JVC SR-L910EK appendix Preparation, Cassette Loading/Unloading, Date and Time Setting

5	SETTING OF THE FUNCTION MENU SWITCHES
	5-2 Contents of the Function Menu Switches
	[	]: Factory setting
	Screens	Items	Set values	Function

6 PREPARATION

6-1 Cassette Loading/Unloading

Loading

Insert the cassette with its label side facing you. Gently push the center of the cassette until the machine starts automatic loading.

[EJECT] button

VTR mode 2 setting

Alarm/sensor recording mode setting

CAMERA SW	[OFF]
	1 FIELD
	1 FRAME
CAM SW	[5 msec]
WIDTH	20 msec
ALARM REC	[OFF]
	ON

Sets the camera switching interval for output to an external sequential switcher
during recording.
OFF		: No camera switching signal is output.
1 FIELD		: Set to this position to switch the camera every 1 field.
1 FRAME: Set to this position to switch cameras every 1 frame.
Sets the output time of the camera switching signal.
5m sec		: Camera switching signal output time for 3/12/24H recording : 5 msec.
20m sec : Camera switching signal output time for 3H recording : 5 msec.
		12/24H recording : 20 msec.
Turns the alarm recording function on or off.
Alarm recording is enabled only in the Timelapse Record mode.
An index code (VISS signal) is also recorded at the start point of alarm
recording as an alarm cue signal.
OFF	: Alarm recording is disabled.
ON	: This unit enters the VHS SP Record mode, when an alarm signal is input
	to the rear panel's [ALARM IN] terminal during timelapse recording.

(	) indication	[TIMER REC] button
	TIMER indication
Note:
To avoid damage or injury, do not insert your hand or other foreign objects into the cassette loading slot.

SENSOR REC	[OFF]
	ON
TIMER ALARM	OFF
	[ON]
DURATION	5
	15
	30
	60
	120
	[180]

Turns the sensor recording function on or off. Sensor recording is enabled in
the Stop mode. An index code (VISS signal) is also recorded at the start point of
sensor recording.
OFF	: Sensor recording is disabled.
ON	: When an alarm signal is input to the rear panel's [ALARM IN] terminal in
	the Stop mode. this unit automatically starts recording in the VHS SP
	Record mode.
Sets whether or not the alarm signal input should be enabled during timer
recording.
OFF	: Alarm signal input during timer recording is disabled.
ON	: Alarm signal input during timer recording is enabled.
Selects the recording duration for alarm recording or sensor recording.
5 ..... 180 : Alarm or sensor recording is performed for the time specified (5 sec.
	to 180 sec.).
TAPE END: Alarm or sensor recording continues until the tape ends.
MANUAL : Alarm or sensor recording continues for as long as alarm signals
	are input.

Auto power on
When a cassette is loaded, the power automatically turns
on and the (	) cassette indication appears.

Unloading
5	Press the [EJECT] button.
	[ The cassette is ejected.
	If the power is not on when the [EJECT] button is
	pressed, power is automatically switched on and the
	cassette is ejected. Once the cassette is unloaded, the
	power turns off again automatically.

Auto play

When a cassette with no erasure prevention tab is loaded, playback starts automatically.

If the Timer Recording Standby mode is engaged (TIMER indication is shown on the display), the cassette will not be ejected when the [EJECT] button is pressed. To unload the cassette, press the [TIMER REC] button to release the Timer Recording Standby mode, then press the [EJECT] button.

	TAPE END
	MANUAL
BUZZER	[OFF]
	ON
TAPE END	[STOP]
MODE	REW
	REPEAT
	EJECT

		Set to this position when specifying the alarm recording time with a
		switcher.
Selects whether or not the alarm buzzer sounds during alarm or sensor
recording.
OFF	: The buzzer does not sound.
ON	: The buzzer sounds.
Set the operation mode at tape end during recording in the case when alarm or
sensor recording is executed even once.
STOP		: Stops at tape end.
REW		: Rewinds the tape automatically and stops.
REPEAT		: Rewinds the tape automatically to the beginning and restarts
		recording.
EJECT		: The tape is ejected.

6-2 Date and Time Setting
The time/date generator and timer recording will not function if the date and time are not set.
The time/date setting can be enabled on the CLOCK ADJUST menu screen or the front panel display.
			[SHIFT –] button
[OPERATE] button	[MENU] button		[SHIFT +] button
	COUNT/		SHIFT/TRACKING	RESET
	CLOCK	MENU		/CANCEL
	TIME	TIMER	SET/V.LOCK	AL/PL
	MODE	REC		RESET

RS-232C parameter setting

This screen is displayed on the on-screen setting screen only when the (optional) RS-232C board
SA-K97U is installed.
BAUD RATE	1200	Select the RS-232C data transfer speed from 1200 bps, 2400 bps, 4800 bps or
	2400	9600 bps.
	4800
	[9600]

[SET –] button [SET +] button

•Time-keeping continues even when the power cable is unplugged from the AC outlet or a power failure occurs.

•If the power cable has been unplugged for a long time of period, check the current time before using the VCR. (Time shift may occur under certain operating or environmental conditions.)

22 23