JVC HR-J439EE manual Tuner Set, Access Channel SET, Mode Select Screen, SET Desired Channel

6ENINITIALSETTINGS(cont.)

Tuner Set

●Turn on the TV and select the VIDEO channel (or AV mode).

●Be sure to select the AUTO mode by pressing the COLOUR SYSTEM button. (☞ pg. 22)

	V
H	PROG
SET	.
	6
	q
OPERATE	STORE	OK

OPERATE

1 2 3

4 5 6

7 8 9

0

TV PROG.

OK

Your recorder needs to memorise all necessary stations in channel positions in order to record TV programmes. Once stored, you can call them up with the TV PROG. buttons without going through any vacant channels.

TURN ON THE RECORDER

1 Press OPERATE.
		ACCESS CHANNEL SET
2		MODE SELECT SCREEN
		Press and hold CH SET for more than 2 seconds. The
	Channel Set Mode Select screen appears.
3		SELECT MODE
		Turn the TV PROG. dial to
	place the pointer next to		SEARCH/STORE
	"SEARCH/STORE", then		DELETE
	press OK. The Band Select		FINE TUNING
	screen appears.
			[TV PROG5°] =
			[CANCEL] :EXIT
4		SELECT BAND
		Turn the TV PROG. dial to place the pointer next to the
	band of your choice, then press OK to initiate Auto
	Channel Search.
		BAND SELECT	AUTO SEARCH PROCEEDING
		VHF L	PLEASE WAIT
		VHF H
		UHF	VHF L 00
		[TV PROG5°] =	[CH SET] :EXIT
		[CH SET] :EXIT
		SET DESIRED CHANNEL
		The following screen
		appears when a station is
5 detected. To store the			STORE
		detected station, place the	CONTINUE
		pointer next to "STORE" by
		turning the TV PROG. dial,
	then press OK.		[TV PROG5°] =
	If you don't want to store		[CH SET] :EXIT
	the station, turn the TV
	PROG. dial to place the pointer next to "CONTINUE",
	then press OK. Auto Channel Search will start resume.

●The blueback screen and the TV picture currently being broadcast appear alternately for 8 seconds each.

NOTES:

●You can also use the TV PROG. 5/° button on the remote control instead of the TV PROG. dial.

●You can also use the SHUTTLE ring on the recorder instead of the OK button.