JVC HR-J430KR manual Access Auto SP/EP, Place the arrow next to Auto SP/EP Timer by

Page 31

OK

6

q

°5

CH

1 2 3

4

5

6

7 8 9

0

CH

OK

MENU

PUSH JOG

NOTES:

● If you have programmed the VCR to timer-record 2 or more programs, the second program and those thereafter may not fit on the tape if you set the Auto SP/EP Timer mode to "ON". In this case, make sure the mode is not engaged, then set the tape speed manually during timer programming.

● There may be some noise at the point on the tape where the VCR switches from SP to EP mode.

● The Auto SP/EP Timer feature is not available during ITR (Instant Timer Recording), and the feature will not work properly with any tapes other than the following: T-30, T-60, T-90, and T-120.

31

Auto SP/EP Timer

If, when recording in SP mode, there is not enough tape to record the entire program, the VCR automatically switches to EP mode to allow complete recording. This feature is especially handy when recording a program of more than 2 hours in length.

For Example . . .

Recording a program of 140 minutes in length onto a 120- minute tape

Approximately 110 minutes	Approximately 30 minutes

SP mode	EP mode

Total 140 minutes

Make sure you select “ON” at the Auto SP/EP Timer screen before performing timer programming.

		ACCESS MAIN MENU
1		SCREEN
1		Press MENU as many times as necessary.
		ACCESS FUNCTION SET
2		SCREEN
		Place the arrow next to "FUNCTION SET" by pressing
		CH5° or PUSH JOG5°, then press OK.
		ACCESS AUTO SP/EP
3		TIMER SCREEN
		Place the arrow next to “AUTO SP/EP TIMER” by
		pressing CH5° or PUSH JOG5°, then press OK.
4		SELECT MODE
		Place the arrow next to			AUTO SP/EP TIMER
		your choice (“ON” or			AUTO SP/EP TIMER
		your choice (“ON” or
		“OFF”) by press CH5		or	=ON
	PUSH JOG5°.		°		OFF
					PRESS (5,°) TO SELECT
					PRESS (MENU) TO END

		RETURN TO NORMAL
5		SCREEN
5		Press MENU as many times as necessary.

Image 31

Contents HR-J430KR Do not place the VCR Dear CustomerContents Basic Connections SET Date and Time ClockMake Corrections Tuner Return to Normal Screen Perform Auto Channel SETStore Desired Channel Access Tuner SET ScreenAccess AFC Screen Make SelectionAccess Main Menu Screen Code SetupInput Guide Channel Number Access Initial SET ScreenAccess G-CODE SET-UP Screen Access Guide Channel SET ScreenInput Receiving Channel Number Return to G-CODE SET UP ScreenReturn to Normal Start Playback Simple PlaybackLoad a Cassette Find Program Start PointSimple Recording Slow Motion/ Reverse Slow Motion Pause During PlaybackActivate FRAME-BY Frame Playback Still Picture/Frame-By- Frame PlaybackHigh-Speed Search Activate VARIABLE-SPEED SearchActivate HIGH-SPEED Search Variable-Speed Search Reverse PlayManual Tracking Engage Manual Tracking ModeAdjust Manual Tracking RE-ENGAGE Automatic TrackingAccess Superimpose Access Function SETSuperimpose Stop Repeat Access Distant CodeSkip Over Unwanted Sections Start RepeatReturn to Counter Position Zero Activate Instant ReviewActivate Counter MemoryNext-Function Memory Tape Position IndicatorRelation to B Beginning or E End shows you where you are on Press REW, then press Timer within 2 secondsPreparation Access B.E.S.T. Picture System ScreenSelect Mode S.T. Picture SystemBegins with the picture Level optimized RecordingPress and hold REC Quality of the tape Use, then recordingTape in use PlaybackSelect Channel for Viewing Engage TV ModeReset Counter to Zero RecordingPress REC Instant Timer Recording ITREngage ITR Mode SET Recording DurationAccess G-CODE Screen Code Timer ProgrammingEnter G-CODE Number CHECK/CORRECT Input Engage Timer ModeData Menu On-Screen Timer ProgrammingAccess ON-SCREEN Access Program SET ScreenExample SET Program InformationCheck And Cancel Programs Disengage TimerCancel a Program RE-ENGAGE TimerPressing CH 5 or Push JOG 5, then press OK Access Auto SP/EPAuto SP/EP Timer Place the arrow next to Auto SP/EP Timer byAuto Timer Access Auto Timer19, 20 Special FeaturesEdit From a Camcorder Control Two JVC VCRs SET RECORDER’S Input ModeEdit To Or From Another Load CassettesPrepare for Editing Random As- semble EditingStart R.A. Edit END R.A. EditCassette gets stuck partway TroubleshootingHas not been programmed correctly Cassette is automatically Timer againRe-perform the G-Code setup Doesn’t work properly When scanning channels, someQuestions and Answers Frequency-synthesized tuner EIA monochrome signalMaximum recording time 210 min. with ST-210 video 630 min. with ST-210 videoIndex Ramdom Assemble Editing connector pgFront Display Panel Remote Control ProvidedHR-J430KR