18 EN | INITIAL SETTINGS (cont.) |
Setting clock semiautomatically
— Semiauto Clock Set
You can change the host channel/D.S.T. /time zone setting manually.
First follow steps A to B on page 17, then go to the following steps.
CAccess Auto Clock Set screen
ESelect D.S.T. mode
You have three choices:
“AUTO”– Select if you want to adjust your VCR’s clock automatically by the incoming signal from the host channel. (Auto Daylight Saving Time*)
“ON”– Adjustment will be made by the built- in clock itself.
“OFF”– Select when Daylight Saving Time does not apply to you.
Press [FG] to move the arrow to “AUTO CLOCK SET”, then press [OK].
FUNCTION SET UP |
| TUNER SET UP | INITIAL SET UP | ||
CLOCK SET |
|
| GUIDE CHANNEL | OTHER | |
AUTO CLOCK SET |
|
| |||
MANUAL CLOCK SET |
|
| |||
AUTO CLOCK |
| ON | |||
MENU | OK |
| SELECT WITH ARROW KEYS | ||
EXIT | SELECT | THEN PRESS [OK] | |||
|
|
| |||
Press [FG] to move the arrow to “D.S.T.”, then press [D E] repeatedly until the desired setting is selected.
FSelect time zone
Press [FG] to move the arrow to “TIME ZONE”, press [D E] repeatedly until “AUTO” or the
Then;
To select the host channel — go to step D. To select the D.S.T. mode — go to step E. To select the time zone — go to step F.
NOTE:
The time set previously will be erased when “AUTO CLOCK SET” is selected.
DSelect host channel
desired time zone is selected.
Each time you press the button, the time zone changes as follows:
U“AUTO” U “ATLANTIC” U “EASTERN”
U “CENTRAL” U “MOUNTAIN” U “PACIFIC” U “ALASKA” U “HAWAII” U (back to the beginning)
NOTE:
If an incorrect clock time is displayed by the Plug & Play setting, you may be receiving the clock setting data of a
You can either select “AUTO” or enter a PBS channel number. Press [FG] to move the arrow to “HOST CH”, then press [D E] until “AUTO” or the desired PBS channel number is selected.
FUNCTION SET UP | TUNER SET UP | INITIAL SET UP | |
AUTO CLOCK SET | TIME | : AM DATE 1/1 (THU) 2004 | |
HOST CH | [TV] | AUTO | |
D.S.T |
| AUTO | |
TIME ZONE |
| AUTO | |
RETURN |
|
| |
MENU | OK | SELECT WITH ARROW KEYS | |
EXIT | SELECT | THEN PRESS [OK] | |
|
| ||
PBS channel from an adjacent time zone or from an incorrect PBS channel from a cable TV system. If you selected “AUTO” for the host channel in step D, be sure to select the correct time zone manually.
GReturn to normal screen
Press [MENU].
IMPORTANT:
NOTE:
Some PBS channels do not transmit clock setting data.
* Auto Daylight Saving Time
This function enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
.. . on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM.
.. . on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.
Turn off the VCR after performing Semiauto Clock Set. [AUTO] will appear on the front display panel while the clock is being set. The current clock time will appear automatically when the clock setting is complete.