JVC HR-J439EE manual Basic Playback, Load a Cassette, Point, Start Playback, Stop Playback

Page 10

10EN

PLAYBACK

Basic

Playback

Turn on the TV and select the VIDEO channel (or AV mode).

HUTTLE

6

q

COLOUR SYSTEM

STOP/EJECT

PLAY

1 2 3

4

5

6

7 8 9

0

The easiest, most basic operation possible with your video recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme.

1		LOAD A CASSETTE
		Make sure the window side is up, the rear label side is
		facing you and the arrow on the front of the cassette is
		point toward the recorder. Don’t apply too much
		pressure when inserting.

		● The recorder power comes on automatically and the
		counter is reset to 0:00:00.
		● Select the appropriate colour system by pressing the
		COLOUR SYSTEM button. (☞ pg. 22)
		● If the record safety tab has been removed, playback
		begins automatically.

		FIND PROGRAMME START
2		POINT
		If the tape is advanced past the start point, press REW or
	turn the SHUTTLE ring to the left and release it.
	To go forward, press FF or turn the SHUTTLE ring to the
	right and release it.

3		START PLAYBACK
3		Press PLAY. "B.E.S.T." appears on screen. (☞ pg. 16)
4		STOP PLAYBACK
		Press STOP on the remote or STOP/EJECT on the
		recorder’s front panel. Then press STOP/EJECT to
		remove the cassette.

PLAY

SP/LP/EP

REW

STOP

TV PROG.

FF

Manual Tracking

Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG. button.

1Press SP/LP/EP () on the remote to engage manual tracking.

2Press TV PROG. 5 or ° to adjust tracking.

3Press SP/LP/EP () on the remote to re-engage automatic tracking.

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

Image 10

Contents HR-J439EE Safety Precautions ContentsBasic Connections Check ContentsInstalling Your NEW Record ER EN Situate RecorderSelect Televi- sion System Tune The TV To Your Video RecorderTurn on the Recorder ENABLE/DISABLEOn-Screen Displays Select LanguageEN Initial Settings Access Channel SETMode Select Screen Tuner Set Store Channel Select Mode Select Position Select ChannelFine-Tuning Channels Already Stored Perform TuningProg SET SET Date Clock SetSET Time SET YearPoint Basic PlaybackLoad a Cassette Start PlaybackPause During Playback Playback FeaturesActivate HIGH-SPEED Search Playback Activate Instant ReviewActivate Repeat Activate Scene FinderSET Counter Memory SET A/B Code SwitchRE-SUPPLY Power Activate CounterBasic Recording Recording Features EN Recording Access Mode SelectS.T. Picture System RecordingPlayback Ming Screen TimerProgramming Enter Programme Stop TimeReturn to Normal Timer ModeTimer Engage RECORDER’SMake Connections SET Recording DECK’S Input ModeEdit To Or From Another Video Recorder Start Source PlayerStart Camcorder SET RECORDER’S Input ModeEdit From a Camcorder Start RecorderSetting Of The Colour System Select Buttons Off-Air RecordingPlayback equipment Tape-To-Tape EditingDubbed tape SET TV Brand Code Multi-Brand Remote ControlControl Your TV Using Addi- tional Buttons TRY Operating TVTroubleshooting E N Corrective ActionTimer again OubleshootingQuestions and Answer S Playback RecordingIndex OperateDisplay Panel Installing Batteries How To UseDo not place the recorder SpecificationsPrecautions Do not block the recorder’s ventilation openingsHR-J439EE