some Do’s And Don’ts On The Safe Use Of EquipmentContents YQioptu Diagram Key Front PanelWelcome to JVC Getting Everything ReadyPerform Auto Setup pg Auto Setup Three-Step Quick StartPreset Download Three step quick startCheck the Results Finish OffBasic Features Play PlaybackLoad a Video Cassette Stop & EjectVideo Heads Cleaning Rewind and Fast ForwardPause During Playback Playback FeaturesAdvanced JOG Dial Single Frame MovementSlow Motion Variable Speed SearchHigh Speed Search Set the Tape Speed RecordingChoose a Programme Start RecordingDisplay Tape Remaining Time Check Elapsed Recording Time and Reset ItChange Display Information Instant Timer Recording Recording Resume FunctionGet to the Video Plus + Screen Enter the PlusCode NumberPressing Cchanges the display to the programme Edit Programme Title Engage Timer ModeReturn to Normal Screen Get to the Programme Screen/Display Express Timer ProgrammingEnter Programme Details Ente Return to Normal Screen 24H Express Timer Programming Check, Cancel & Change Programmes Press c, then press oto disengage the timer modeWhen Programmes Overlap Each Other Advanced Features Manual Tracking Picture QualityVideo Stabilizer Picture Control Tape Type Super VHS ET S-VHS ETSuper VHS S-VHS, S-VHS ET and VHS To record in S-VHSAvoiding B.E.S.T. Time Delay Recording and Playback Using B.E.S.TTurning B.E.S.T. on or OFF Nicam Stereo and Bilingual Broadcasts Sound ModesSoundtrack Selection Index Search Finding Specific ScenesSkip Search Instant ReViewWhen inserting a cassette with the record safety tab intact Programme NavigationNavigation Playback Navigation ScreenEntering Character Delete Tape Data NexTView Link TV Auto Power OnLink Functions VCR Auto StandbyDirect Rec Satellite Receiver Control Settings Installing Satellite ControllerSetting satellite receiver’s brand CodeCheck Result of Test Auto Satellite Programme Recording Auto Record from Satellite ReceiverAdvanced features OUTPUT/INPUT Setting EditingSELECT/INPUT Setting For L-2 SelectEditing Using Another VCR Your VCR as the Player Editing from a Camcorder Other Functions On-Screen Display O.S.DPower Save Mode Auto SP aLP TimerRepeat Playback Auto TimerNext Function Memory Connection to a Stereo System Video Channel Set Access Video Channel ModeExit Video Channel Set Mode Set Video ChannelAuto Channel Setup Tuner SetManual Channel Setup Change Station Name Delete a ChannelChange Station Preset Position Fine-Tuning Stored Channels TV Station ID GuideTV Station Channel Number Guide BBC1 BBC2 ITV CH4 CH5Setting the Clock Clock SetManually Setting Guide Program Numbers Guide Program NumbersQuestions and Answers PlaybackTroubleshooting Symptom Possible CauseRecording Other Problems List of Terms Memo Memo Memo HR-S6855/6856/6857EK
Top Page Image Contents