JVC HR-S9600EK setup guide Selecting Sound You Want, Control Screen, Adjust Audio, Recording Level

28ADVANCEDOPERATIONS(cont.)

Selecting The

Sound You

Want

AUDIO MONITOR

Hi-Fi Audio Recording LEVEL Control

In most cases, setting the Hi-Fi audio recording level control to the centre position will provide satisfactory results. If necessary, you can adjust the Hi-Fi audio recording level more precisely by reffering to the audio level indicator on the front panel.

	ACCESS MAIN MENU
1	SCREEN
	Press MENU.
	ACCESS HI-FI REC LEVEL
2	CONTROL SCREEN
	Press %Þ to move the highlight bar (pointer) to “REC
	LEVEL CTL”, then press OK or #.
	ADJUST AUDIO
3	RECORDING LEVEL
	Press % or Þ.
	HI-FI REC LEVEL CONTROL
	MIN +	MAX

1– –:– –

AUDIO

2

1 2 3

45 6

78 9

0

1

2MENU

3

4

4

3 OK

[ ]

5°

[MENU] : EXIT

●Press % or Þ briefly 5 times to move the on-screen's audio levels by one division on the scale. To move the audio levels faster, keep % or Þ pressed.

●Adjust the recording level while watching the recorder's audio level meters. Set the level so that maximum volume causes the meters to vary between 0dB to 4dB.

RETURN TO NORMAL

SCREEN

4 Press MENU.

￿

NOTES:

●Noise will increase if the recording level is too low, while distortion will increase if the level is too high.

●When you finished Hi-Fi Audio recording, be sure to set the level control back to its centre position.