JVC HR-S9600EK Looking For Scene You Want, Activate Index Search, Activate Instant Review

Looking For

The Scene

You Want

25

Index Search

Your recorder automatically marks

index codes at the beginning of£ 2 each recording. Additional index

codes can be added manually during playback. (See Below.) This function gives you quick access to any one of 9 index codes in either direction.

NOTE:

Before starting, make sure the recorder is in the Stop mode.

2

1 2 3

45 6

78 9

0

1

REVIEW

30 SEC

3

4

4

3

ACTIVATE INDEX SEARCH

1 Press @ or # (ª or £). “ª 1” or “£ 1” is displayed on screen and search begins in the corre- sponding direction.

● To access index codes 2 through 9, press @ or #

repeatedly until the correct index number is dis-

played.

Ex.: To locate the beginning of B from the current

2

￿

position, press @ twice.

To locate the beginning of D from the current

position, press # once.

Current position

A	B C		D	E	F
–2		–1	1	2	3
		￿

Index number

●When the specified index code is located, playback begins automatically.

Instant ReView

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

ACTIVATE INSTANT

REVIEW

1 Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

●The front display panel tells you how many programmes have been timer-recorded. If you have, for example, 3 programmes, “REVIEW” and "3" appear and blink. The REVIEW indicator on the recorder also blinks. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

NOTES:

●Instant ReView is not possible while the recorder is in the Timer mode.

●The number of recorded programmes will not be displayed on the front display panel after Auto Satellite Prog recording (☞ pg. 30).

Manual Index Mark/Erase

To mark an index code...

...during playback press INDEX MARK on the recorder.

●The recorder will mark an index code at that location.

●If "O.S.D." is set to "ON" (☞ pg. 47), "MARK" blinks on the screen while an index code is being marked.

To erase an index code...

...during playback or still press INDEX ERASE on the recorder.

●The recorder will fast-forward to the nearest index code and erase it. Playback continues after the index code is erased.

●If "O.S.D." is set to "ON" (☞ pg. 47), "ERASE" blinks on the screen while an index code is being erased.

Skip Search

	SKIP OVER UNWANTED
1	SECTIONS
	Press 30 SEC 1 to 4 times during playback. Each press
	initiates a 30-second period of fast-motion playback.
	Normal playback resumes automatically.

NOTE:

To return to normal playback during a Skip Search, press PLAY.