JVC HR-J439EE Timer, Programming, Ming Screen, Enter Programme Stop Time, Enter Programme Date

18EN

TIMERRECORDING

Timer	Before performing the following steps:
	● Insert a cassette with the safety tab in place. The recorder will
	come on automatically.
	● Turn on the TV and select the VIDEO channel (or AV mode).
	● Select the appropriate colour system by pressing the
Programming		ACCESS MODE SELECT
	COLOUR SYSTEM button.(☞ pg. 22)
Remember, the clock must be set before you can	1	SCREEN
		Press PROG.
programme the timer (☞ pg. 9).
		ACCESS TIMER PROGRAM-
		MING SCREEN
		Press TV PROG.5/° to
6		place the pointer next to	TIMER PROGRAMMING
	2 "TIMER PROGRAM-
q			CLOCK SET
		MING", then press OK on
		the remote control.

	SP/LP	TIMER
AUTO

PROG.

	1	2	DAILY
			3
NUMBER	4	5	6
	7	8	9	WEEKLY

CANCEL 0 TIMER

TV

3

[TV PROG5°] = [CANCEL] :EXIT

ENTER PROGRAMME START TIME

Press NUMBER key "1(5)"		– P1–
or "4(°)" to enter the time	START	STOP
you want recording to	21:00	= – –:– –
start.		SP
	DATE	TV PROG.
● Press and hold either
button to delay or	25.12	– –
	[1–6] [TV PROG5°]
advance the time by 30	[PROG./CLOCK] :NEXT

minutes.

●If the Programme is already used, press PROG. until a vacant Programming screen appears.

ENTER PROGRAMME STOP TIME

SP/LP/EP	PROG
	.

OK

4

Press NUMBER key "2(5)" or "5(°)" to enter the time you want recording to stop.

●Press and hold either button to delay or advance the time by 30 minutes.

–P1–

START STOP

21:00	= 22:00
	SP
DATE	TV PROG.

25.12– –

[1–6] [TV PROG5°] [PROG./CLOCK] :NEXT

5

ENTER PROGRAMME DATE

Press NUMBER key "3(5)" or "6(°)" to enter the date.