JVC HR-S9600EK setup guide Playback, Activate HIGH-SPEED Search

Still

13

Slow Motion

					e
				s
			r
		e			y
		v
	e			a
R			l
			p

e
s	h
r c
e	r
v a
e e
R	s

					e	Sl
				rs				o	w
		e
	v
e					w	m	o	ti
R
			o
		l						o
	s								n

8

Pl a y

F
so
e
r
aw
r	a
c
	r
h d

ACTIVATE SLOW-MOTION PLAYBACK

1 During playback or still, turn the SHUTTLE ring to the right for forward slow motion, or to the left for reverse slow motion (refer to the illustration to the left).

OR

During still picture, press and hold PAUSE for 2 seconds, then release. Press and release again to return to still picture.

OR

During still picture, press and hold @ or #. Release to return to still picture.

NOTES:

●Refer to the SHUTTLE ring illustration above as you read the following procedures.

●Reverse playback is possible only with a tape recorded in SP mode.

Still Picture/Frame-By-Frame Playback

1		PAUSE DURING PLAYBACK
		Press PAUSE.
		● During still picture, the sound from the previous
		3 seconds (approx.) will be played back repeatedly
		(provided there was at least 6 seconds of normal
		playback prior to engaging the still picture mode).
		● "TIME SCAN AUDIO" must be set to "ON", or the
		sound will not be heard. (☞ pg. 27)
		ACTIVATE FRAME-BY-FRAME
2		PLAYBACK
		Turn the JOG dial to the right for forward frame-by-
		frame playback, or to the left for reverse frame-by-frame
		playback.
	OR
		Press PAUSE.
	OR
		Press @ or #.

To resume normal playback, press PLAY.

ATTENTION

●The operations by JOG dial/SHUTTLE ring do not include TimeScan (☞ pg. 26).

●In the high-speed search, still, slow-motion or frame-by- frame playback mode,

●the picture will be distorted.

●noise bars will appear.

●there will be a loss of colour with a tape recorded in LP mode.

●Picture may not appear during high-speed search with a tape recorded in LP mode.

●When normal playback resumes from search, still, slow motion or frame-by-frame playback, the picture may jitter vertically momentarily depending on the type of TV being used.

To resume normal playback, press PLAY.

NOTE:

For Time Jog, see page 27.

High-Speed (Turbo) Search

ACTIVATE HIGH-SPEED

SEARCH

1 During playback or still, turn the SHUTTLE ring all the way to the right for forward high-speed search, or to the left for reverse high-speed search. Releasing SHUTTLE resumes still picture playback.

OR

During playback or still, press FF for forward high- speed search, or REW for reverse high-speed search.

To resume normal playback, press PLAY.

NOTE:

For short searches, press and hold FF or REW during playback or still picture. When released, normal playback resumes.

Variable-Speed Search

ACTIVATE VARIABLE-SPEED SEARCH

1 During playback or still, turn the SHUTTLE ring to the right for forward variable-speed search, or to the left for reverse variable-speed search (refer to the illustration above).

To resume normal playback, press PLAY.

NOTE:

Variable-speed search with TimeScan (☞ pg. 26) can be used by pressing the remote control's @ or #button.