JVC HR-S8850EU specifications Language for the on-screen display, Just Clock

Page 15

EN 15

Results of Auto Set Up/Preset Download appear on the front display panel

If both Auto Channel Set and Auto Clock Set have been performed successfully, the correct current time is displayed.

Turn on the TV and select its video channel or AV mode, then make sure that all necessary stations have been stored in the recorder’s memory by using the PR button(s).

●If station names (ID –  pg. 69) have also been stored in the recorder’s memory, the station name will be displayed at the top left corner of the TV screen for about 5 seconds when the recorder is tuned to a different station.

●If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change station names, see pages 66 – 69.

If Auto Channel Set has succeeded but Auto Clock Set has not, “1” (channel position) is displayed.

ATurn on the TV and select its video channel or AV mode, then make sure that all necessary stations have been stored in the recorder’s memory by using the PR button(s).

●If station names (ID –  pg. 69) have also been stored in the recorder’s memory, the station name will be displayed at the top left corner of the TV screen for about 5 seconds when the recorder is tuned to a different station.

●If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change station names, see pages 66 – 69.

BPerform “Clock Set” on page 70.

If both Auto Channel Set and Auto Clock Set have failed, “– –:– –” is displayed.

Make sure the cables are connected properly and turn off the recorder’s power once, then turn the recorder’s power back on again.

The Country Set display appears on the front display panel and/or on the TV screen; perform “Auto Set Up” on page 12 or “Preset Download” on page 14 again.

IMPORTANT

●To check if the Guide Program numbers have been set correctly, perform the SHOWVIEW Timer Programming ( pg. 30).

●In certain reception conditions, station names may not be stored correctly, and auto Guide Program Number Set may not work properly. If the Guide Program numbers are not set properly when you timer-record a TV programme using the SHOWVIEW

system, the recorder will record a TV programme of a different station. When programming the timer using the SHOWVIEW system, be sure to check the desired channel is selected correctly ( pg. 30, “SHOWVIEW® Timer Programming”).

●Your video recorder memorizes all detected stations even if reception of some of them is poor. You can delete those stations with an unacceptable picture ( pg. 67, “Delete A Channel”).

INFORMATION

Language for the on-screen display

Auto Set Up also selects the language automatically for the on-screen display depending on the Country setting you have made in step 2 on page 12 (unless you have selected BELGIUM or SUISSE), as shown below.

SUOMI

] SUOMI

DANMARK

]

DANSK

NEDERLAND

]

NEDERLANDS

PORTUGAL

] ENGLISH

ÖSTERREICH

]

DEUTSCH

GREECE

]

ENGLISH

DEUTSCHLAND

] DEUTSCH

CESKÁ REPUBLIKA ]

CEcTINA

OTHER WESTERN EUROPE]

ENGLISH

POLSKA

] POLSKI

ITALIA

]

ITALIANO

OTHER EASTERN EUROPE ] ENGLISH

NORGE

] NORSK

MAGYARORSZÁG ]

MAGYAR

 

 

 

SVERIGE

] SVENSKA

ESPAÑA

]

CASTELLANO

 

 

 

If you want to change the language setting manually, see “Language” on page 16.

Just Clock

Your recorder is equipped with the Just Clock function which provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal. If you want to take advantage of this function, simply set it to “ON”

( pg. 70, “Just Clock”).

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Connector coverRear View Front Display Panel ON-SCREEN Display Remote Control Remote Control LCD How To UseConnect the recorder to TV Check the contents10 EN Situate the recorderVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsSelect your country Auto Set Up12 EN Turn on the recorderPress rt to select Auto and press OK or e Perform Auto Set UpSelect the language Press rt to select your language codePress rt to select CH - and press OK or e Perform Preset Download14 EN Set the video channelJust Clock Language for the on-screen display16 EN Access the Main Menu screenAccess the Country Set screen LanguageMake connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller18 EN Setting satellite receivers brand and channelTV Auto Power On NexTView LinkVCR Auto Standby Direct Rec 20 EN Basic PlaybackActivate frame-by-frame playback Slow MotionHigh-Speed Turbo Search Pause during playbackSkip Search 22 ENVariable Speed Search Index SearchSoundtrack Selection Next Function MemoryRepeat Playback Manual Tracking24 EN Tape Remaining Time Instant Timer Recording ITRLocate the start point Engage the Record-Pause mode26 EN RetakeEngage the S-VHS ET mode Received Receiving Stereo and Bilingual ProgrammesRecording Playback30 EN Access the Showview displayAccess the Showview screen Access the Showview Program screenEnter the programme title Set the VPS/PDC modeAccess the Title Edit screen Engage the recorder’s timer mode32 EN Express Timer ProgrammingPress PR+ To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel positionSet the programme start/stop time and channel Enter the programme modeBefore performing the 24 Hour Express Timer Programming 34 ENAccess the Programme Check screen/display Cancel or change a programmeDisengage the timer mode Return to the timer modeOverlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modifyBefore performing the following steps Select the L-2 Select modeRecording mode Programme Recording38 EN NavigationSelect a programme Navigation PlaybackProgramme Navigation Screen Load a recorded cassette40 EN Edit Programme TitleSelect the programme Example Enter JVC News Entering CharacterDelete Tape Data Delete the tape data42 EN Remote A/B Code SwitchingSet the remote control code Check the remote control code for the recorderTV Multi-Brand Remote Control Set the TV brand codeOperate the TV Operate the satellite receiver Satellite Receiver Multi-Brand Remote Control44 EN Set the satellite receiver brand codeStart the camcorder Set the recorder’s input modeSet the edit mode Edit From a Camcorder46 EN Access the Output/Input Set screenDecoder connector Select and L-2 Input Setting48 EN Another Video RecorderPlayer 50 EN Audio DubbingPress AUX number key 0 and/or PR to select F-1 or S-1 Engage the Audio Dubbing modeStart dubbing End Audio Dubbing52 EN Insert EditingStart Editing Engage the Insert Editing modeAV Insert Editing Locate the end pointSimple Connections Connecting To a Satellite ReceiverPerfect Connections Set the tuner Select the input mode56 EN Connect the decoderMake connections Connecting/Using a Stereo SystemSelect the mode setting Mode SetAccess the Mode Set screen Select the modeSystem to on or OFF  pg When viewing overplayedWhen this function is set to ON, the timer is automatically Disengaged when the recorder is powered back onFunction  pg , set PROG. Navigation to OFF On the remote control, or press 7 on the recorderEntire programme while timer-recording in SP mode 60 ENWhen this function is set to ON, you can automatically When this function is set to ON, the Digital 3R pictureWhen this function is set to ON, you can reduce Power consumption while the recorder is turned offAbout Ntsc Playback 62 ENEnter the Guide Program number Showview System SetupGuide Program Number Set Guide Program NumberAuto Channel Set Access the Auto Channel Set screenTuner Set 64 ENPerform Auto Channel Set View the Confirmation screenPress OK twice Manual Channel Set 66 ENDelete a Channel When Receiving a Scrambled Broadcast68 EN Set Stations aSet Stations B Station Name TV Station And ID ListAccess the Clock Set screen Clock Set70 EN Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data72 EN Access the Video Channel Set modeExit the Video Channel Set mode Video Channel SetPower Recording 74 ENOther Problems Playback 76 ENLines VHS Signal-to-noise ratio 45 dB Horizontal resolutionMemory backup time Approx min Scan systemListe of Terms 78 ENMemo Country code International telephone Language code

HR-S8850EU specifications

The JVC HR-S8850EU is one of the standout VHS videocassette recorders from the late 1990s, designed to cater to the needs of both casual viewers and avid collectors of video content. This model is still recognized today for its robust features, advanced technologies, and overall reliability.

At the core of the HR-S8850EU's appeal is its excellent video quality. The unit employs JVC's Super VHS technology, which offers significantly improved resolution over standard VHS recordings. This allows users to capture and playback their favorite shows and home videos with remarkable clarity. It also features S-VHS ET, enabling the recording of standard VHS tapes with enhanced quality, making it a versatile choice for all types of video content.

One of the hallmark features of the HR-S8850EU is its dual-head design, which improves playback performance and fidelity. This model also incorporates various video and audio enhancements, including Digital Noise Reduction, which helps in minimizing the noise that can detract from the viewing experience. The use of professional-grade components ensures durability and longevity, making it a reliable choice for long-term use.

Another significant characteristic of the HR-S8850EU is its capability for timer recording. Users can easily set up the VCR to record shows at specified times, and with its built-in clock and programmable features, it seamlessly integrates into a home entertainment system. The presence of a 4-head system provides flexibility in viewing and recording, allowing users to access a variety of recording modes.

The HR-S8850EU also includes features such as automatic tracking, which optimizes playback for various tape conditions, and an intuitive On-Screen Display (OSD) for easy navigation through settings and functions. Additionally, the unit is equipped with multiple input and output terminals, including S-Video output, composite video, and audio connections, offering compatibility with a range of devices and ensuring that it can adapt to various home theater setups.

In summary, the JVC HR-S8850EU is a sophisticated yet user-friendly VCR that combines high-quality video recording capabilities with advanced features and technologies. Its blend of reliability, superior playback quality, and ease of use has made it a cherished model for enthusiasts and casual users alike, solidifying its status in the history of home entertainment technology.
Top Page Image Contents