JVC HR-VP830U manual Select D.S.T. Mode, Select Mode, SET DATE, Time and D.S.T, Make Corrections

D.S.T. SELECT

=AUTO

ON

OFF

PRESS (5,°) TO SELECT

PRESS (MENU) TO END

	CH	8	9
• •	• • •
•	•
• •	• •

MENU OK

11

SELECT D.S.T. MODE

You have three choices: a–Select “AUTO” and the adjustment to your VCR’s clock will be made according to the incoming signal from the host channel.

b–Select “ON” and the adjustment will be made based on the clock itself.

c–Select “OFF” if Daylight Saving Time doesn’t apply to you.

Place the arrow next to your choice by pressing CH5° or TIME SCAN 5°, then press MENU and the Semi- Auto Clock Set screen reappears.

	1	2	3
NUMBER	4	5	6
	7	8	9
		0

CH

OK

MENU

TIME SCAN

**AUTO DAYLIGHT SAVING TIME

This function enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time. With Auto DST activated, . . .

. . . on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM.

. . . on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.

Auto

5		SELECT MODE
	°
		At the Override Auto Clock Set screen, place the arrow
		next to "AUTO CLOCK SET" by pressing CH▲▼ or
	TIME SCAN 5 , then power off the VCR. Do not
		power it on again until the clock has been adjusted.
		The clock is automatically adjusted on the hour except
		at 11:00 PM, midnight, 1:00 AM and 2:00 AM. (The
		clock will be adjusted on the hour based on the time
		displayed on the VCR, not on the actual real time.)

IMPORTANT

After setting the Semi-Auto clock set, make sure that the VCR is off before the next hour so that the clock can be adjusted. (The clock is automatically adjusted on the hour except at 11:00 PM, midnight, 1:00 AM and 2:00 AM.)

Manual

5	SELECT MODE
	°
	At the Override Auto Clock Set screen (☞ pg. 10), place
	the arrow next to “MANUAL CLOCK SET” by pressing
	CH▲▼ or TIME SCAN 5 , then press OK.

SET DATE, TIME AND D.S.T.
The Manual Clock Set	MANUAL CLOCK SET
screen is displayed and the
6 first setting that can be set	DATE	1/ 1/96 MON
	TIME	– – : – – AM
begins flashing.	D.S.T.	ON
Press the appropriate
NUMBER keys to set the	PRESS NUMBER KEY(0-9)
date and time (if only 1
	OR (5,°), THEN (OK)
digit, press "0" first). Press
	PRESS (MENU) TO END
CH▲▼ or TIME SCAN
5° to set AM/PM and D.S.T. (Daylight Saving Time) to
“ON” (automatic adjustment based on VCR’s clock) or
“OFF” (if D.S.T. doesn’t apply to you).
Press OK after AM/PM and D.S.T. settings. The next
setting that can be set begins flashing. When you’re
finished with this set-up procedure, press MENU to start
the clock.

NOTE:

CH5° and TIME SCAN 5° can be used to perform all operations. (In this case, press OK after each setting.)

MAKE CORRECTIONS

7 To change any of the settings, press OK or TIME SCAN ª £ until the item you want to change blinks, then set as in step 6.