JVC HR-S6856EK, HR-S6855EK, HR-S6857EK manual Manual Channel Setup

[0]: CURSOR g

k: OK

[MENU]: EXIT

input channel number Press

the Ebutton and you will see the channel number space flash-

ing. Use the number keys to enter the Channel Number that you want to store.

input channel id Press the Ebutton to move to the Channel ID space and use the A and Bbuttons to select the required ID from the stored list.

fine tuning Press the Ebutton to move to the Fine Tuning ‘+/–’ and use the Aand Bbuttons to fine-tune the channel. A ‘+’ or a ‘–’ symbol will appear during this process.

[0–9]: SELECT

advanced features

61

Manual Channel Setup

get to the confirmation screen Press m. Move the highlight bar to MANUAL CH SET using the Aand Bbuttons and press O(or E).

MAIN MENU

PROGRAMME NAVIGATION MODE SET

AUTO CH SET

FMANUAL CH SET OUTPUT/INPUT SET INITIAL SET

[1] a k [MENU]: EXIT

select position Use the

Mbutton on the Remote Control to move the highlight bar to a vacant position then press O.

In this example, we have chosen position 6.

PR	CH	ID	PR	CH	ID
01	26	BBC1	08		- - - -
02	33	BBC2	09		- - - -
03	23	ITV	10		- - - -
04	30	CH4	11		- - - -
05	37	CH5	12		- - - -
06		- - - -	13		- - - -
07		- - - -	14		- - - -

[10]

ak: EDIT a[x]: DELETE [MENU]: EXIT

select band When the MANUAL CH SET screen appears, press the Aand Bbuttons to change the band between CH (regular) and CC (cable).

PR	CH	ID	FINE	DECODER
06	CH21	- - - -	+/–	OFF

select decoder setting When receiving a scrambled broadcast with a decoder connected to the AV2 (L-2) IN/DECODER connector, set L-2 SELECT to DECODER (☞ pg. 51) and set DECODER setting to ON. When L-2 SELECT is set to A/V or SAT, the DECODER setting cannot be changed.

save new channel details Press Oto save the details you have just entered. The Confir- mation Screen will appear again. Repeat the above procedure from Select Position onwards as many times as required.

close confirmation screen Press m.