7 RECORDING
7-8 Recording with External VCR Activation Signal
7 | RECORDING |
|
|
Recording start/stop can be controlled externally by inputting a VCR activation signal to the [SERIES/CLOCK IN] terminal on the
Rear panel
To [COM] terminal | To [SERIES/CLOCK IN] terminal |
If a power failure occurs during recording, recording will restart in the same mode as soon as power is restored.
To use this function, set the function menu switch <AUTO REC> to ON.
*If this function menu switch is set to ON and power is turned off and on again in the Stop mode, the VCR enters the Record mode automatically. Be careful.
AUTO REC 
VTR MODE 1 |
|
(SHARPNESS) | NORMAL |
(VIDEO MODE) | AUTO |
(AUTO REC) | ON |
(REC CHECK) | MANUAL |
(TAPE END MODE) | REPEAT |
(INDEX SEARCH) | OFF |
(INDEX AL/SKIP) | ALARM |
(TAPE END BUZZER) | OFF |
(WARNING BUZZER) | OFF |
PRESS (SHIFT, SET) |
|
PRESS (MENU) TO END |
|
Set to ON
External control equipment
VTR mode 1 setting screen
Connection |
|
| |
VCR control signal (ground signal) | |||
|
|
| LV: 0 V |
|
|
| |
|
|
|
|
Start of recording | Stop or power off | ||
Connect the [SERIES/CLOCK IN] terminal and [COM] terminal on the
|
|
1External timer recording can be performed by connecting the | |
Check that a cassette is loaded in the VCR. | 2Set the function menu switch <AUTO REC> to ON. |
* If the cassette’s safety tab has been removed, | Power is supplied from the external timer at the |
recording will not take place. | specified time and recording starts. |
*This function does not work when the Timer Record mode is engaged.
Operation
|
When set to ON, a buzzer sounds when the tape ends |
| VTR MODE 2 | ||
| (SUMMER TIME) | OFF | |
TERMINAL | (TERMINAL SEL 1) | EXT | |
SEL 1 | (TERMINAL SEL 2) | WARN | |
(REC REMAIN)) | OFF | ||
| |||
| (NOISELESS PLAY) | OFF | |
| (CAMERA SW) | OFF | |
| (CAM SW WIDTH) | 5msec | |
| PRESS (SHIFT, SET) |
| |
| PRESS (MENU) TO | END | |
Set to EXT. (External recording function)
1 2
3
Set the function menu switch <TERMINAL SEL 1> to “EXT” to use the external recording function.
Press the MENU button to switch the
Load a cassette with a safety tab in place and engage the Stop mode, the Pause mode or turn the operating mode off.
during recording. To set the buzzer sound on, set the | ||
function menu switch <TAPE END BUZZER> to ON. | ||
5 | Select the tape end buzzer output timing with the <REC | |
| REMAIN> function switch on the VTR mode 2 setting | |
| screen. | |
| OFF | : Tape end |
| 180S | : Remaining time is about 3 minutes |
| 360S | : Remaining time is about 6 minutes |
TAPE END 
BUZZER
VTR MODE |
|
(SHARPNESS) | NORMAL |
(VIDEO MODE) | AUTO |
(AUTO REC) | ON |
(REC CHECK) | MANUAL |
(TAPE END MODE) | REPEAT |
(INDEX SEARCH) | OFF |
(INDEX AL/SKIP) | ALARM |
(TAPE END BUZZER) | ON |
(WARNING BUZZER) | OFF |
PRESS (SHIFT, SET) |
|
PRESS (MENU) TO END |
|
Set to ON
VTR mode 2 setting screen
•This function has no effect in the Timer Record Standby mode.
•If a VCR activation signal is input while the unit is already recording (started with the [REC] button), recording continues and stops when the activation signal is no longer input.
•When a VCR activation signal (ground input) is input to the rear panel’s [SERIES/CLOCK IN] terminal, recording starts automatically and continues for as long as the activation signal is input.
When the activation signal stops, the Stop or Pause mode is engaged or the operating mode is turned off (depending on the VCR status before the external recording function is used).
•When the activation signal is input again, recording starts.
| When the tape reaches the specified position, the |
| following signals are output in addition to the tape end |
| buzzer sound. |
| • Tape end signal from the rear panel's [TAPE END |
| OUT] terminal |
| • Series recording signal from the rear panel's [SERIES |
| OUT] terminal during series recording |
| • "End" indication in the counter display |
5 | To stop the buzzer sound, you can set the <TAPE END |
| BUZZER> function menu switch to OFF, turn off the |
| power, or press another operation button. |
5 | During repeat recording and AUTO REW, the buzzer |
| sounds for about 2 seconds. |
VTR mode 1 setting screen
38 | 39 |