36 EN | TIMER RECORDING |
SHOWVIEW® Timer Programming
With the SHOWVIEW system, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognize.
You can use the remote control with LCD panel to enter the SHOWVIEW number.
Before performing the SHOWVIEW Timer
Programming:
●Make sure that the recorder’s
●Turn on the TV and select the AV mode.
LCD panel
1 |
|
|
|
2 |
|
|
|
1 | 2 | 3 |
|
4 | 5 | 6 | 3 |
7 | 8 | 9 | 4 |
|
|
| 4 |
| 0 |
|
|
1 |
|
| 3 |
|
|
| |
2 |
|
|
|
A Turn on the recorder.
Press 1.
B Load a cassette.
Insert a VHS (or
OR
Insert a Mini DV cassette with the erase protection switch set to “REC”.
C Select the deck.
Press VHS or DV.
D Access the SHOWVIEW display.
Press LCD PROG.
The LCD panel looks like this:
E Enter the SHOWVIEW number.
Press the number keys to enter the SHOWVIEW number of a programme you wish to record.
●If you make a mistake, press & and input the correct number. The SHOWVIEW number you enter appears on the LCD panel:
F Transmit the SHOWVIEW number.
Press to transmit the SHOWVIEW number from the remote control to the recorder.
●If the number you entered is invalid, “ERROR” appears on the TV screen and “Err” appears on the front display panel. Input a valid SHOWVIEW number.