advanced features
Editing
L-1 OUTPUT/INPUT Setting
The AV1 (L-1) IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set L-1 OUTPUT and L-1 INPUT to the appro- priate mode depending on the type of unit connected to the rear panel AV1 (L-1) IN/OUT connector of this VCR.
get to the output/input set screen Press m. Move the highlight bar to OUTPUT/INPUT SET using the Aand Bbuttons and press O(or E).
select mode Move the highlight bar to L-1
OUTPUT or L-1 INPUT using the Aand B | | | | OUTPUT/INPUT SET |
buttons. Press O(or E) to select the | | | | | | |
| | FL-1 | OUTPUT | VIDEO | |
desired mode: | | | L-1 | INPUT | VIDEO | |
| | L-2 | SELECT | A/V |
| | |
FOR L-1 OUTPUT | | | L-2 | INPUT | VIDEO |
| | | | | |
• VIDEO : If a connected device’s input is | | | | | |
| | [1] a k | | |
| | [MENU]: EXIT | | |
compatible only with regular | | | | |
| | | | | |
video signals, set to VIDEO. | | | | | | |
•S-VIDEO : If a connected device’s input is compatible with Y/C signals, set to
S-VIDEO. This setting will let you take advantage of higher-quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)
FOR L-1 INPUT
•VIDEO : If a connected device’s output is compatible only with regular video signals, set to VIDEO.
•S-VIDEO : If a connected device’s output is compatible with Y/C signals, set to S-VIDEO. This setting will let you take advantage of higher-quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)
return to normal screen Press m.
NOTES:
•If L-1 OUTPUT is set to S-VIDEO, it is impossible to set L-1 INPUT to S-VIDEO.
•If L-2 SELECT is set to DECODER, it is impossible to set L-1 INPUT to S-VIDEO.