JVC HR-VP830U manual Turn on DSS Receiver, Enter DSS Receiver Brand, Set DSS Receiver Brand

24

INITIALSETTINGS(cont.)

Set DSS Receiver Brand

	CH
	8
• •	• • •
•	•
• •	• •

1

TURN ON DSS RECEIVER

Select a channel other than channel 205 on your DSS receiver.

ACCESS DSS RECEIVER BRAND SET SCREEN

2

At the Custom Set screen, press CH5° or TIME SCAN 5° to place the arrow next to “DSS

RECEIVER BRAND SET”, then press OK.

CUSTOM SET

OVERRIDE AUTO CLOCK SET

LANGUAGE SELECT

VCR PLUS+ SET-UP DSS RECEIVER OUTPUT

=DSS RECEIVER BRAND SET PRESS (5,°), THEN (OK)

PRESS (MENU) TO END

ENTER

1 2 3

ENTER DSS RECEIVER BRAND

NUMBER	4	5	6
	7	8	9
		0

CH

3

Press the appropriate NUMBER keys to enter the DSS Receiver Code from the following list, then press ENTER.

The unit is pre-set to code 80 (RCA) when shipped.

DSS RECEIVER BRAND SET

80

SELECT BRAND NO. AND PRESS (ENTER)

PRESS (MENU) TO END

OK

MENU

TIME SCAN

NOTES:

●Depending on the type of DSS receiver, it is possible that the Controller will not work with it.

●If your DSS receiver doesn’t respond to the code, you can’t use the Controller to change satellite channels. In this case, make sure to leave the DSS receiver turned on and tuned to the proper channel before the scheduled start of timer recording.

●The VCR can only change the satellite channel through the Controller during timer recording.

●If your DSS receiver is one that can’t be operated with a remote control (has no remote sensor), you can’t use the Controller to change its channels. Make sure to leave the DSS receiver turned on and tuned to the proper channel before the scheduled start of timer recording.

●If you are unable to set the Controller, please contact JVC toll free at 1-800-252-5722.

4

●If the DSS receiver's

channel changes to 205, setting is complete.

BRAND	CODE
RCA	80
SONY	81

RETURN TO NORMAL SCREEN

Press MENU as many times as necessary.