JVC HM-DH5U Tuner Setting, 20 EN, Setting channels automatically, Access Tuner Set Up screen

20 EN INITIAL SETTING (cont.)

Tuner Setting

•Turn on the VCR and the TV, and select the AV mode on the TV.

•Set the [VCR/TV/CABLE/DBS] selector on the Remote to [VCR].

Setting channels automatically

— Auto Channel Set

Use Auto Channel Set only if channels have not been set correctly by the Plug & Play setting. If you want to add or delete channels, use Manual Channel Set (A page 21).

AAccess Main Menu screen

Press [MENU].

BAccess Tuner Set Up screen

VCR CABLE TV /DBS

APress [D E] to move the arrow to “TUNER SET UP”, then press [G] or

[OK].

BPress [D E] to move the arrow to “TUNER SET”, then press [G] or [OK].

FUNCTION SET UP		TUNER SET UP		INITIAL SET UP
TUNER SET			CABLE SET UP		DBS SET UP
	BAND			TV
	AUTO CH SET
	MANUAL CH SET
MENU	OK		SELECT WITH ARROW KEYS
EXIT	SELECT		THEN PRESS [OK]

CPerform Auto Channel Set

A D

B - C

You can automatically set the receivable channels in your area in the order of their frequencies.

Press [FG] to move the arrow to “AUTO CH SET”, then press [OK].

FUNCTION SET UP		TUNER SET UP		INITIAL SET UP
TUNER SET			CABLE SET UP		DBS SET UP
	BAND			TV
	AUTO CH SET
	MANUAL CH SET
MENU	OK		SELECT WITH ARROW KEYS
EXIT	SELECT		THEN PRESS [OK]

NOTES:

•When Auto Channel Set is complete,

“SCAN COMPLETED” appears on screen.

•If the scan was unsuccessful, “SCAN

COMPLETED – NO SIGNAL FOUND –” appears on screen.

Check the connections, then select “RETRY” to start again, or select “EXIT”.

FUNCTION SET UP	TUNER SET UP	INITIAL SET UP
TUNER SET	CABLE SET UP		DBS SET UP

		AUTO CHANNEL SET
			SCANNING...
		PRESS [MENU] TO END
MENU	OK		SELECT WITH ARROW KEYS
EXIT	SELECT		THEN PRESS [OK]

DReturn to normal screen

Press [MENU].

INFORMATION

The VCR selects the correct band (TV or CATV) automatically during Auto Channel Set.

The selected band will be displayed on the right side of “BAND” on the Tuner Set Up screen.