JVC SR-L910EK appendix Controls and Connectors, Front Panel

2 CONTROLS AND CONNECTORS
2-1 Front Panel
5	4	3	2	11	12	14	1
							SR-L910E
REC	STOP/EJECT REC						OPERATE
		CHECK	VIDEO CASSETTE RECORDER
	PAUSE/		COUNT/		SHIFT/TRACKING RESET		OPE. LOCK
REVERSE STILL		PLAY		MENU
			CLOCK			/CANCEL
REW		FF	TIME	TIMER	SET/V.LOCK	AL/PL
			MODE	REC		RESET

PAL

2 CONTROLS AND CONNECTORS

2-1 Front Panel

	6	7
1	[OPERATE] button
	Press to turn the operating power ON/OFF. When this
	button is ON, the OPERATE indicator lights and the unit
	can be operated. When a cassette is inserted, the
	power switches on and the OPERATE indicator lights
	automatically.
	The OPERATE button does not completely shut off
	the mains power to the unit, but switches the
2	operating current on and off.
	Cassette loading slot
	For cassette loading and unloading. Use a VHS
3cassette tape.
	[REC CHECK] button
	Use to check recording.
	When pressed in the Record mode, this will rewind the
	tape about 4 seconds and then play back the rewound
	section so that the recording quality can be checked.
	After playback, the Record mode is automatically re-
	engaged at the point where recording was interrupted.
	• The FM level is checked during playback in Recording
	Check operation to determine whether or not picture
	quality is defective. If it is judged defective, the heads
	are automatically cleaned. How this operation is
	performed is determined by the setting of the [REC
	CHECK] switch in the function menu.
	– When set to "MANUAL":
	Head cleaning is performed once and recording
	resumes.
	– When set "AUTO":
	Head cleaning is performed once and recording is
	resumed for several seconds. Then, Recording
	Check operation is performed again.
	If picture quality is again judged defective, head
	cleaning is performed once again and "E-09" is shown
	on the display to indicate that there is a problem.
	Recording will continue, however.

8

4

5

6

9	10	13	15	16
[STOP/EJECT] button

•Stops the tape.

•Ejects the tape when pressed in the Stop mode.

[REC] button Starts recording when pressed in the Stop mode.

Operation buttons [PLAY] button Starts playback. [PAUSE/STILL] button

•Temporarily stops recording when pressed in the Record mode.

•Displays a still picture when pressed in the Play mode.

•Advances field by field when pressed in the Still mode. Pressing this button for more than 2 seconds starts

continuous field-by-field playback (slow motion). [REVERSE] button Starts reverse playback when pressed in the Play or Still mode. [FF] button

•Fast forwards the tape.

•Starts fast-forward shuttle search when pressed in the Play mode.

•If the function menu switch <INDEX SEARCH> is set to ON and an index-recorded tape is loaded, Index (alarm) Search starts in the forward direction when this button is pressed in the Stop or Play mode.

Select whether the index signal is to be recorded during alarm signal input or every hour (exact hour with no minute and second) using the function menu

switch <INDEX ALARM/SKIP>. [REW] button

•Rewinds the tape.

•Starts reverse shuttle search when pressed in the Play mode.

•If the function menu switch <INDEX SEARCH> is set to ON and an index-recorded tape is loaded, Index (alarm) Search starts in the reverse direction when this button is pressed in the Stop or Play mode.

Select whether the index signal is to be recorded during alarm signal input or every hour (exact hour with no minute and second) using the function menu switch <INDEX ALARM/SKIP>.

7Display section

8For details, refer to page 10.

[COUNT/CLOCK] button Press this button to select the time display or tape counter in the display. 9When the power is turned off, the time is displayed.

[TIME MODE] button Use to select the recording or playback time mode. Each time this button is pressed, the recording time mode changes in the following sequence. 3H (VHS SP mode) [ L12 (12-hour Timelapse mode) [ L24H (24-hour Timelapse mode) [ 3H (VHS SP mode) ....

Playback Time Mode will differ depending on how the function menu switch <NOISELESS PLAY> is set. When NOISELESS PLAY is set to OFF: 3H (VHS SP mode) [ L12 (12-hour Timelapse mode) [ L24

(24-hour Timelapse mode) [ 3H (VHS SP mode) ....

When NOISELESS PLAY is set to ON: 3H (VHS SP mode) [ 12 (12-hour Noiseless playback mode) [ 24 (24-hour Noiseless playback mode) [ 3H (VHS SP mode) ....

The selected recording/playback time mode is shown on 0the display.

[TIMER REC] button Press this button to execute the timer recording. For !details, refer to "Timer Recording" on page 28.

[MENU] button Press this button to display the date, time setting, timer program setting, various function menu setting and hour @meter. Press again to cancel the display.

[SHIFT/TRACKING +, -] buttons

•Press to select an item in date/time setting, timer program setting and function menu setting.

•Press to adjust tracking and reduce noise if there are tracking problems in the 3H (VHS SP) mode or during search.

*Tracking adjustment is not possible in the L12H and L24H Timelapse Play mode.

#

$

%

^

[SET/V. LOCK +, -] buttons

•Press to set values in date/time setting, timer program setting and function menu setting.

•Press to reduce the vertical shifting of the picture in the Still mode.

[RESET/CANCEL] button

•Normally press this button to reset the tape counter to 0000.

•When the buzzer sounds, press this button to stop the buzzer sound.

Alarm and sensor buzzer will not stop sounding.

•In the Timer Program Setting mode, press this button to cancel the program settings. For details, refer to "Timer Recording" on page 31.

[AL/PL RESET] alarm/power loss reset button Press this button to stop alarm recording or reset the alarm input or power loss data. For details, refer to page 34.

[OPE. LOCK] button Press to activate the operation lock function.

8 9