JVC HR-S8850EU specifications Another Video Recorder, 48 EN

48 EN EDITING (cont.)

Edit To Or From

Another Video

Recorder

Advantages of S-VHS video recorders

You can edit from VHS to S-VHS, S-VHS to VHS, or, from S-VHS to S-VHS.

●From VHS to S-VHS: Record VHS playback signals in the S-VHS mode. Although the picture quality is inherently limited by that of the original, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●From S-VHS to VHS: Because the picture quality of the source material is very high, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●From S-VHS to S-VHS: All signals will be transferred with minimum degradation.

You can use your recorder as the source player or as the recording deck.

A Make connections.

Connect the player’s 21-pin SCART connector to the recorder’s 21-pin SCART connector as illustrated on page 49.

AWhen using your recorder as the source player ...

... connect its AV1 (L-1) IN/OUT connector to the recording deck.

BWhen using your recorder as the recording deck ...

... connect its AV1 (L-1) IN/OUT or AV2 (L-2) IN/

DECODER connector to the source player.

●If another recorder is compatible with the Y/C signal ...

... when using your recorder as the source player, set “L-1 OUTPUT” to “S-VIDEO” ( pg. 46).

... when using your recorder as the recording deck, set “L-2 INPUT” to “S-VIDEO” ( pg. 47).

B Set the input mode of recording deck.

With this video recorder, press AUX (number key “0”) and/or PR to select “L-1” for the AV1 (L-1) IN/OUT connector, or “L-2” for the AV2 (L-2) IN/DECODER connector, depending on the connector being used.

●When using another recorder as the recording deck, refer to its instruction manual.

●When using the AV2 (L-2) IN/DECODER connector, set “L-2 SELECT” to “A/V” ( pg. 47).

C Set the edit mode.

See “PICTURE CONTROL” on page 59.

D Start the source player.

Engage the Play mode of the source player.

E Start the recording deck.

Engage the Record mode of the recording deck.