JVC HR-S9600EK setup guide Delete a Channel, Change Station Preset Position

Delete A Channel

Perform steps 1 and 2 of "Storing Channels Manually" on page 56 to access the Confirmation screen before continuing.

1	SELECT ITEM
	Press %Þ @ #until the item you want to delete begins
	blinking.
2	DELETE CHANNEL
	Press .
	● The item directly beneath the cancelled one moves
	up one line.
	● Repeat steps 1 and 2 as necessary.
3	CLOSE CONFIRMATION SCREEN
	Press MENU.

Change Station Preset Position

Perform steps 1 and 2 of "Storing Channels Manually" on page 56 to access the Confirmation screen before continuing.

	SELECT ITEM
	Press %Þ @ #until the item you want to move begins
	blinking. Then press OK and the station name (ID) and
1 its channel (CH) number begin blinking.
2	SELECT NEW POSITION
	Press %Þ @ #to move the station to the new preset
	position, then press OK.
	Example: If you moved the station in position 4 to
				position 2, the stations originally in positions
				2 and 3 each move down one space.
		PR	CH	ID	PR CH	ID	PR	CH	ID	PR CH	ID
	01		26	BBC1	08	– – – –	01	26	BBC1	08	––––
	02		23	ITV	09	– – – –	02	33	BBC2	09	––––
	03		30	CH4	10	– – – –	03	23	ITV	10	––––
		04	33	BBC2	11	– – – –	04	30	CH4	11	––––
		05	37	CH5	12	– – – –	05	37	CH5	12	––––
	06			– – – –	13	– – – –	06		––––	13	––––
	07			– – – –	14	– – – –	07		––––	14	––––
		[5°55] : MOVE					[5°55] : MOVE =
			: MANUAL CH SET
		[MENU] : EXIT					[MENU] : EXIT

●Repeat steps 1 and 2 as necessary.

CLOSE CONFIRMATION SCREEN

3 Press MENU.

NOTE:

57

Fine-Tuning Channels

Already Stored

Perform steps 1 and 2 of "Storing Channels Manually" on page 56 to access the Confirmation screen before continuing.

SELECT CHANNEL TO FINE-TUNE

1 Press %Þ @ #until the channel you want to tune begins blinking.

ACCESS MANUAL

CHANNEL SET SCREEN

2 Press OK twice. The Manual Channel Set screen appears.

PERFORM TUNING

3 Press #until "+/–" begins blinking, then press %Þ until the picture is clearest. Then press OK.

●The Confirmation screen appears.

●Repeat steps 1 through 3 as necessary.

CLOSE CONFIRMATION SCREEN

4 Press MENU.

ATTENTION

If channel positions are changed or deleted, the Guide Program numbers that have been set are reset.

●Example 1: If a channel is deleted, all the Guide Program numbers are reset.

●Example 2: If a channel is changed from position 4 to position 2, the Guide Program numbers above position 4 are reset.

●Example 3: If a channel is changed from position 4 to position 6, the Guide Program numbers above position 6 are reset.

*In Examples 2 and 3, if the channel is moved to position 10 before OK is pressed, the Guide Program numbers above position 10 are reset.

If an attempt is made at timer programming with VIDEO Plus+ in this state, the “GUIDE PROG SET” screen appears; set the Guide Program numbers on this screen. ☞ “ATTENTION – Regarding Guide Program Number Set” on pg. 17.

Or perform “Guide Program Number Set” (☞ pg. 62).

The characters available for the station name (ID) are A–Z, 0–9, –, *, +, (space) (maximum of 4).