TROUBLESHOOTINGEN25
Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your video recorder off for repair.
POWER |
|
|
|
| |
|
|
|
|
|
|
| SYMPTOM |
| POSSIBLE CAUSE |
| CORRECTIVE ACTION |
1. | No power is applied to the |
| ● The mains power cord is discon- |
| Connect the mains power cord. |
| recorder. |
| nected. |
|
|
|
|
|
|
|
|
2. | The clock is functioning properly, |
| ● “TIMER“ is displayed on the display |
| Press the TIMER button to turn the |
| but the recorder cannot be |
| panel. |
| "TIMER" indicator off. |
| powered. |
|
|
|
|
|
|
|
|
| |
TAPE TRANSPORT |
|
|
|
| |
| SYMPTOM |
| POSSIBLE CAUSE |
| CORRECTIVE ACTION |
1. | The tape does not run during |
| ● The recorder is in the Pause mode. |
| Press PLAY to disengage the Pause |
| recording. |
|
|
| mode. |
|
|
|
|
|
|
2. | The tape stops during rewind or |
| ● “M“ is displayed on the display |
| Press C.MEMORY to deactivate the |
|
| panel. |
| Counter Memory function and turn | |
|
|
|
|
| the “M“ indicator off. |
|
|
|
|
|
|
3. | The tape will not rewind or fast- |
| ● The tape is already fully rewound or |
| Check the cassette. |
| forward. |
|
|
| |
|
|
|
|
| |
PLAYBACK |
|
|
|
| |
|
|
|
|
|
|
| SYMPTOM |
| POSSIBLE CAUSE |
| CORRECTIVE ACTION |
1. | The playback picture does not |
| ● If you’re using the RF OUT connec- |
| If you are using the RF OUT connec- |
| appear while the tape is running. |
| tion, the TV receiver’s channel |
| tion, set the TV receiver to the RF |
|
|
| selector is set to the wrong video |
| converter channel (UHF 36). (☞ pg. 3) |
|
|
| channel. |
|
|
|
|
| ● If you’re using the AV connection, |
| If you are using the AV connection, |
|
|
| the TV receiver is not set to the AV |
| set the TV to its AV mode. |
|
|
| mode. |
|
|
|
|
|
|
|
|
2. | Noise appears during visual search. |
| ● This is normal. |
|
|
|
|
|
|
|
|
3. | Noise appears during normal |
| ● The automatic tracking mode is |
| Try manual tracking. (☞ pg. 10) |
| playback. |
| engaged. |
|
|
|
|
|
|
|
|
4. | Noise appears during |
| ● The automatic tracking mode is |
| Try manual tracking. (☞ pg. 10) |
| playback. |
| engaged. |
|
|
|
|
|
|
|
|
5. | Noise appears during still play- |
|
|
| Press TV PROG. 5 or ° a few times to |
| back. |
|
|
| remove the noise bars from the screen. |
6. | The playback picture is blurred or |
| ● The video heads may be dirty. |
| Consult your JVC dealer. |
| interrupted while TV broadcasts are |
|
|
|
|
| clear. |
|
|
|
|
|
|
|
|
|
|
7. | Playback picture has a loss of |
| ● The wrong colour system is selected |
| Select the correct colour system by |
| colour. |
| for the tape being played back. |
| pressing the COLOUR SYSTEM |
|
|
|
|
| button. (☞ pg. 22) |
|
|
| ● The wrong colour system was |
| Once recorded, the signal cannot be |
|
|
| selected during recording. |
| corrected. Be sure to choose the |
|
|
|
|
| correct setting before recording. |
|
|
|
|
|
|
8. | No sound accompanies the |
| ● The SYSTEM switch on the |
| Set it to the correct position for the |
| playback picture. |
| recorder's rear panel is set to the |
| TV broadcast system used in your |
|
|
| wrong position. |
| area. (☞ pg. 4.) |
|
|
|
|
|
|
CONTINUED ON NEXT PAGE.