JVC LPT0678-001A Enables Audio Dubbing later, Original recorded sound, Audio-dubbed sound, Track

Page 73

EN 73

DV MODE SET

* The default setting is bold in the table below.

8 SOUND MODE	Select the appropriate mode before recording on a Mini DV tape.
12BIT	12BIT:	Enables Audio Dubbing later.
16BIT	16BIT:	Audio Dubbing is impossible but the recorded sound quality is
		higher than “12BIT”.

8 12BIT MODE	Select the appropriate mode when playing back an audio-dubbed Mini DV tape.
SOUND1	SOUND1:	Original recorded sound
SOUND2	SOUND2:	Audio-dubbed sound
FULL SOUND	FULL SOUND:Original recorded sound and Audio-dubbed sound
	NOTES:
	● When “12BIT MODE” is set to “FULL SOUND”, both the main and sub audio will be
	audible for bilingual tapes.
	● To select only the main audio or only the sub audio of bilingual tapes, set “12BIT MODE”
	to “SOUND1”.

8 AUDIO REC	Select the appropriate mode when recording the NICAM bilingual programmes.
NICAM	NICAM:	The NICAM audio programme will be recorded on the audio
MONO	MONO:	track.
	MONO:	The Standard (monaural) audio programme will be recorded on
		the audio track.

8 TIME CODE	When this function is set to “ON”, the time code always appears on the TV screen
ON	while the DV deck is being selected.
OFF	When this function is set to “OFF”, the time code appears on the TV screen only by
	pressing – –:– –. ( pg. 7, 35)

Image 73

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel On the tape BeginningEnd ON-SCREEN Display for VHS deckRemote Control Remote Control LCD How To Use10 EN Check the contentsSituate the recorder Connect the recorder to TVAerial connector 8To connect to a TV with S-VIDEO/AUDIO in connectorsVideo Connection 12 EN Auto Set UpTurn on the recorder Select your countrySelect the language Perform Auto Set UpPress rt to select your language code Press rt to select Auto and press OK or e14 EN Perform Preset DownloadPress rt to select CH - and press OK or e Just Clock Language for the on-screen display pg , Just Clock Access the Country Set screen Access the Main Menu screenLanguage 16 ENSituate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connections18 EN Setting satellite receivers brand and channelNexTView Link TV Auto Power OnVCR Auto Standby Direct Rec 20 EN Basic PlaybackVHS deck Set the tape speed Choose a programmeStart recording Pause/Resume recordingSlow Motion 22 ENPause during playback Activate frame-by-frame playbackVariable Speed Search High-Speed Turbo SearchIndex Search Skip SearchNext Function Memory 24 ENRepeat Playback Activate Repeat PlaybackManual Tracking Adjust the tracking manuallySoundtrack Selection Override automatic tracking26 EN Instant Timer Recording ITRTape Remaining Time Reset the counterSet the counter display Press 0000 before starting recording or playbackRetake 28 ENReceiving Stereo and Bilingual Programmes Recording PlaybackDV deck 30 ENSelect the DV deck Press DVDV recording indicator turns off 32 EN During playback, turn the JOG dial quickly to the right For forward high-speed searchSearch, or 3 for reverse high-speed search During playback or still, press 5 for forward high-speed34 EN See Audio REC on Time Code36 EN Access the Showview displaySelect the deck Enter the Showview numberEngage the recorder’s timer mode Set the VPS/PDC modeCheck the programme data Satellite Receiver Users38 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the programme date Enter the channel positionBefore performing the 24 Hour Express Timer Programming Enter the programme mode40 EN Set the programme start/stop time and channelPage 42 EN Confirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screen44 EN Tape DubbingFrom DV to VHS Dubbing An Entire Cassette From VHS to DV Dubbing An Entire Cassette Dubbing direction indicator VHS lightsPress DV, then press SP/LP p From DV to VHS 46 ENFrom VHS to DV VHS playback indicator and DV recording indicator lightLocate the start point on the VHS deck Prepare the DV deck for dubbing48 EN Simultaneous Dubbing If the camcorder has no S-VIDEO output connectorRecorder Video input Player50 EN Another Video RecorderAnother recorder RecorderPlayer Recorder Press rt to move Output/Input SetVHS F-1 Input Setting Select SettingDecoder connector Select the input mode for the Video Video connector54 EN Audio DubbingVHS Audio Dubbing DV Audio DubbingEnd Audio Dubbing Engage the Audio Dubbing modePress A.DUB Insert Editing DV Insert Editing SP mode only56 EN VHS Insert EditingAV Insert Editing VHS deck only Engage the Insert Editing modePrepare the recording cassette Start Editing58 EN Access the R.A.Edit screenSelect the programme Insert a VHS or S-VHS cassette and a Mini DV cassettePrepare the source tape Locate the end pointStart Random Assemble Editing End Random Assemble EditingSet the remote control code Change the remote control code60 EN Display the codeTV PR +/-, TV %+/- Volume, TV Muting, number keys TV Multi-Brand Remote ControlSet the TV brand code Operate the TV62 EN Satellite Receiver Multi-Brand Remote ControlSet the satellite receiver brand code Operate the satellite receiverTo DV in connector About DV IN/OUT connectorDigital printer Pin Scart connector Mains outlet Aerial ConnectorAerialSimple Connections Outdoor unit Satellite cablePerfect Connections Aerial connector Outdoor unit Satellite cablePin Scart Decoder66 EN Select the input modeConnect the decoder Set the tunerFM tuner CD player Stereo amplifier Make connectionsAUX in or Tape Monitor Speaker TelevisionAccess the Mode Set screen Mode SetSelect the mode Select the mode settingDefault setting is bold in the table below Powered back onScreen. Messages appear in the selected language pg Control, or press 7 on the recorder70 EN VHS Mode SET To record Secam signals, or play back a Mesecam tape To record PAL signals, or play back a PAL or Ntsc tape72 EN Original recorded sound Enables Audio Dubbing laterAudio-dubbed sound Full SOUNDOriginal recorded sound and Audio-dubbed soundTuner Set Access the Auto Channel Set screen74 EN Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice TV screen moves fromManual Channel Set 76 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations a 78 ENSet Stations B RTBF1 or TV Station And ID ListClock Set Access the Clock Set screen80 EN Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operation82 EN Showview System SetupGuide Program Number Set Guide Program NumberConnect the mains power cord No power is supplied to the recorder84 EN DV deck VHS deckTurn off the recorder once and connect 86 ENNot connected between TV Turn off the recorder or the connectedPlayback 88 EN Connecting To a Printer Auto Channel Set Auto Set UpExpress Timer Programming Preset Download Random Assemble Editing90 EN Page International telephone Language code Example Francais 03 is selected for BelgiumCountry code