JVC HR-VP830U manual Make Connection, Tape Position Indicator, Next-Function Memory

Page 33

POWER	PLAY	SCAN SHUTTLE
		TIME

	8
• •	• • •
•	•
• •	• •
MENU	FF
MENU	REW

POWER

1 2 3

4

5

6

7 8 9

33

Tape Position Indicator

The Tape position indicator
appears on screen when, from the
stop mode, you press FF, REW, or
use the TIME SCAN SHUTTLE ring,				+	+	+
or perform an Index Search or			B	+	+	+	E
Instant ReView. The position of "
" in relation to "B" (Beginning) or				COUNT			0:33:27
"E" (End) shows you where you are				COUNT			0:33:27
on the tape.

NOTE:

"SUPERIMPOSE" must be set to "ON", or the indicator will not appear (☞ pg. 30).

Next-Function Memory

The Next Function Memory “tells” the VCR what to do after rewinding. * Before continuing, ensure that the VCR is in stop mode.

a– For Automatic Start Of Playback After Tape Rewind . . .

. . . press REW, then press PLAY within 2 seconds. b– For Automatic Power Off After Tape Rewind . . .

. . . press REW, then press POWER within 2 seconds. c– For Automatic Timer Standby After Tape Rewind . . .

. . . press REW, then press TIMER within 2 seconds.

NOTE:

0

LAY

REW

C.MEMORY

MENU

TIMER

FF

If you want the "next function" to automatically start when the counter reads "0H 00M 00S" (instead of at the beginning of the tape), press C. MEMORY so that the counter memory indicator appears on the front display panel before pressing REW or FF.

AV COMPU LINK Playback

Your VCR is compatible with JVC’s AV COMPU LINK components, including amplifiers (or receivers) and televisions. AV COMPU LINK provides one touch control of the audio and video compo- nents that are linked via their AV COMPU LINK connectors.

For example: simply load a cassette in the VCR and press PLAY and the AV COMPU LINK components automatically power on, the TV's VIDEO mode is selected and the VCR goes into play mode. (PLAY need not be pressed if the cassette's record safety tab is removed.)

1	MAKE CONNECTION
	Connect your VCR to an AV COMPU LINK component
	as shown in the illustration on page 34.

	● The mini-plug cable is a mono 3.5 mm mini-plug to
	mono 3.5 mm mini-plug connector.

2	TURN ON THE VCR
2	Press POWER.
	ACCESS MAIN MENU
3	SCREEN
3	Press MENU as many times as necessary.

CONTINUED ON NEXT PAGE.

Image 33

Contents HR-VP830U Do not place the VCR Dear CustomerPower Cord Protection Power SourcesPower Lines Grounding or PolarizationDamage Requiring Service AccessoriesCleaning Replacement PartsContents Basic Connections Dual Quick Set Initial SettingsPerform Dual Quick SET Auto Clock Set/Auto Tuner SetAccess Custom SET Screen Access ON-SCREEN MenuLanguage Turn on the VCRClock PreparationOverride Auto Select Host Channel Access Select ScreensSelect Time Zone Semi-AutoSelect Mode Select D.S.T. ModeSET DATE, Time and D.S.T Make CorrectionsTuner Return to Normal Screen Perform Auto Channel SETAccess AFC Screen Access Tuner SET ScreenMake Selection Store Desired ChannelSituate Controller Cable Box ControlAttach Controller Connect Cable BOX to VCRScan 5 to place Press CH5 or TimeArrow next to Custom SET, then press OKTurn on Cable BOX Access Cable BOXBrand SET Screen Set Cable Box BrandBrand Code You can now set up the VCR Plus+ feature pgAccess Main Menu Screen VCR Plus+ SetupChannel Number Matching Special Notes for Cable SubscribersScan 5 to place Arrow next to Guide ProcedureChannel SET, then Press CH5, Time ScanCheck Input Data Input Receiving Channel NumberConnect DSS Receiver to VCR DSS Receiver ControlDSS receiver Controller Transmitter Connected toSet DSS Receiver Output Channel Return to Custom SET ScreenTurn on DSS Receiver Enter DSS Receiver BrandSet DSS Receiver Brand Load a Cassette Simple PlaybackFind Program Start Point Start PlaybackSimple Recording Activate FRAME-BY Frame Playback Pause During PlaybackPlayback and Recording FEA Tures Still Picture/Frame-By- Frame PlaybackAdjust Manual Tracking ModeEngage Manual TrackingSelect The Soundtrack Superimpose Start Search Access Distant CodeIndex Search Manual Index Mark/EraseActivate Counter Activate Instant ReviewMemory Return to Counter Position ZeroMake Connection Tape Position IndicatorNext-Function Memory AV Compu Link PlaybackAccess Function SET Screen Activate HIGH-SPEED Search TimeScanHigh-Speed Search 7x playback Variable-Speed Search/ Reverse PlaySkip Search Skip Over Unwanted SectionsTimeScan Audio Timescan Audio byOr Time Active Video Calibration VCR takes about Seconds to assess RecordingQuality of the tape Use, then recording Begins with the picture level optimizedTape in use PlaybackReset Counter to Zero Engage TV ModeSelect Channel for Viewing Display Elapsed Time on ScreenAccess 2ND Audio Access Function SETReturn to Normal Stereo And SAP Second Audio ProgramAccess HI-FI REC Level Adjust Audio RecordING Level Access VCR PLUS+ Screen VCR Plus+ Timer ProgrammingWhen Using The Illumi-Guide Feature Enter Pluscode NumberPress TIMER. The VCR turns off automatically Engage Timer ModeCHECK/CORRECT Input Data Press SP/EPAccess Program SET Access ON-SCREENTimer Recording On-ScreenSET Program Information If you program the VCR to timerRecord a show on September On channel 40 from 1200 noon To 100 PM in SP mode,Cancel a Program Disengage TimerRE-ENGAGE Timer Check And Cancel ProgramsAccess Auto Timer Access Auto Timer ScreenAuto Timer Or, during on-screen timer programmingEngage ITR Mode Instant Timer Recording ITRSET Recording Duration Press REC on the front panelEdit To Or From Another Edit From a Camcorder Access SpecialSET RECORDER’S Input ModeSet the camcorder to its play mode Access AUX Input ScreenSet your VCR to its record mode Select InputAssemble Editing Locate Start Point SET Input ModeEngage Audio Dubbing Start DubbingLocate END Point Reset the CounterEND Insert Editing Engage Insert EditingPrepare for Editing Random As- semble EditingLoad Source Cassette CH5 or Time SCAN5Locate EDIT-OUT Point Locate EDIT-IN PointStart R.A. Edit Prepare Recording DeckTurn on the TV SET Remote Control ModeSET TV Brand Code Operate TVTurn on the Cable BOX Cable Box Multi-Brand Remote ControlEnter Cable BOX Brand Operate Cable BOXSET A/B Code Switch Unplug Vcrs PowerPlug in Power Cord Turn VCR Power onSymptom TroubleshootingCassette gets stuck partway Make sure the window side is up,Oubleshooting Timer againRe-perform the VCR Plus+ setup Doesn’t work properly When scanning channels, someResume recording Remote control won’t operate Can the VCR indefinitely remain in the still mode? Questions and AnswersCan the VCR indefinitely remain in the Record-Pause mode? What happens if the tape runs out during recording?VCR Plus+ Timer Programming MBR Multi-Brand Remote Code SettingIndex List Of TermsFront View Front Display Panel Remote Control Provided20C to 60C -4F to140F EIA monochrome signalMaximum recording time Frequency-synthesized tunerFor Servicing HOW to Locate Your JVC Service CenterLimited Warranty WarrantyMemo EMO Page HR-VP830U