JVC BR-DV3000E Special playback, Locate function, Variable speed playback, Index search

PLAYBACK	– Special playback – (continued)
Variable speed playback

PLAYBACK	– Locate function –
Index search

Use the remote controller.
( )	SEARCH +/( )	(	)

Set the unit to the search mode.

This function locates and advances/rewinds to the position where the index signal is recorded.

Use the remote controller.

button button		button
DISPLAY
BARS	STILL	BLANK
	MODE
		AUDIO
MENU	SEARCH+	MUTING
		OUT SEL.
	SET
	SEARCH–	OUT LEV.
A.DUB	PAUSE	REC
F.REV		F.ADV
	PLAY
REW		FF
	STOP
INDEX–		INDEX+
REMOTE CONTROL UNIT
	RM-G3000

The main unit button can also be used to set the unit to the
search mode.
1.	Set the unit to the PLAYBACK or the STILL mode.
2.	Press the FF button to execute fast-forward playback.
	Press the REW button to execute reverse playback.
The search speed changes according to the following
sequence each time the FF or REW button is pressed:
	X20¥X5¥X9¥X20
In DVCAM mode, the maximum speed is 15X.
Changing the speed of fast-forward playback or re-
verse playback:
During normal playback or forward search:
If the SEARCH +		
		(	) buttons are pressed, the playback speed in-
creases.
If the SEARCH –			) buttons are pressed, the playback speed de-
		(
creases.
During reverse playback or reverse search:
If the SEARCH + () buttons are pressed, the playback speed de-

A.DUB PAUSE	REC
F.REV	F.ADV
PLAY
REW	FF
STOP
INDEX–	INDEX+
REMOTE CONTROL UNIT
RM-G3000

INDEX –	INDEX +
button	button
Monitor screen
INDEX+1

To locate an index in the forward direction vis-a-vis the current tape position:

•Press the INDEX + button.

The index position to be located can be specified by the number of times this button is pressed. (Max: 99)

To locate an index in the reverse direction vis-a-vis the current tape position:

•Press the INDEX - button.

The index position to be located can be specified by the number of times this button is pressed. (Max: 99)

When the INDEX + or INDEX - button is pressed, the unit will fast-forward or rewind to the specified indexed po- sition and start playing.

Memo

• If the interval between index signals is less than 1 minute, the function may not work well. • The specifications for index signal recording varies with the device used.

REW	FF
button	button
SEARCH – /(	)
button
Memo

creases.
If the SEARCH – (	
	) buttons are pressed, the playback speed in-
creases.
The variable playback speed changes as follows in the forward and
reverse direction.
0¥0.1¥0.33¥0.5¥1¥2¥5¥9¥20X speed
(Still)
* 0.1 X speed indicates step slow playback (continuous frame advance).

During index search, this message is displayed on the monitor (the number represents the position of the index).

Blank search This function locates the unrecorded parts of the tape. Use the remote controller.

•The A. OUT AT SEARCH item of the AUDIO/VIDEO menu can be set to turn on/ off audio output during the search mode.

•If 0.1 X speed playback (step slow) has been continued for about 40 seconds, the unit will automatically change to the 0.2 X speed playback (linear slow) in order to pro- tect the tape.

If the SEARCH + (	
	) buttons are pressed, the tape will play in the
forward direction.
If the SEARCH – (	
	) buttons are pressed, the tape will play in the
reverse direction.
Changing the direction of playback

To change from normal or fast-forward playback to re- verse playback:

•Press the p ( ) button.

If this button is pressed during playback, reverse playback will be engaged.

To change from reverse or rewind playback to forward

	BLANK button
DISPLAY
BARS	STILL	BLANK
	MODE
		AUDIO
MENU	SEARCH+	MUTING
		OUT SEL.
Monitor screen

In the STOP mode, press the BLANK button.

¥• If the current position is at a recorded part of the tape, the unit fast-forwards until an unrecorded part is reached and goes into the STOP mode.

•If the current position of the tape is unrecorded, the unit will first advance the tape in the forward direction for confirmation and thereafter rewind and go into the STILL mode at the last recorded position.

•During a blank search, “BLANK SEARCH” is displayed on the monitor.

46

playback:
• Press the P (	) button.
If this button is pressed during reverse playback, normal playback
will be engaged.
If this button is pressed during rewind playback, fast-forward play-
back will be engaged.

BLANK SEARCH

47