JVC HR-VP830U manual CHECK/CORRECT Input Data, Engage Timer Mode, Press SP/EP

Page 45

PROGRAM 1

(VCR PLUS+ 12345678)

DATE 7/10 FRI

START 8:00 PM

STOP 9:00 PM

CHANNEL 8 SP

PRESS (8=DAILY, 9=WEEKLY SP/EP=REC SPEED)

PRESS (MENU) TO END

	SP/EP	CH	8	4
• •	• • •
•	•
• •	• •

MENU

OK

	1		2	3		5
NUMBER	4		5	6	NUMBER "9"	5
	7		8	9	NUMBER "9"
	7		8	9
			0		TIMER
			0
	NUMBER	"8"			CH	6
	NUMBER					6

	SP/EP
MENU					OK	7
MENU
				TIME SCAN
						8

45

CHECK INPUT DATA

Press OK and the Program screen appears.

The PlusCode number you entered appears in the Program screen. Check to make sure it’s accurate.

● To timer-record daily or weekly serials, press DAILY (NUMBER “8”) or

WEEKLY (NUMBER “9”). “DAILY” or “WEEKLY” appears on the Program screen.

●For weekly recording, the desired date for the day of the week must be entered.

●If you made a mistake, press CANCEL and, after pressing MENU as many times as necessary to access the VCR Plus+ screen, input the correct PlusCode number.

●If you are using the Illumi-Guide feature, MENU lights up for about 10 seconds.

SET TAPE SPEED

Press SP/EP.

CHECK/CORRECT INPUT DATA

If the data is correct as it is, go to step 7. If not, press OK or TIME SCAN ª£ until the item you want to change begins to blink. Then press the appropriate NUMBER keys, CH5° or TIME SCAN 5° to obtain the desired setting.

RETURN TO NORMAL

SCREEN

Press MENU as many times as necessary.

●Press just once to access the Auto Timer screen (☞ pg. 49).

ENGAGE TIMER MODE

Press TIMER. The VCR turns off automatically.

NOTES:

●To disengage the timer before recording starts, press TIMER again. Pressing once more re-engages it.

●In case of a power failure after programming, the VCR’s memory backup keeps your selections for approximately 10 minutes.

●When timer-recording cable channels received through a Cable Box, be sure to keep the Cable Box set to ON.

Image 45

Contents HR-VP830U Do not place the VCR Dear CustomerPower Cord Protection Power SourcesPower Lines Grounding or PolarizationDamage Requiring Service AccessoriesCleaning Replacement PartsContents Basic Connections Dual Quick Set Initial SettingsPerform Dual Quick SET Auto Clock Set/Auto Tuner SetAccess Custom SET Screen Access ON-SCREEN MenuLanguage Turn on the VCRClock PreparationOverride Auto Select Host Channel Access Select ScreensSelect Time Zone Semi-AutoSelect Mode Select D.S.T. ModeSET DATE, Time and D.S.T Make CorrectionsTuner Return to Normal Screen Perform Auto Channel SETAccess AFC Screen Access Tuner SET ScreenMake Selection Store Desired ChannelSituate Controller Cable Box ControlAttach Controller Connect Cable BOX to VCRScan 5 to place Press CH5 or TimeArrow next to Custom SET, then press OKTurn on Cable BOX Access Cable BOXBrand SET Screen Set Cable Box BrandBrand Code You can now set up the VCR Plus+ feature pgAccess Main Menu Screen VCR Plus+ SetupChannel Number Matching Special Notes for Cable SubscribersScan 5 to place Arrow next to Guide ProcedureChannel SET, then Press CH5, Time ScanCheck Input Data Input Receiving Channel NumberConnect DSS Receiver to VCR DSS Receiver ControlDSS receiver Controller Transmitter Connected toSet DSS Receiver Output Channel Return to Custom SET ScreenTurn on DSS Receiver Enter DSS Receiver BrandSet DSS Receiver Brand Load a Cassette Simple PlaybackFind Program Start Point Start PlaybackSimple Recording Activate FRAME-BY Frame Playback Pause During PlaybackPlayback and Recording FEA Tures Still Picture/Frame-By- Frame PlaybackAdjust Manual Tracking ModeEngage Manual TrackingSelect The Soundtrack Superimpose Start Search Access Distant CodeIndex Search Manual Index Mark/EraseActivate Counter Activate Instant ReviewMemory Return to Counter Position ZeroMake Connection Tape Position IndicatorNext-Function Memory AV Compu Link PlaybackAccess Function SET Screen Activate HIGH-SPEED Search TimeScanHigh-Speed Search 7x playback Variable-Speed Search/ Reverse PlaySkip Search Skip Over Unwanted SectionsTimeScan Audio Timescan Audio byOr Time Active Video Calibration VCR takes about Seconds to assess RecordingQuality of the tape Use, then recording Begins with the picture level optimizedTape in use PlaybackReset Counter to Zero Engage TV ModeSelect Channel for Viewing Display Elapsed Time on ScreenAccess 2ND Audio Access Function SETReturn to Normal Stereo And SAP Second Audio ProgramAccess HI-FI REC Level Adjust Audio RecordING Level Access VCR PLUS+ Screen VCR Plus+ Timer ProgrammingWhen Using The Illumi-Guide Feature Enter Pluscode NumberPress TIMER. The VCR turns off automatically Engage Timer ModeCHECK/CORRECT Input Data Press SP/EPAccess Program SET Access ON-SCREENTimer Recording On-ScreenSET Program Information If you program the VCR to timerRecord a show on September On channel 40 from 1200 noon To 100 PM in SP mode,Cancel a Program Disengage TimerRE-ENGAGE Timer Check And Cancel ProgramsAccess Auto Timer Access Auto Timer ScreenAuto Timer Or, during on-screen timer programmingEngage ITR Mode Instant Timer Recording ITRSET Recording Duration Press REC on the front panelEdit To Or From Another Edit From a Camcorder Access SpecialSET RECORDER’S Input ModeSet the camcorder to its play mode Access AUX Input ScreenSet your VCR to its record mode Select InputAssemble Editing Locate Start Point SET Input ModeEngage Audio Dubbing Start DubbingLocate END Point Reset the CounterEND Insert Editing Engage Insert EditingPrepare for Editing Random As- semble EditingLoad Source Cassette CH5 or Time SCAN5Locate EDIT-OUT Point Locate EDIT-IN PointStart R.A. Edit Prepare Recording DeckTurn on the TV SET Remote Control ModeSET TV Brand Code Operate TVTurn on the Cable BOX Cable Box Multi-Brand Remote ControlEnter Cable BOX Brand Operate Cable BOXSET A/B Code Switch Unplug Vcrs PowerPlug in Power Cord Turn VCR Power onSymptom TroubleshootingCassette gets stuck partway Make sure the window side is up,Oubleshooting Timer againRe-perform the VCR Plus+ setup Doesn’t work properly When scanning channels, someResume recording Remote control won’t operate Can the VCR indefinitely remain in the still mode? Questions and AnswersCan the VCR indefinitely remain in the Record-Pause mode? What happens if the tape runs out during recording?VCR Plus+ Timer Programming MBR Multi-Brand Remote Code SettingIndex List Of TermsFront View Front Display Panel Remote Control Provided20C to 60C -4F to140F EIA monochrome signalMaximum recording time Frequency-synthesized tunerFor Servicing HOW to Locate Your JVC Service CenterLimited Warranty WarrantyMemo EMO Page HR-VP830U