MENU SCREEN | – Contents of the menus – | ||
In the menu descriptions below, settings with “” marks are factory settings. | |||
TOP MENU |
|
|
|
Items | Setting |
| Contents |
SYSTEM |
| Displays the menus related to the operation system of this unit. | |
REMOTE |
| Displays the menus related to the remote controller. | |
AUDIO/VIDEO |
| Displays the menus related to the audio and video. | |
TIME CODE |
| Displays the menu for setting time codes. | |
DISPLAY |
| Displays the menu related to the displays on the monitor connected | |
|
| to the VIDEO LINE OUT or Y/C OUT terminal. | |
CLOCK ADJUST |
| Displays the menu for setting date/time. | |
|
| For information on the setting method, please refer to page 31 | |
|
| “Setting date/time”. | |
FACTORY | CANCEL | Sets whether to return the values on the menu to those initially set | |
SETTING | EXECUTE | at manufacture. | |
|
| CANCEL | : Do not use the factory settings |
|
| EXECUTE | : Use the factory settings |
DRUM HOUR |
| Displays the drum usage time. | |
METER |
| *The cursor cannot be moved to this item. | |
EXIT |
| Return to the usual screen. |
SYSTEM Menu The SYSTEM menu consists of the following 2 screens. (1/2 and 2/2 menu)
SYSTEM (1/2) menu
Items | Setting |
|
|
| Contents | |
STL/F.ADV | FIELD | Use this item to select the still image type during the STILL mode | ||||
MODE | 1st | or frame advance playback. |
| |||
| 2nd | FIELD |
| : Displays field image. During frame advance playback, | ||
| FRAME |
|
| 1st and 2nd field images are displayed alternately. | ||
|
| 1st |
| : displays the 1st field image. | ||
|
| 2nd |
| : displays the 2nd field image. | ||
|
| FRAME | : displays the frame image. | |||
|
| Memo |
|
|
| |
|
| The image type for the STILL mode can also be selected with the | ||||
|
| STILL MODE button on the wireless remote controller. | ||||
BACKUP REC | OFF | Set this item according to the recording time of the source tape | ||||
TIME | 25MIN | during DV signal input backup recording. | ||||
| 55MIN | OFF |
| : No backup recording. | ||
| 75MIN | 25MIN |
| : Use this setting if the recording time of the source tape | ||
| 115MIN |
|
| is 30 mins |
|
|
| 175MIN | 55MIN |
| : Use this setting if the recording time of the source tape | ||
| 265MIN |
|
| is 60 mins |
|
|
|
| 75MIN |
| : Use this setting if the recording time of the source tape | ||
|
|
|
| is 80 mins |
|
|
|
| 115MIN | : Use this setting if the recording time of the source tape | |||
|
|
|
| is 120 mins |
| |
|
| 175MIN | : Use this setting if the recording time of the source tape | |||
|
|
|
| is 180 mins |
| |
|
| 265MIN | : Use this setting if the recording time of the source tape | |||
|
|
|
| is 270 mins |
| |
|
| ☞ Page 40 “Backup recording function” | ||||
LONG PAUSE | 30SEC | Sets the interval after the lapse of which the tape protection mode | ||||
TIME | 1MIN | will be engaged during an extended STILL mode, STOP mode or | ||||
| 2MIN | recording pause. The setting for the STILL mode can be made via | ||||
| 3MIN | the LONG PAUSE MODE menu item. | ||||
| 5MIN | 30SEC: 30 seconds |
|
| ||
|
| 1MIN | : 1 minute | 3MIN | : 3 minutes | |
|
| 2MIN | : 2 minutes | 5MIN | : 5 minutes | |
|
| Memo |
|
|
| |
|
| To prevent damage, please set as short a time interval as possi- | ||||
|
| ble. |
|
|
|
|
LONG PAUSE | F.ADV | Use this menu item to set the action to be done when the unit has | ||||
TIME | been left in the STILL mode for an extended period of time. In the | |||||
|
| case that the unit had been left in the recording pause or STOP | ||||
|
| mode, the unit will go into the Standby Off mode. | ||||
|
| F.ADV : It advances in the forward direction. On the 6th advance- | ||||
|
| ment, it goes into the STOP state. | ||||
|
|
56 | 57 |