JVC LPT0616-001A specifications DV recording indicator turns off

Page 31

EN 31

Basic Recording

(DV deck)

Turn on the TV and select the AV mode.

1

3

2

1

2

1	2	3
4	5	6	3
7	8	9	4
			4

0

1	3
2

A Load a cassette.

Insert a Mini DV cassette with the erase protection switch set to “REC”.

●The recorder’s power comes on automatically.

B Select the DV deck.

Press DV.

●The DV button lights on the recorder.

C Choose a programme.

Press PR +/– or the number keys. Or push the JOG dial and turn it to the left or right to select the channel you wish to record.

D Set the tape speed.

Press SP/LP (p). Check the SP/LP indicator on the recorder’s front display panel to confirm the selected tape speed.

E Start recording.

Press and hold 7 and press 4 on the remote control, or press 7 on the recorder.

●The DV recording indicator lights on the recorder.

If “DIRECT REC” is set to “ON”, the programme that appears on the TV screen will be recorded ( pg. 69).

F Pause/Resume recording.

Press 9. Press 4 to resume recording.

●You can select channel during the Record Pause mode.

G Stop recording.

Press 8. Then press to remove the cassette.

●The DV recording indicator turns off.

NOTES:

●It is not possible to record a TV programme on both the VHS deck and the DV deck simultaneously. In addition, it is not possible to record simultaneously from the same external input.

●When you record a tape on the DV deck with the recording speed set to “LP”, it is recommended to play back that tape back on this DV deck. Digital video recorder from other manufacturers may not be able to play back the tape properly.

Image 31

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel ON-SCREEN Display for DV deck Remote Control Remote Control LCD How To UseConnect the recorder to TV Check the contents10 EN Situate the recorderAerial connector 8To connect to a TV with S-VIDEO/AUDIO in connectorsVideo Connection Select your country Auto Set Up12 EN Turn on the recorderPress rtto select Auto and press OK or e Perform Auto Set UpSelect the language Press rtto select your language code14 EN Perform Preset DownloadPress rtto select CH - and press OK or e Just Clock Language for the on-screen display16 EN Access the Main Menu screenAccess the Country Set screen LanguageMake connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller18 EN Setting satellite receivers brand and channelNexTView Link TV Auto Power OnVCR Auto Standby Direct Rec 20 EN Basic PlaybackVHS deck Pause/Resume recording Choose a programmeSet the tape speed Start recordingActivate frame-by-frame playback 22 ENSlow Motion Pause during playbackSkip Search High-Speed Turbo SearchVariable Speed Search Index SearchActivate Repeat Playback 24 ENNext Function Memory Repeat PlaybackOverride automatic tracking Adjust the tracking manuallyManual Tracking Soundtrack Selection26 EN Instant Timer Recording ITRPress 0000 before starting recording or playback Reset the counterTape Remaining Time Set the counter displayRetake 28 ENReceiving Stereo and Bilingual Programmes Recording PlaybackPress DV 30 ENDV deck Select the DV deckDV recording indicator turns off 32 EN High-Speed Turbo Search 34 EN To Record Nicam Bilingual Programmes Time CodeEnter the Showview number Access the Showview display36 EN Select the deckSatellite Receiver Users Set the VPS/PDC modeEngage the recorder’s timer mode Check the programme data38 EN Express Timer ProgrammingEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the programme dateSet the programme start/stop time and channel Enter the programme modeBefore performing the 24 Hour Express Timer Programming 40 ENPage 42 EN Overlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modify44 EN Tape DubbingFrom DV to VHS Dubbing An Entire Cassette Press DV, then press SP/LP p From VHS to DV Dubbing An Entire CassetteFrom DV to VHS 46 ENLocate the start point on the VHS deck From VHS to DVPrepare the DV deck for dubbing 48 EN Recorder Video input If the camcorder has no S-VIDEO output connectorPlayer 50 EN Another Video RecorderAnother recorder RecorderPlayer Recorder Press rt to move Output/Input SetSelect the input mode for the Video Video connector Select SettingVHS F-1 Input Setting Decoder connectorDV Audio Dubbing Audio Dubbing54 EN VHS Audio DubbingEnd Audio Dubbing Engage the Audio Dubbing modePress A.DUB VHS Insert Editing DV Insert Editing SP mode onlyInsert Editing 56 ENStart Editing Engage the Insert Editing modeAV Insert Editing VHS deck only Prepare the recording cassetteInsert a VHS or S-VHS cassette and a Mini DV cassette Access the R.A.Edit screen58 EN Select the programmeEnd Random Assemble Editing Locate the end pointPrepare the source tape Start Random Assemble EditingDisplay the code Change the remote control codeSet the remote control code 60 ENOperate the TV TV Multi-Brand Remote ControlTV PR +/-, TV %+/- Volume, TV Muting, number keys Set the TV brand codeOperate the satellite receiver Satellite Receiver Multi-Brand Remote Control62 EN Set the satellite receiver brand codeDigital printer About DV IN/OUT connectorSimple Connections Connecting To a Satellite ReceiverDecoder Perfect ConnectionsSet the tuner Select the input mode66 EN Connect the decoderAUX in or Tape Monitor Make connectionsSelect the mode setting Mode SetAccess the Mode Set screen Select the modeRecorder is turned off Powered back onScreen. Messages appear in the selected language pg Control, or press 7 on the recorder70 EN VHS Mode SET To record Secam signals, or play back a Mesecam tape To record PAL signals, or play back a PAL or Ntsc tape72 EN Full SOUNDOriginal recorded sound and Audio-dubbed sound Enables Audio Dubbing laterOriginal recorded sound Audio-dubbed soundAuto Channel Set Access the Auto Channel Set screenTuner Set 74 ENView the Confirmation screen Perform Auto Channel SetPress OK twice Manual Channel Set 76 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations a 78 ENSet Stations B Station Name TV Station And ID ListClock Set Access the Clock Set screen80 EN Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock dataGuide Program Number Showview System Setup82 EN Guide Program Number SetPower Recording 84 ENDV deck VHS deck86 EN Other ProblemsPlayback Lines VHS Lines S-VHS Frequency range Hz to 10,000 Signal system88 EN Scan systemPreset Download Random Assemble Editing Auto Channel Set Auto Set UpConnecting To a Printer Express Timer Programming90 EN Page International telephone Language code Example Francais 03 is selected for BelgiumCountry code