Contents of the Function Menu Switches | JVC SR-L910EK instruction

5	SETTING OF THE FUNCTION MENU SWITCHES
	5-2 Contents of the Function Menu Switches
Three function menu switch setting screens are available.
	[ ]: Factory setting

5 SETTING OF THE FUNCTION MENU SWITCHES
5-2 Contents of the Function Menu Switches
[	]: Factory setting

Screens

Items

Set values

Function

Screens

Items

Set values

Function

On-screen	POSITION	[L-UP]
mode setting		R-UP
		R-BOTTOM
		L-BOTTOM
		OFF
VTR mode 1	SHARPNESS	[NORMAL]
setting		SHARP
	VIDEO MODE	[AUTO]
		B/W
	AUTO REC	[OFF]
		ON
	REC CHECK	[MANUAL]
		AUTO

TAPE END	[STOP]
MODE	REW
	REPEAT
	EJECT

Sets the on-screen position of time/date and recording mode data. If no on-
screen display is required, use this menu switch to turn it off.
L-UP			: Display is shown in the top left corner of the screen.
R-UP			: Display is shown in the top right corner of the screen.
R-BOTTOM			: Display is shown in the bottom right corner of the screen.
L-BOTTOM			: Display is shown in the bottom left corner of the screen.
OFF			: The on-screen display is not shown.
Selects the picture quality in the Play mode.
NORMAL			: Normal picture quality.
SHARP			: Picture contours are emphasized.
Allows you to force Black and White recording regardless of the type of signal
input.
AUTO : Normally set to this mode. Recording automatically conforms to the
		type of signal input (Colour or Black and White).
B/W	: Even if a colour video signal is input, recording is performed in the
		Black and White mode. A higher resolution picture can be obtained
		than in the Colour mode.
Enables or disables automatic external timer recording or automatic restart of
recording after a power failure.
OFF	:	External timer recording or automatic recording after power failure is
		disabled.
ON	:	Recording starts automatically when power is turned on.
Sets whether or not Recording Check is automatically performed at the
beginning of a tape in the Repeat Recording mode. Also sets what action is
taken if picture quality is found to be defective when Recording Check is
activated with the [REC CHECK] button.
MANUAL:

•If picture quality is found to be defective when Recording Check is activated with the [REC CHECK] button, head cleaning is performed once and recording resumes. The error indication "E-09" is shown on the display for 10 seconds.

•Automatic Recording Check is not performed at the beginning of a tape set to

record repeatedly. AUTO:

•If picture quality is found to be defective when Recording Check is activated with the [REC CHECK] button, head cleaning is performed and recording resumes for several seconds, then the recording is automatically checked again. If the picture quality is still defective, head cleaning is performed again and the error indication "E-09" is shown on the display. The error indication remains displayed while recording continues.

•Automatic Recording Check is performed at the beginning of a tape set to record repeatedly.

If the picture quality is defective, Recording Check is performed again. If the picture quality is still defective, head cleaning is performed again and the error indication "E-09" is shown on the display. The error indication remains displayed while recording continues.

Sets the operation mode when the tape ends in the Record mode.
( In the Play and FF modes, the tape stops.)
STOP	: The tape stops.
REW	: The tape automatically rewinds and enters the Stop mode.
REPEAT : In the Record mode, the tape automatically rewinds and then restarts
	recording (repeat recording).
EJECT	: The tape is ejected.
The operation mode at tape end during recording, in the case
when alarm or sensor recording is executed even once, can be
set with the menu switch <TAPE END MODE> on the alarm/
sensor recording mode setting screen.

VTR mode 1	INDEX	[OFF]
setting	SEARCH	ON
	INDEX	[ALARM]
	AL/SKIP	SKIP
	TAPE END	[OFF]
	BUZZER	ON
	WARNING	[OFF]
	BUZZER	ON
VTR mode 2	SUMMER TIME	[OFF]
setting		ON
	TERMINAL	[SERIES]
	SEL 1	EXT
		C.ADJ
	TERMINAL	[WARN.]
	SEL 2	REC
	REC REMAIN	[OFF]
		180S
		360S
	NOISELESS	[OFF]
	PLAY	ON

Enables or disables the Index Search function.
OFF	: The index search function is disabled.
ON	: When an index-recorded tape is put in the FF or REW Shuttle Search
		mode, the VCR searches for the nearest recorded index code (VISS
		signal) and engages playback at the indexed position.
		When an alarm-recorded tape is fast-forwarded or rewound, the VCR
		searches for the nearest index code and enters the Stop mode at the
		indexed position.
		Select whether the index signal is to be recorded during alarm signal
		input or every hour (exact hour with no minute and second) using the
		function menu switch <INDEX ALARM/SKIP>.
Sets the timing of the recording of the index code.
ALARM : Index is recorded when the ALARM signal is input.
SKIP		: Index is recorded with 1-hour intervals.
Turns the Tape End buzzer on or off.
OFF	:	The buzzer does not sound at tape end.
ON	:	When the tape reaches the position set with the <REC REMAIN> menu
		function switch during recording (tape end, or 3 minutes or 6 minutes
		before the tape ends), a buzzer sounds.
		To stop the buzzer sound, press the [REW] button, [EJECT] button or
		[POWER] button.
		When the mode is changed, the buzzer sound stops.
Turns the warning buzzer on or off.
OFF	:	The buzzer does not sound.
ON	:	The buzzer sounds.
Turns summer time compensation on or off.
OFF	: Clock is not adjusted for summer (daylight saving) time.
ON	: Clock is adjusted for summer (daylight saving) time.
Select the signal to be input or output to the [SERIES/CLOCK IN·OUT]
terminals on the rear panel.
SERIES : Set to this position to input or output a series recording signal.
EXT		: Set to this position to start or stop the recording with the VCR
		activation signal input from an external control device.
C.ADJ		: Set to this position to input or output a clock reset signal.
Select the signal output from the rear panel’s [WARNING/REC OUT] terminal.
WARN. : Set to this position to output a warning signal. The warning signal is
		output if an abnormality occurs in tape transport or mechanism
		operation.
REC		: Set to this position to output a recording mode signal (+12 V) in the
		Record mode.
Set the tape end signal output timing. When the tape reaches the specified
position, the following signals are output.

•The tape end signal is output from the rear panel’s [TAPE END] terminal.

•The series recording signal is output from the rear panel’s [SERIES OUT] terminal (with the <TERMINAL SEL 1> function menu switch set to “SERIES”).

•The tape end buzzer sounds (with the <TAPE END BUZZER> function menu switch set to “ON”)

•“End” is shown on the counter display.

OFF.	: When the tape ends
180S.	: When the tape remaining time is about 3 minutes
360S	: When the tape remaining time is about 6 minutes

Sets the tape transport for 12H and 24H Timelapse mode.
OFF	: Linear tape transport in the 12/24H PLAY mode.
	However, the FDP display becomes L12H/L24H.
ON	: Frame tape transport in the 12/24 H PLAY mode.
	However, the FDP display becomes 12H/24H.

SETTING OF THE FUNCTION MENU SWITCHES

5-2 Contents of the Function Menu Switches

Screens

Items

Screens

Items

Set values

setting

EJECT

type of signal input (Colour or Black and White).

sensor recording mode setting screen.

: The index search function is disabled.

signal) and engages playback at the indexed position.

indexed position.

The buzzer does not sound at tape end.