JVC HM-DH5U manual Setting cable box input channel & brand, Turn on cable box

EN 23

•Turn on the VCR and the TV, and select the AV mode on the TV.

•Set the [VCR/TV/CABLE/DBS] selector on the Remote to [VCR].

VCR CABLE

TV /DBS

Setting cable box input channel & brand

After installation, set the cable box input channel and its brand correctly; otherwise, the Controller cannot work correctly.

ATurn on cable box

Select a channel other than channel 9 on your cable box.

BAccess Main Menu screen on VCR

Press [MENU].

CAccess Cable Set Up screen

B G

C - F

APress [D E] to move the arrow to “TUNER SET UP”, then press [G] or [OK].

BPress [D E] to move the arrow to “CABLE SET UP”, then press [G] or [OK].

FUNCTION SET UP	TUNER SET UP		INITIAL SET UP
TUNER SET		CABLE SET UP		DBS SET UP
INPUT CH				OFF
BRAND				1
TEST MODE
MENU	OK	SELECT WITH ARROW KEYS
EXIT	SELECT	THEN PRESS [OK]

DSelect cable box input channel

Press [FG] to move the arrow to “INPUT CH”.

Your selection depends on how your cable box is connected to your VCR.

FUNCTION SET UP	TUNER SET UP		INITIAL SET UP
CABLE SET UP
INPUT CH			OFF
BRAND			1
TEST MODE
MENU	OK	SELECT WITH ARROW KEYS
EXIT	SELECT	THEN PRESS [OK]

•If your cable box is connected to your VCR’s [ANTENNA IN] terminal on the rear panel Press [D E] until the channel number representing the cable box’s output (“ON CH2 – ON CH9”) appears on the screen.

•If your cable box is connected to your VCR’s [AUDIO/VIDEO] input connectors on the front panel

Press [D E] until “ON F-1” appears on the screen.

•If your cable box is connected to your VCR’s [AUDIO/VIDEO INPUT (L-1)] or [AUDIO/ VIDEO INPUT (L-2)] connectors on the rear panel

Press [D E] until “ON L-1” or “ON L-2” appears on the screen.

•If you do not use a cable box

Press [D E] until “OFF” appears on the screen.