JVC LPT0678-001A For forward high-speed search, Search, or 3 for reverse high-speed search

JOG dial

EN 33

High-Speed (Turbo) Search

For forward high-speed search

During playback, turn the JOG dial quickly to the right.

For reverse high-speed search (refer to the JOG dial illustration)

During playback, turn the JOG dial one or two click to the right (➀), and then turn it quickly to the left (➁).

●Reverse high-speed search may not be activated when turning the JOG dial directly to the left during normal playback.

OR

During playback or still, press 5 for forward high-speed

search, or 3 for reverse high-speed search.

NOTE:

For short searches, press and hold 5 or 3 for over 2 seconds during playback or still picture. When released, normal playback resumes.

Variable Speed Search

During playback, turn the JOG dial to the right for forward variable-speed search, or to the left for reverse variable-speed search.

OR

During playback, press w or e.

●The more times you press, the faster the playback picture moves.

●To decrease speed, press the button for the opposite direction.

To resume normal playback, press 4.

Next Function Memory

The Next Function Memory “tells” the recorder what to do after rewinding. Before continuing, make sure the recorder is in the Stop mode.

a- For Automatic Start Of Playback

Press 3, then press 4 within 2 seconds. b- For Automatic Power Off

Press 3, then press 1 within 2 seconds.

c- For Automatic Cassette Ejection After Tape Rewind Press 3, then press within 2 seconds.

NOTE:

The Automatic Power Off does not work if “AUTO TIMER” is set to “ON” and if any timer programming has been made. If “AUTO TIMER” is set to “ON”, the recorder directly goes into the Timer-Standby mode at the same time when the 1 is pressed for the Automatic Power Off.

Soundtrack Selection

Your recorder is capable of recording two soundtracks (L and R) and will play back the one you select.

During Playback

Pressing AUDIO changes the soundtrack as follows:

TRACK	USE
On-Screen Display
LjhR	For stereo or Bilingual tapes
Lj	For main audio of Bilingual tapes
hR	For sub audio of Bilingual tapes

NOTES:

●For instructions on recording stereo and bilingual programmes, refer to page 35.

●“O.S.D.” must be set to “ON” or the on-screen displays will not appear ( pg. 69).