JVC LPT0678-001A specifications Express Timer Programming, 38 EN

38 EN TIMER RECORDING (cont.)

Express Timer

Programming

If you do not know the SHOWVIEW number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme.

Before performing Express Timer Programming:

●Make sure that the recorder’s built-in clock is set properly.

●Turn on the TV and select the AV mode.

1
2
1	2	3
4	5	6	3
7	8	9	4
			4
	0
1			3
2

A Turn on the recorder.

Press 1.

B Load a cassette.

Insert a VHS (or S-VHS) cassette with the record safety tab intact.

OR

Insert a Mini DV cassette with the erase protection switch set to “REC”.

C Select the deck.

Press VHS or DV.

D Access the SHOWVIEW screen.

Press PROG.

E Access the Programme screen.

Press START+/–. (If you’re just starting out, “P1” appears.)

The front display panel looks like this:

F Enter the programme start time.

Press START+/– to enter the time you want recording to start.

●Press and hold START+/– to

move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

The front display panel looks like this:

G Enter the programme stop time.

Press STOP+/– to enter the time you want recording to stop.

●Press and hold STOP+/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.