JVC HR-S8850EU specifications TV Multi-Brand Remote Control, Set the TV brand code, Operate the TV

Page 43

EN 43

Control Your TV Using Additional Buttons

Use the number keys, and the p button, & button or # button to select the TV’s channel.

●With televisions under Code 01, 02, 07, 10, 11, 14, 20, 23, 24, 25, 27, 33 or 35, the p button corresponds to the

1-digit/2-digit entry switching button (often labelled – /– –) of your TV’s remote control.

●With televisions under Code 01, 28, 29 or 34, the & button corresponds to the 10 + button, and the # button corresponds to the 20 + button of your TV’s remote control.

NOTE:

The way these buttons are used is determined by your TV. Use these buttons as instructed for your TV’s remote control.

TV Multi-Brand Remote Control

Your remote control can operate the basic functions of your TV set. In addition to JVC TVs, other manufacturer’s TVs can also be controlled.

Before performing the following steps:

Turn off the TV using its remote control.

A Set the TV brand code.

Refer to the chart below. Press and hold TV on the recorder’s remote control for over 2 seconds, enter your TV’s brand code using the number keys, then press OK. Press 1 on the recorder’s remote control to turn on the TV and try operations ( step 2).

●Once you have set the remote control to operate the TV, you do not have to repeat this step until you replace your remote control’s batteries.

●JVC or SAMSUNG has more than one code. If the TV does not function with one code, try entering another.

B Operate the TV.

First, press TV to set the remote control to TV mode, then press the corresponding button: 1, TV/VCR, TV PR +/–, TV %+/– (Volume), ^ (TV Muting), number keys.

●For some brands of TV, you must press OK after having pressed the number keys.

IMPORTANT

Although the provided remote control unit is compatible with JVC televisions, as well as many other models, it may not work with your TV, or in some instances, may have limited function capability.

BRAND NAME	CODE

JVC	01, 23, 24, 25
BLAUPUNKT	19
BRANDT	26
FERGUSON	27
FINLUX	30
FUNAI	32
LG/GOLDSTAR	18
GRAETZ	28
GRUNDIG	19
HITACHI	10
ITT	28
LUXOR	28
MITSUBISHI	03
MIVAR	29
NEC	20
NOKIA	31
NORDMENDE	26
PANASONIC	11
PHILIPS	02
SABA	26
SALORA	28
SAMSUNG	02, 12, 33, 34, 35
SELECO	28
SHARP	06
SONY	07
TELEAVIA	26
TELEFUNKEN	26
THOMSON	26
TOSHIBA	14

Image 43

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Connector coverRear View Front Display Panel ON-SCREEN Display Remote Control Remote Control LCD How To UseConnect the recorder to TV Check the contents10 EN Situate the recorderVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsSelect your country Auto Set Up12 EN Turn on the recorderPress rt to select Auto and press OK or e Perform Auto Set UpSelect the language Press rt to select your language codePress rt to select CH - and press OK or e Perform Preset Download14 EN Set the video channelJust Clock Language for the on-screen display16 EN Access the Main Menu screenAccess the Country Set screen LanguageMake connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller18 EN Setting satellite receivers brand and channelNexTView Link TV Auto Power OnVCR Auto Standby Direct Rec 20 EN Basic PlaybackActivate frame-by-frame playback Slow MotionHigh-Speed Turbo Search Pause during playbackSkip Search 22 ENVariable Speed Search Index SearchSoundtrack Selection Next Function MemoryRepeat Playback Manual Tracking24 EN Tape Remaining Time Instant Timer Recording ITRLocate the start point Engage the Record-Pause mode26 EN RetakeEngage the S-VHS ET mode Received Receiving Stereo and Bilingual ProgrammesRecording Playback30 EN Access the Showview displayAccess the Showview screen Access the Showview Program screenEnter the programme title Set the VPS/PDC modeAccess the Title Edit screen Engage the recorder’s timer mode32 EN Express Timer ProgrammingPress PR+ To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel positionSet the programme start/stop time and channel Enter the programme modeBefore performing the 24 Hour Express Timer Programming 34 ENAccess the Programme Check screen/display Cancel or change a programmeDisengage the timer mode Return to the timer modeOverlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modifyBefore performing the following steps Select the L-2 Select modeRecording mode Programme Recording38 EN NavigationSelect a programme Navigation PlaybackProgramme Navigation Screen Load a recorded cassette Edit Programme Title 40 EN Select the programme Example Enter JVC News Entering CharacterDelete Tape Data Delete the tape data42 EN Remote A/B Code SwitchingSet the remote control code Check the remote control code for the recorderSet the TV brand code TV Multi-Brand Remote ControlOperate the TV Operate the satellite receiver Satellite Receiver Multi-Brand Remote Control44 EN Set the satellite receiver brand codeStart the camcorder Set the recorder’s input modeSet the edit mode Edit From a Camcorder46 EN Access the Output/Input Set screenDecoder connector Select and L-2 Input Setting48 EN Another Video RecorderPlayer 50 EN Audio DubbingPress AUX number key 0 and/or PR to select F-1 or S-1 Engage the Audio Dubbing modeStart dubbing End Audio Dubbing52 EN Insert EditingStart Editing Engage the Insert Editing modeAV Insert Editing Locate the end pointSimple Connections Connecting To a Satellite ReceiverPerfect Connections Set the tuner Select the input mode56 EN Connect the decoderMake connections Connecting/Using a Stereo SystemSelect the mode setting Mode SetAccess the Mode Set screen Select the modeSystem to on or OFF pg When viewing overplayedWhen this function is set to ON, the timer is automatically Disengaged when the recorder is powered back onFunction pg , set PROG. Navigation to OFF On the remote control, or press 7 on the recorderEntire programme while timer-recording in SP mode 60 ENWhen this function is set to ON, you can automatically When this function is set to ON, the Digital 3R pictureWhen this function is set to ON, you can reduce Power consumption while the recorder is turned offAbout Ntsc Playback 62 ENEnter the Guide Program number Showview System SetupGuide Program Number Set Guide Program NumberAuto Channel Set Access the Auto Channel Set screenTuner Set 64 ENView the Confirmation screen Perform Auto Channel SetPress OK twice Manual Channel Set 66 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations a 68 ENSet Stations B Station Name TV Station And ID ListClock Set Access the Clock Set screen70 EN Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data72 EN Access the Video Channel Set modeExit the Video Channel Set mode Video Channel SetPower Recording 74 ENOther Problems Playback 76 ENLines VHS Signal-to-noise ratio 45 dB Horizontal resolutionMemory backup time Approx min Scan systemListe of Terms 78 ENMemo Country code International telephone Language code