JVC HM-DH5U Select video input terminal, Set Picture Control to, VHS HS, STD, LS3, Vhs/Vhs Sp, Ep

Page 75

EN 75

BConnection with the VCR

Connect an audio/S-video cable between the playback VCR’s audio/S-video output connectors and the recording VCR’s [AUDIO/ S VIDEO INPUT] connectors.

•When using this VCR as the recording VCR, connect this VCR’s [AUDIO/S VIDEO INPUT] connectors to the audio/S-video output connectors on the other VCR.

If the playback VCR is monaural, connect the audio output connector on the playback VCR to the [AUDIO L INPUT] connector on this VCR.

NOTE:

If another VCR does not have S-video input/output connectors, use a video cable.

BLoad a cassette

Insert the cassette to be recorded on into this VCR (for recording).

CSelect input location on this VCR

[L-1] or [L-2] — when connecting the device to the [AUDIO/VIDEO INPUT] or

[AUDIO/S VIDEO INPUT] connectors on the rear panel.

[F-1]— when connecting the device to the [AUDIO/VIDEO] or [AUDIO/S VIDEO] input connectors on the front panel.

On the front panel:

Press [CHANNEL +/–].

On the Remote:

Press the ‘Number’ key [0 (AUX)] or [TV/VCR CH +/–].

NOTE:

When using this VCR as the recording VCR, set the video input terminal setting correctly. This setting selects either the S-Video or composite video (A page 65).

DSet recording speed

Press [REC SPEED] to set the tape speed.

Input Source

Selectable Recording Speed

(Playback device)

(Recording device: This VCR)

 

 

 

Analog

D-VHS

HS, STD, LS3

input

S-VHS/VHS

SP, EP

 

 

 

ESelect video input terminal

Access the “IN/OUT FUNCTION” screen (A page 65).

When using [S VIDEO] terminal, set “FRONT AUX F-1” (or “REAR AUX L-1” (or “L-2”) if you use the connectors on the rear) to “S-VIDEO”.When using [VIDEO] terminal, set “FRONT AUX F-1” (or “REAR AUX L-1” (or “L-2”) if you use the connectors on the rear) to “VIDEO”.

FSet “PICTURE CONTROL” to

“EDIT”

Access the “VIDEO FUNCTION” screen (A page 63).

GStart playback

Press [PLAY (I)] on the connected device.

NOTE:

If the connected device is equipped with a superimpose/ OSD disable feature then set it to “OFF” before starting playback.

HStart recording

On the front panel:

Press [REC (R)].

On the Remote:

Press [REC (R)] and [PLAY (I)] at the same time.

To use a Master Edit Control-equipped JVC camcorder

AAccess the “ADDITIONAL” screen (A page 66), then set “AV COMPU-LINK” to “OFF” after per- forming step F.

•The REMOTE PAUSE/AV COMPULINK connector works as a Remote Pause connector when “AV COMPU-LINK” is set to “OFF”.

•For details, refer to the camcorder’s instruction manual.

BEngage the VCR’s recording pause mode.

NOTES:

•Be sure to select “AUTO” for “PICTURE CONTROL” (or

“NORM” when “V. CALIBRATION” is set to “OFF”) after you finish dubbing the tapes (A page 63).

•It is impossible to perform dubbing properly only with an audio cable. Connect also the video or S-video cable.

Page 74 Page 76
Image 75
Page 74 Page 76
Contents HM-DH5U Dear Customer CDGAntenna Installation Instructions InstallationBefore YOU Install Your NEW VCR USEServicing Do not expose the apparatus to dripping or splashing About Head CleaningSymptoms of dirty video heads Do not block the VCR’s ventilation openings or holesContents C E F Front panelVHF/UHF Rear panelAbcd Front display panelAudio StereoStream PCMRemote How to use the Remote12 EN ConnectionsBasic Connection 14 EN Component Video Connection Digital Set Top Box ConnectionBox Hdmi ConnectionAuto Clock Set/Auto Tuner Set Plug & Play SettingPerform Plug & Play setup 16 ENPreparations Clock SettingAccess Main Menu screen Access Clock Set screenSelect host channel Access Auto Clock Set screen Select D.S.T. mode18 EN Select time zoneSetting clock manually 20 EN Tuner SettingSetting channels automatically Access Tuner Set Up screenManual Channel Set Setting channels manuallyAccess Manual Channel Set screen Add or skip desired channelsCable Box Control Setting Installing Controller22 EN Select cable box input channel Setting cable box input channel & brandAccess Cable Set Up screen Turn on cable boxBrand Code Engage test mode24 EN Enter cable box brandConnect DBS receiver to VCR DBS Receiver Control SettingIf your DBS receiver has audio/video output connectors How to control the DBS receiverTurn on DBS receiver Setting DBS receiver input channel & brandAccess DBS Receiver Set screen 26 ENJVC Dish Network Echostar Dish Network Enter DBS Receiver’s brandPress FG to move the arrow to Brand Brand CodeStart playback Basic Playback28 EN Load a cassetteYou can play back a tape repeatedly 50 times FeaturesChecking tape position Playing back tape repeatedlyActivate manual tracking Adjusting tracking condition30 EN Selecting monitor soundStart search Access distant codeAutomatic operations after rewinding Skipping unwanted portionsSubtitle Selection 32 ENProgram Selection Angle SelectionYou can change the speed of picture search Special Effect PlaybackLocating particular scene rapidly To resume normal playback, press PlayViewing slow motion picture 34 ENViewing still picture Viewing still picture frame by frameStart recording Basic RecordingLoad a D-VHS cassette Set recording speed36 EN VHS/S-VHS/VHS RecordingSelect recording channel Specifying recording length Basic Recording FeaturesRecord X indicator starts flashing Changing display information38 EN Watching one program while recording anotherShowing on-screen display Second Audio Recording a VHS Recording Mode aOther useful functions for recording Calibration S-VHS/VHS only aEnter PlusCode number VCR Plus+ C3 Timer ProgrammingAccess VCR Plus+ screen 40 ENEngage timer recording standby Mode To use the VCR while it is in timer recording standby modeCheck program data Return to normal screen Changing VCR Plus+ C3 Setting 42 ENVCR Plus+ guide channel matching You have properly Access Main Menu screen Input receiving channel numberAccess Guide Channel Set screen Return to normal screen Input guide channel number44 EN Express Timer ProgrammingTo timer-record daily or weekly serials Canceling or changing program settings Checking program settings46 EN Satellite Auto Recording Set timer program on DBS receiverEngage Satellite Auto Recording Standby mode Make sure the record safety tab is intact48 EN Link Timer ProgrammingSet timer program on the Inte- grated Hdtv source Engage recording standby modeVideo Remote Control Timer Programming 50 EN Other Useful functions for timer recordingAuto Timer a Auto SP N EP Timer S-VHS/VHS only aPress Navi Access Video Navigation screenNavigation Playback Select programDeactivating Video Navigation Access Video Navigation screenAccess Navigation Set Up screen 52 ENFinding by tape number Access Library screenAccess tape number list screen Finding TapesConfirm lists 54 ENFinding by program title Finding by categoryFinding by recording date Finding blank space 56 ENEditing tape title Editing TitlesNumber KEY Characters Access edit screen58 EN Enter titleEntering or Editing program title Load a cassetteSelect program 60 EN Editing program categoryDeleting tape information Check memory Deleting program informationChecking memory Delete program information62 EN Useful Function SettingsVideo settings Video Function 2ND Audio REC Audio settings Audio Function64 EN ModeInput/Output settings IN/OUT Function 66 EN Additional settings AdditionalLink Set to on 68 ENJlip ID Number Setting Select Jlip ID Set Up screenSet Jlip ID Number 70 EN Link Set UpAccess i.LINK Set Up screen Confirm Linc settingLink Connection Examples What is i.LINK?Link Connection Link Branched Connection72 EN LINK/DV ConnectionsConnection with the VCR Make connectionsSelect input location on this VCR Connection with the camcorder74 EN VIDEO/VIDEO ConnectionsVHS/VHS SP, EP Select video input terminalSet Picture Control to VHS HS, STD, LS376 EN TV Brand SettingOperate cable box or DBS Receiver Cable Box or DBS Receiver Brand SettingTurn on the cable box or DBS Receiver Enter brand codeTurn off VCR Changing Remote Control CodeSet remote control code for Remote 78 ENSymptom Possible Cause Corrective Action VCR 80 ENAgain Cable Set Up screen and selectBlinks on the front display There are no programs in memory82 EN Image or sound is distorted Playback of tapes recorded in D-VHS modeSearching images on D-VHS tapes Picture stops/There is no soundError Codes and Messages 84 ENCode Message Description This Program Video Signal is not Found forContent is not Acceptable INST.BOOKPlayback Questions and answersTimer Recording 86 ENHdmi GlossaryDTS HdcpList of terms 88 ENGeneral TimerConnectors AccessoriesWhat WE will do What YOU Must do for Warranty ServiceWhat is not Covered 90 ENMemo Toll Free 1 800 Remember to retain your Bill of Sale for Warranty Service
Related manuals
Manual 92 pages 2.43 Kb
Top Page Image Contents