JVC LPT0678-001A Choose a programme, Set the tape speed, Start recording, Pause/Resume recording

Page 21

EN 21

Basic Recording

(VHS deck)

Turn on the TV and select the AV mode.

1

3

2

1

2

1	2	3
4	5	6	3
7	8	9	4
			4

0

1	3
2

A Load a cassette.

Insert a VHS (or S-VHS) cassette with the record safety tab intact.

●The recorder’s power comes on automatically.

B Select the VHS deck.

Press VHS.

●The VHS button lights on the recorder.

C Choose a programme.

Press PR +/– or the number keys. Or push the JOG dial and turn it to the left or right to select the channel you wish to record.

D Set the tape speed.

Press SP/LP (p). Check the SP/LP indicator on the recorder’s front display panel to confirm the selected tape speed.

E Start recording.

Press and hold 7 and press 4 on the remote control, or press 7 on the recorder.

●The VHS recording indicator lights on the recorder.

B.E.S.T. takes place at the beginning of both the first SP and the first LP recording after inserting the cassette. ( pg. 29)

If “DIRECT REC” is set to “ON”, the programme that appears on the TV screen will be recorded ( pg. 69).

F Pause/Resume recording.

Press 9. Press 4 to resume recording.

●You can select channel during the Record Pause mode.

G Stop recording.

Press 8. Then press to remove the cassette.

●The VHS recording indicator turns off.

NOTE:

It is not possible to record a TV programme on both the VHS deck and the DV deck simultaneously. However, it is possible to record simultaneously from the same external input. Set the input mode to “L-1”, “L-2” or “F-1” depending on the connectors being used. ( pg. 49, “Simultaneous Dubbing”)

Image 21

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel On the tape BeginningEnd ON-SCREEN Display for VHS deckRemote Control Remote Control LCD How To Use10 EN Check the contentsSituate the recorder Connect the recorder to TV8To connect to a TV with S-VIDEO/AUDIO in connectors Aerial connectorVideo Connection 12 EN Auto Set UpTurn on the recorder Select your countrySelect the language Perform Auto Set UpPress rt to select your language code Press rt to select Auto and press OK or ePerform Preset Download 14 ENPress rt to select CH - and press OK or e Language for the on-screen display Just Clock pg , Just Clock Access the Country Set screen Access the Main Menu screenLanguage 16 ENSituate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connections18 EN Setting satellite receivers brand and channelTV Auto Power On NexTView LinkVCR Auto Standby Direct Rec Basic Playback 20 ENVHS deck Set the tape speed Choose a programmeStart recording Pause/Resume recordingSlow Motion 22 ENPause during playback Activate frame-by-frame playbackVariable Speed Search High-Speed Turbo SearchIndex Search Skip SearchNext Function Memory 24 ENRepeat Playback Activate Repeat PlaybackManual Tracking Adjust the tracking manuallySoundtrack Selection Override automatic tracking26 EN Instant Timer Recording ITRTape Remaining Time Reset the counterSet the counter display Press 0000 before starting recording or playback28 EN RetakeReceiving Stereo and Bilingual Programmes Recording PlaybackDV deck 30 ENSelect the DV deck Press DVDV recording indicator turns off 32 EN During playback, turn the JOG dial quickly to the right For forward high-speed searchSearch, or 3 for reverse high-speed search During playback or still, press 5 for forward high-speed34 EN See Audio REC on Time Code36 EN Access the Showview displaySelect the deck Enter the Showview numberEngage the recorder’s timer mode Set the VPS/PDC modeCheck the programme data Satellite Receiver Users38 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the programme date Enter the channel positionBefore performing the 24 Hour Express Timer Programming Enter the programme mode40 EN Set the programme start/stop time and channelPage 42 EN Confirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenTape Dubbing 44 ENFrom DV to VHS Dubbing An Entire Cassette Dubbing direction indicator VHS lights From VHS to DV Dubbing An Entire CassettePress DV, then press SP/LP p From DV to VHS 46 ENFrom VHS to DV VHS playback indicator and DV recording indicator lightLocate the start point on the VHS deck Prepare the DV deck for dubbing48 EN Simultaneous Dubbing If the camcorder has no S-VIDEO output connectorRecorder Video input Player50 EN Another Video RecorderRecorder Another recorderPlayer Recorder Press rt to move Output/Input SetVHS F-1 Input Setting Select SettingDecoder connector Select the input mode for the Video Video connector54 EN Audio DubbingVHS Audio Dubbing DV Audio DubbingEngage the Audio Dubbing mode End Audio DubbingPress A.DUB Insert Editing DV Insert Editing SP mode only56 EN VHS Insert EditingAV Insert Editing VHS deck only Engage the Insert Editing modePrepare the recording cassette Start Editing58 EN Access the R.A.Edit screenSelect the programme Insert a VHS or S-VHS cassette and a Mini DV cassettePrepare the source tape Locate the end pointStart Random Assemble Editing End Random Assemble EditingSet the remote control code Change the remote control code60 EN Display the codeTV PR +/-, TV %+/- Volume, TV Muting, number keys TV Multi-Brand Remote ControlSet the TV brand code Operate the TV62 EN Satellite Receiver Multi-Brand Remote ControlSet the satellite receiver brand code Operate the satellite receiverAbout DV IN/OUT connector To DV in connectorDigital printer Pin Scart connector Mains outlet Aerial ConnectorAerialSimple Connections Outdoor unit Satellite cablePerfect Connections Aerial connector Outdoor unit Satellite cablePin Scart Decoder66 EN Select the input modeConnect the decoder Set the tunerFM tuner CD player Stereo amplifier Make connectionsAUX in or Tape Monitor Speaker TelevisionAccess the Mode Set screen Mode SetSelect the mode Select the mode settingDefault setting is bold in the table below Powered back onScreen. Messages appear in the selected language pg Control, or press 7 on the recorder70 EN VHS Mode SET To record PAL signals, or play back a PAL or Ntsc tape To record Secam signals, or play back a Mesecam tape72 EN Original recorded sound Enables Audio Dubbing laterAudio-dubbed sound Full SOUNDOriginal recorded sound and Audio-dubbed soundTuner Set Access the Auto Channel Set screen74 EN Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice TV screen moves fromManual Channel Set 76 ENDelete a Channel When Receiving a Scrambled Broadcast78 EN Set Stations aSet Stations B RTBF1 or TV Station And ID ListAccess the Clock Set screen Clock Set80 EN Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operation82 EN Showview System SetupGuide Program Number Set Guide Program NumberConnect the mains power cord No power is supplied to the recorder84 EN DV deck VHS deckTurn off the recorder once and connect 86 ENNot connected between TV Turn off the recorder or the connectedPlayback 88 EN Connecting To a Printer Auto Channel Set Auto Set UpExpress Timer Programming Preset Download Random Assemble Editing90 EN Page Example Francais 03 is selected for Belgium International telephone Language codeCountry code