JVC HR-J439EE manual Setting Of The Colour System Select Buttons, Off-Air Recording

Page 22

22EN

INFORMATIONONMULTI-SYSTEMCOMPATIBILITY

Setting Of The Colour System Select Buttons

Mode

AUTO

NTSC 3.58

COLOUR

SYSTEM

NTSC 4.43

NTSCPAL*

PAL

MESECAM

* "NTSC [ PAL" appears during playback only.

Use the COLOUR SYSTEM button on the recorder's front panel to select the colour system. Pressing this button changes the mode as illustrated on the left. The On-Screen display will show which mode is selected.

Mode Display

Description

 

 

AUTO

Usually set to this mode. This mode

(Colour Signal)

automatically detects PAL, NTSC, SECAM

 

or MESECAM and adjusts to the colour

 

system being recorded or played back.

 

When it does not perform properly, set the

 

colour system manually.

 

 

MANUAL

For recording, there is a choice of 4

(Colour Signal)

selectable modes; PAL/MESECAM/NTSC

 

3.58/NTSC4.43. Select the mode that

 

matches the colour signal being received.

 

For playback, there is an additional mode

 

which allows NTSC tapes to be played

 

back and viewed on PAL TVs.

 

 

NOTES:

●In the AUTO mode, NTSC signals will be automatically recorded as NTSC 3.58.

●In the AUTO mode, NTSC tapes will be played back as NTSC 3.58.

●SECAM signals will always be recorded as MESECAM. Select the AUTO or the MESECAM mode when recording SECAM signals.

●When playing back a SECAM tape, select the AUTO or the MESECAM mode. The playback picture will always be monochrome.

●In the NTSC4.43 mode, with some TVs, on-screen displays (Program screen etc.) may roll up or down and there may be a loss of colour. When this happens, select the AUTO mode.

Off-Air Recording

The built-in multi-system tuner is capable of receiving PAL B/G and D/K, and SECAM B/G and D/K broadcasts.

TV system

HR-J439EE

Recorded tape

PAL B/G, D/K

SECAM B/G, D/K (OIRT)

Multi-system tuner (B/G, D/K)

Recording circuit

PAL

MESECAM

PAL

MESECAM

NTSC 3.58

NTSC 4.43

NOTE:

This model does not operate in BRAZIL (PAL-M) or ARGENTINA (PAL-N).

Page 21 Page 23
Image 22
Page 21 Page 23
Contents HR-J439EE Safety Precautions ContentsBasic Connections Check ContentsInstalling Your NEW Record ER EN Situate RecorderSelect Televi- sion System Tune The TV To Your Video RecorderTurn on the Recorder ENABLE/DISABLEOn-Screen Displays Select LanguageEN Initial Settings Access Channel SETMode Select Screen Tuner SetStore Channel Select ModeSelect Position Select ChannelFine-Tuning Channels Already Stored Perform TuningProg SET SET Date Clock SetSET Time SET YearPoint Basic PlaybackLoad a Cassette Start PlaybackPause During Playback Playback FeaturesActivate HIGH-SPEED Search Playback Activate Instant ReviewActivate Repeat Activate Scene FinderSET Counter Memory SET A/B Code SwitchRE-SUPPLY Power Activate CounterBasic Recording Recording Features EN Recording Access Mode SelectS.T. Picture System RecordingPlayback Ming Screen TimerProgramming Enter Programme Stop Time Return to Normal Timer Mode Timer Engage RECORDER’SMake Connections SET Recording DECK’S Input ModeEdit To Or From Another Video Recorder Start Source PlayerStart Camcorder SET RECORDER’S Input ModeEdit From a Camcorder Start RecorderSetting Of The Colour System Select Buttons Off-Air RecordingPlayback equipment Tape-To-Tape EditingDubbed tape SET TV Brand Code Multi-Brand Remote ControlControl Your TV Using Addi- tional Buttons TRY Operating TVTroubleshooting E N Corrective ActionTimer again OubleshootingQuestions and Answer S Playback RecordingIndex OperateDisplay Panel Installing Batteries How To UseDo not place the recorder SpecificationsPrecautions Do not block the recorder’s ventilation openingsHR-J439EE
Top Page Image Contents