JVC LPT0616-001A Enables Audio Dubbing later, Original recorded sound, Audio-dubbed sound, Track

Page 73

EN 73

DV MODE SET

* The default setting is bold in the table below.

8 SOUND MODE	Select the appropriate mode before recording on a Mini DV tape.
12BIT	12BIT:	Enables Audio Dubbing later.
16BIT	16BIT:	Audio Dubbing is impossible but the recorded sound quality is
		higher than “12BIT”.

8 12BIT MODE	Select the appropriate mode when playing back an audio-dubbed Mini DV tape.
SOUND1	SOUND1:	Original recorded sound
SOUND2	SOUND2:	Audio-dubbed sound
FULL SOUND	FULL SOUND:Original recorded sound and Audio-dubbed sound
	NOTES:
	● When “12BIT MODE” is set to “FULL SOUND”, both the main and sub audio will be
	audible for bilingual tapes.
	● To select only the main audio or only the sub audio of bilingual tapes, set “12BIT MODE”
	to “SOUND1”.

8 AUDIO REC	Select the appropriate mode when recording the NICAM bilingual programmes.
NICAM	NICAM:	The NICAM audio programme will be recorded on the audio
MONO	MONO:	track.
	MONO:	The Standard (monaural) audio programme will be recorded on
		the audio track.

Image 73

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel ON-SCREEN Display for DV deck Remote Control Remote Control LCD How To Use10 EN Check the contentsSituate the recorder Connect the recorder to TVAerial connector 8To connect to a TV with S-VIDEO/AUDIO in connectorsVideo Connection 12 EN Auto Set UpTurn on the recorder Select your countrySelect the language Perform Auto Set UpPress rtto select your language code Press rtto select Auto and press OK or e14 EN Perform Preset DownloadPress rtto select CH - and press OK or e Just Clock Language for the on-screen displayAccess the Country Set screen Access the Main Menu screenLanguage 16 ENSituate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connections18 EN Setting satellite receivers brand and channelNexTView Link TV Auto Power OnVCR Auto Standby Direct Rec 20 EN Basic PlaybackVHS deck Set the tape speed Choose a programmeStart recording Pause/Resume recordingSlow Motion 22 ENPause during playback Activate frame-by-frame playbackVariable Speed Search High-Speed Turbo SearchIndex Search Skip SearchNext Function Memory 24 ENRepeat Playback Activate Repeat PlaybackManual Tracking Adjust the tracking manuallySoundtrack Selection Override automatic tracking26 EN Instant Timer Recording ITRTape Remaining Time Reset the counterSet the counter display Press 0000 before starting recording or playbackRetake 28 ENReceiving Stereo and Bilingual Programmes Recording PlaybackDV deck 30 ENSelect the DV deck Press DVDV recording indicator turns off 32 EN High-Speed Turbo Search 34 EN To Record Nicam Bilingual Programmes Time Code36 EN Access the Showview displaySelect the deck Enter the Showview numberEngage the recorder’s timer mode Set the VPS/PDC modeCheck the programme data Satellite Receiver Users38 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the programme date Enter the channel positionBefore performing the 24 Hour Express Timer Programming Enter the programme mode40 EN Set the programme start/stop time and channelPage 42 EN Confirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screen44 EN Tape DubbingFrom DV to VHS Dubbing An Entire Cassette Press DV, then press SP/LP p From VHS to DV Dubbing An Entire CassetteFrom DV to VHS 46 ENLocate the start point on the VHS deck From VHS to DVPrepare the DV deck for dubbing 48 EN Recorder Video input If the camcorder has no S-VIDEO output connectorPlayer 50 EN Another Video RecorderAnother recorder RecorderPlayer Recorder Press rt to move Output/Input SetVHS F-1 Input Setting Select SettingDecoder connector Select the input mode for the Video Video connector54 EN Audio DubbingVHS Audio Dubbing DV Audio DubbingEnd Audio Dubbing Engage the Audio Dubbing modePress A.DUB Insert Editing DV Insert Editing SP mode only56 EN VHS Insert EditingAV Insert Editing VHS deck only Engage the Insert Editing modePrepare the recording cassette Start Editing58 EN Access the R.A.Edit screenSelect the programme Insert a VHS or S-VHS cassette and a Mini DV cassettePrepare the source tape Locate the end pointStart Random Assemble Editing End Random Assemble EditingSet the remote control code Change the remote control code60 EN Display the codeTV PR +/-, TV %+/- Volume, TV Muting, number keys TV Multi-Brand Remote ControlSet the TV brand code Operate the TV62 EN Satellite Receiver Multi-Brand Remote ControlSet the satellite receiver brand code Operate the satellite receiverDigital printer About DV IN/OUT connectorSimple Connections Connecting To a Satellite ReceiverDecoder Perfect Connections66 EN Select the input modeConnect the decoder Set the tunerAUX in or Tape Monitor Make connectionsAccess the Mode Set screen Mode SetSelect the mode Select the mode settingScreen. Messages appear in the selected language pg Powered back onControl, or press 7 on the recorder Recorder is turned off70 EN VHS Mode SET To record Secam signals, or play back a Mesecam tape To record PAL signals, or play back a PAL or Ntsc tape72 EN Original recorded sound Enables Audio Dubbing laterAudio-dubbed sound Full SOUNDOriginal recorded sound and Audio-dubbed soundTuner Set Access the Auto Channel Set screen74 EN Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice Manual Channel Set 76 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations a 78 ENSet Stations B Station Name TV Station And ID ListClock Set Access the Clock Set screen80 EN Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operation82 EN Showview System SetupGuide Program Number Set Guide Program NumberPower Recording 84 ENDV deck VHS deck86 EN Other ProblemsPlayback 88 EN Signal systemScan system Lines VHS Lines S-VHS Frequency range Hz to 10,000Connecting To a Printer Auto Channel Set Auto Set UpExpress Timer Programming Preset Download Random Assemble Editing90 EN Page International telephone Language code Example Francais 03 is selected for BelgiumCountry code