Engage recording standby mode
Press [POWER] to turn off the VCR.
• The Integrated HDTV will activate the VCR to automatically start recording through the Video Remote Controller at the programmed time.
E
• For timer programming method, refer to the manual of the Integrated HDTV.
Press [REC SPEED] to set the recording speed.
Set recording speed
C
D Set timer program on the Inte- grated HDTV
Select analog input location on the VCR
On the front panel:
Press [CHANNEL +] or [–] to select “L-1” etc.
On the Remote:
a– Press [TV/VCR CH +] or [–] to select “L-1” etc. or
b– Press the ‘Number’ key [0(AUX)].
B
Load a cassette
Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette.
A
EN 49
This VCR can perform analog recording of a program which is timer-programmed on your Integrated HDTV (or Digital Set Top Box).
Video Remote
Control Timer
Programming
•Turn on the VCR and the TV (and/or Digital Set Top Box).
•Set the [VCR/TV/CABLE/DBS] selector on the Remote to [VCR].
E | A | B |
C
E
VCR CABLE
TV /DBS
B- a
C
B- b
[AUX]